Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 179 for “"Infrared Detectors"”.

  1. Infrared Detectors for Radiation Thermometry

    … into the potential next generation of infrared detectors for radiation thermometry. Motivations for this work include increased detector sensitivity, development of minimally cooled mid-wave infrared (MWIR) arrays and longer wavelength multi-colour ratio radiation thermometers. The high …

    whiterose Download PDF for Infrared Detectors for Radiation Thermometry (opens in a new tab)

  2. Wafer Level Characterization of Infrared Detectors

    … wafer level fabrication process for these detectors. A recent DARPA program called Wafer level Infrared Detectors (WIRED) is exploring new integration schemes for developing low cost photonic detectors, which have higher speed and sensitivity compared to thermal detectors. Such efforts will …

    unm Repository record for Wafer Level Characterization of Infrared Detectors (opens in a new tab)

  3. RF sputtered Hg¿-XCdXTe infrared detectors

    … found to vary with sputter deposition rate. The detectors exhibited both photoconductive and photovoltaic response. The photovoltage was believed to have been due to a graded band gap, induced by the composition gradient. Spectral response ranged from less than 4 microns to more than 14 microns. …

    rice Repository record for RF sputtered Hg¿-XCdXTe infrared detectors (opens in a new tab)

  4. Advanced quantum structures for infrared detectors

    … the more established bulk material systems for infrared (IR) photodetection. This is due to predicted fundamental advantages, such as the tunability of the band gap and theoretically reduced Auger recombination rates. However, the superiority of these materials has not been experimentally …

    bu Repository record for Advanced quantum structures for infrared detectors (opens in a new tab)

  5. Advanced infrared detectors for future missile seekers

    … to design and fabricate a self-filtering infrared detector (SFD) optimized for a specific target signature. The SFD was prepared from vacuum deposited, composition-tuned epitaxial films of the semiconductor alloy, PbS(x)Se(1-x). A filter and detector layer were both grown on opposite sides …

    nps Repository record for Advanced infrared detectors for future missile seekers (opens in a new tab)

  6. Field-effect transistors as tunable infrared detectors

    … In Part I, we present a theory of tun- able infrared response in metal-oxide-semiconductor field-effect transistor. Multipole plasmons are localized collective electronic oscillations which arise from a nonuniform density of electrons. We investigate whether multipole plasmons in …

    utk-theses Repository record for Field-effect transistors as tunable infrared detectors (opens in a new tab)

  7. Antimony-based type-II superlattice infrared detectors

    … applications within the mid- and long-wavelength infrared are driving the search for efficient and cost effective detection technologies in this regime. Theoretical calculations have predicted high performance for InAs/GaSb type-II superlattice structures, which rely on mature growth of III-V …

    uiuc Repository record for Antimony-based type-II superlattice infrared detectors (opens in a new tab)

  8. Predictive modeling of infrared detectors and material systems

    Detectors sensitive to thermal and reflected infrared radiation are widely used for night-vision, communications, thermography, and object tracking among other military, industrial, and commercial applications. System requirements for the next generation of ultra-high-performance infrared detectors …

    bu Repository record for Predictive modeling of infrared detectors and material systems (opens in a new tab)

  9. Uncooled infrared detectors based on nanometer-thin metal films

    Infrared detectors allow the remote and contactless measurement of the temperature of an object through radiometry. By using an array of multiple IR sensors assembled into a camera, a thermal image of a scene can be collected without the need for illumination. The applications for early infrared …

    freiburg-diss Repository record for Uncooled infrared detectors based on nanometer-thin metal films (opens in a new tab)

  10. Iii-V Multiple Quantum Well Long-Wavelength Infrared Detectors

    … sensitive, low-cost, large long wavelength infrared focal-plane arrays.

    uiuc Repository record for Iii-V Multiple Quantum Well Long-Wavelength Infrared Detectors (opens in a new tab)

  11. Aluminum nitride microelectromechanical infrared detectors with integrated metamaterial absorbers

    … development of uncooled spectrally selective mid-infrared (IR) detectors based on the seamless integration of metamaterial (MM) structures with microelectromechanical (MEMS) AlN resonators. Historically, uncooled absorbers have been limited in two key metrics: selectivity, the ability to …

    uiuc Repository record for Aluminum nitride microelectromechanical infrared detectors with integrated metamaterial absorbers (opens in a new tab)

  12. Investigation of Infrared Detectors Based on the Gallium-free Superlattice

    Infrared detection has proven to be an essential capability in a variety of fields, primarily the medical and defense fields. The current industry standard material is HgCdTe, which has been developing since its inception in the late 1950s. SLS materials are created from very thin layers, on the …

    unm Repository record for Investigation of Infrared Detectors Based on the Gallium-free Superlattice (opens in a new tab)

  13. Temperature dependence of dark current in quantum well infrared detectors

    The I-V characteristics of a bound-to-continuum QWIP device with Al0.37Ga0.63As barriers of 23 nm, In0.1Ga0.9As wells of 3.6 nm, and a doping density (nd) of 1018 cm-3 were gathered and analyzed for various temperatures. The device was cooled with a closed cycle refrigerator, and the data were …

    nps Repository record for Temperature dependence of dark current in quantum well infrared detectors (opens in a new tab)

  14. Antenna coupled infrared detectors for wavelength selectivity or broadband absorption

    An approach for designing antenna coupled infrared detectors (planar multimode detectors) for wavelength selectivity, and dielectric coated Salisbury Screen and Jaumann Absorber for wavelength selectivity and broad band absorption is presented. Calculations of electromagnetic behaviors of the …

    texas Repository record for Antenna coupled infrared detectors for wavelength selectivity or broadband absorption (opens in a new tab)

  15. Dark Current and Persistence in HgCdTe-on-Si Infrared Detectors

    … mercury-cadmium-telluride-on-silicon (MCT-on-Si) infrared detector arrays, with particular emphasis on the impact of the heteroepitaxial silicon growth process on dark current and persistence characteristics. Infrared detectors have been the cornerstone of astronomical discovery for the past four …

    rit Repository record for Dark Current and Persistence in HgCdTe-on-Si Infrared Detectors (opens in a new tab)

  16. InAs/Ga(In)Sb superlattice based infrared detectors using nBn design

    Infrared detectors in the mid-wave infrared (MWIR) (3-5μm) and long-wave infrared (LWIR) (8-12μm) have many applications in military, industrial and medical fields. The state-of-the-art photodetectors based on Hg1-xCdxTe (MCT) have large signal over noise ratio and their bandgap can be tuned to …

    unm Repository record for InAs/Ga(In)Sb superlattice based infrared detectors using nBn design (opens in a new tab)

  17. Quantum 1/f noise in infrared detectors and scanning tunneling microscopes

    "Noise is, by definition, any random and persistent disturbance, which interferes with the clarity of a signal. Modern electronic devices are designed to limit noise, and in most cases the classical forms of noise have been eliminated or greatly reduced through careful design. However, there is a …

    must-thes Repository record for Quantum 1/f noise in infrared detectors and scanning tunneling microscopes (opens in a new tab)

  18. Thin-film Pb(0.9)Sn(0.1)Se photoconductive infrared detectors : photoconductivity measurements.

    Pb(0.9)Sn(0.1)Se thin films were deposited on cleaved CaF(2) and BaF(2) substrates by vacuum evaporation methods. The as-deposited films were not photosensitive. Photoconductivity was observed after the films had been isothermally annealed in Pb-Sn rich vapor to reduce their carrier concentrations. …

    nps Repository record for Thin-film Pb(0.9)Sn(0.1)Se photoconductive infrared detectors : photoconductivity measurements. (opens in a new tab)

Page 1 of 9