Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Infrared (IR) camera"”.
-
A Millimeter-Wave Radar and Kinect Depth Camera for Non-Contact Respiratory Sensing
Remote, non-contact respiratory sensing has gained interest in the past decade with the dawn of cheaper microwave integrated circuits and optical devices. The need for an inexpensive and portable respiratory monitor is in particular demand in a hospital setting as the respiratory rate provides …
-
Experimental Measurements of Heat Transfer from a Cylinder to Turbulent Isothermal and Non-Isothermal Jets
… at the same temperature as the ambient air while the non-isothermal jet is discharged vertically upwards and vertically downwards at a temperature colder than the ambient air. Temperature measurements are made on a heated cylinder using an infrared (IR) camera at five equal impinging …
-
Infrared Imaging Decision Aid Tools for Diagnosis of Necrotizing Enterocolitis
… a color and depth (RGB-D) sensor with an infrared (IR) camera is proposed for NEC diagnosis. A design for sensors configuration and a data acquisition process are introduced. A calibration method between the three cameras is described which aims to ensure frames synchronization and …
-
Height Estimation of a Blimp Unmanned Aerial Vehicle Using Inertial Measurement Unit and Infrared Camera
… or unfavorable conditions. Lighter-than-air UAVs such as blimps can carry higher payloads and can stay longer in the air compared to typical heavier-than-air UAVs such as aeroplanes or quadrotors. One purpose of this thesis is to develop a sensor suite basis for estimating the position and …
-
Using Infrared Thermography to Image the Drying of Polymer Surfaces
… Although this heating can be measured with an Infrared (IR) camera, the sensitivity is often not sufficient to recognize the point at which the film breaks. Complicating the measurement is the changing emissivity that commonly occurs as objects dry. The sensitivity and emissivity issues can be …
-
The influence of hole geometry and metering length on flm cooling effectiveness of laid-back fan-shaped holes in compressible high-speed flow conditions
… measurements over an adiabatic surface with an Infrared (IR) camera recording surface temperature measurements. Results highlight that shorter metering lengths generally provide superior cooling, particularly under increasing pressure ratios. An investigation was done to determine how well film …
-
Melt Pool Feature Extraction, A State-Space Model and Spatial Layer-to-Layer Control for Powder Bed Fusion
… a major problem in industrial applications. An InfraRed (IR) camera is a common tool to monitor a surface temperature field and melt pool morphology in PBF. With melt pool features from camera videos, manufacturing researchers use spatial feature maps to visualize defect locations and control …
-
Point clouds and thermal data fusion for automated gbXML-based building geometry model generation
… building energy efficiency and reducing environmental impacts. However, manually measuring as-is conditions of building envelops including geometry and thermal value is still a labor-intensive, costly, and slow process. Thus, the primary objective of this research was to automatically …
-
A numerical and experimental investigation of a subsurface step using flash thermography
… surface temperature response, measured with an infrared (IR) camera. Heat flow into a defect-free sample is described by a 1-D diffusion model, which transitions to higher dimensions due to subsurface discontinuities. 1-D approaches can be unreliable in the vicinity of abrupt thickness change, …
-
Photo-Induced typography with vanadium dioxide thin films
… electrical current or voltage. VO2 exhibits a first-order reversible metal-insulator phase transition (MIT) which is typically accompanied by almost five orders of magnitude change in electrical conductivity. The ability to trigger the phase transition via optical excitation allows for producing …
-
Thermal imaging and infrared scene projector based on vo2 films and scanning mirrors
… thesis, we describe two different methods of infrared (IR) and thermal imaging. The first approach is generating rewritable patterns in the optical communications band using a combination of pump-probe technique, a scanning mirror and an infrared (IR) camera. The sample used in these …
-
Exploration of Augmenting Tower-Based RF Equipment Visual Inspections With Infrared Cameras
… benefits and limitations of integrating infrared (IR) cameras into tower-mounted Radio Frequency (RF) equipment visual inspections. These inspections are critical for assessing risks posed by age-related degradation and environmental impacts to safeguard from failure or malfunction. The …
-
The mechanics of defect detection in vibrothermography
… defects. Frictional heating is observed using an infrared (IR) camera and is used to determine the presence and location of defects. There is a large industrial interest in vibrothermography due to its ability to rapidly detect defects over a large area. Another motivation for using this …
-
Heat transfer analysis of thermoelectric driven swirling flow
… heat flux without significant evaporation. A swirling flow pattern was observed during the experiment which was firstly believed to be Marangoni effect. To reveal the truth of this flow the Solid/Liquid Lithium Divertor Experiment (SLiDE) was constructed at University of Illinois, Center for …
-
Thermal phenomena and power balance in a helicon plasma
… dielectric tube, which is radially confined and directed towards the rocket nozzle by an axial magnetic field. An ion cyclotron heating antenna further heats the ions, and a magnetic nozzle accelerates the plasma along the confining magnetic field as it leaves the rocket, ultimately allowing it to …
-
Induction Infrared Thermography for Non-Destructive Evaluation of Alloy Sensitization
… a comprehensive, in-place process is desirable. This thesis will focus specifically on non-destructive evaluation of sensitization seen as a result of welding steel plates using induction infrared thermography (IIRT). This process uses an induction coil to generate heat within a sample …
-
Early Forest Fire Detection Using Texture, Blob Threshold, and Motion Analysis of Principal Components
Forest fires constantly threaten ecological systems, infrastructure and human lives. The purpose behind this study is minimizing the devastating damage caused by forest fires. Since it is impossible to completely avoid their occurrences, it is essential to accomplish a fast and appropriate …
-
Fiber Optic Sensing of Strain and Temperature for Structures in a Hypersonic Flow
… (FBG) networks has the potential to benefit aircrafthealth monitoring systems. The overall goal of this thesis research is to demonstrate that FBG sensors can be used to measure temperature and strain data of a structure in a hypersonic flow. To that end, the design and testing of a five-fiber …
-
Infrared imaging spectrometer for measurement of temperature in high-speed events
… the weapon more potent. In most cases, due to aircraft weight limitations, the delivery of more payload is not an option. Therefore, improving the destructive power of a weapon of a given payload requires the use of more powerful explosives. However, when the potency of an explosive is …
-
Evaluation of commercially available moisture-sensing devices to monitor feather wetness
… devices using varying techniques, an infrared (IR) camera, and one type of moisture-sensitive paper was evaluated in two experiments; using artificial feather beds in laboratory settings and in field conditions using live birds. In the first experiment (lab testing-phase I), seven …
Page 1 of 2