Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Infrared Thermometry"”.
-
MONITORING WATER STRESS IN SOYBEANS WITH REMOTE SENSING TECHNIQUES (THEMATIC MAPPER, MULTISPECTRAL SCANNER, LANDSAT-D, INFRARED THERMOMETRY, AGRICULTURAL METEOROLOGY)
… were measured using a Telatemp Ag-42 infrared thermometer. The field research was conducted at the University of Nebraska Sandhills Agricultural Laboratory located in central Nebraska. Four data sets (one for bare soil and three for soybeans) were used to evaluate the performance of …
-
TRANSIENT TEMPERATURE MEASUREMENTS OF COMBUSTOR WALLS ENCLOSING A 2-D MODEL COAXIAL INJECTOR
… Biot number and low Fourier number conditions. Infrared thermometry technique was applied to obtain outer wall temperature distribution at three different wall thicknesses, and these measurements were combined with the transient analysis to calibrate the amount of heat transfer and the …
-
Experimental Observation and Measurements of Pool Boiling Heat Transfer using PIV, Shadowgraphy, RICM Techniques
… were obtained in shadowgraphy measurements. Infrared thermometry with an IR camera was used for observation of temperature fluctuations of nucleation sites. The experiments were taken for the heat flux from 0.042 kW/m^2 to 0.266 kW/m^2, six experimental conditions in total. To provide a …
-
Forced Convective Boiling via Infrared Thermography
… study is to develop, validate, and use a unique infrared thermometry method to quantify the heat transfer characteristics of flow boiling in earth gravity, prior to use of the apparatus in variable gravity environments. This new method allows high spatial and temporal resolution measurements, …
-
A prospective cohort study of foot temperature and claw horn disruption lesions in non-lame dairy cows.
… recorded from the plantar pastern area using infrared thermometry, could accurately predict the presence and severity of CHDL’s in non-lame post-partum dairy cows. <br/><br/>For this purpose the temperature of the hind feet of 112 cows were recorded three times a week for the first eight to …
-
Continuous canopy temperature as a tool for managing deficit irrigation
… costly and labor intensive. The innovation in infrared thermometry systems has allowed for the technology to become smaller and more cost efficient. This investigation uses the established method of BIOTIC developed by research scientist at USDA/ARS. The BIOTIC method has been patented and …
-
COMPLEX COLLOIDAL MATERIALS VIA INTERFACIAL ENGINEERING
… of a colloidal suspension are investigated using infrared thermometry of a microfluidic platform, potentially displaying unique interfacial behavior. This work thus aims to expand the palette of colloidal stabilizers and potential colloidal morphologies possible while providing fundamental …
-
In-Situ Surface Deformation and IR Emission Measurements for Solid Oxide Fuel Cells
… that integrates Sagnac interferometry and infrared thermometry for in-situ anode surface deformation, electrode surface reaction investigation and surface temperature measurement for SOFCs. The experimental results obtained under different operating conditions, such as hydrogen, simulated …
-
TWO-PHASE HEAT TRANSFER MECHANISMS WITHIN PLATE HEAT EXCHANGERS: EXPERIMENTS AND MODELING
… study is to develop, validate, and use a unique infrared thermometry method to quantify the heat transfer characteristics of flow boiling within different Plate Heat Exchanger geometries. This new method allows high spatial and temporal resolution measurements. Furthermore quasi-local pressure …
-
Multi-Scale Experiments in Turbulent Subcooled Boiling Flow Through a Square Channel with a Single Heated Wall
… phase dynamics. 3) Laser induced fluorescence thermometry (LIF) to measure whole-field liquid temperature fields. 4) High-speed infrared thermometry (IR-T), to study the impact of the boiling level on the heated wall temperature. A series of sensitivity studies were performed with which, …
-
Growth and water relations of Bt and non-Bt corn plants subjected to soil moisture stress
… this method is more suitable than porometry or infrared thermometry for plant transpiration measurements under varying environmental conditions. A stress index was derived from transpiration measured 15 to 18 days after silking which could be used as a simple yield forecasting tool by decision …
-
Integration of plant-based canopy sensors for site-specific nitrogen management
… Lastly, we evaluated the crop water status using infrared thermometry integrated with optical and ultrasonic sensors, we concluded that the integration of sensors was beneficial to detect water-stressed zones in the field, affecting yield and possibly promising to delineate zones for N and water …
-
Experimental and computational investigation of combustion phenomena in mesoscale ducts
… selection and geometry on the regime boundaries. Infrared thermometry was utilized in order to determine the wall temperature distributions for different flame phenomenologies and to test the hypothesis that the moving nature of an oscillating flame will more uniformly distribute enthalpy …
-
Precision Drought Stress in Orchards: Rootstock Evaluation, Trunk Hydration and Canopy Temperature
… regard to canopy temperature measurements using infrared thermometry and measurements of trunk hydration using electromagnetic moisture sensors.
-
MORPHOLOGY OF UNCONFINED AND CONFINED SWIRLING FLOWS UNDER NON-REACTING AND COMBUSTION CONDITIONS
… (PIV), optical emission spectroscopy (OES), infrared (IR) thermometry, gas analysis and computer compensated micro-thermocouple measurements, were used for diagnostics. These diagnostics provided information on spatial and temporal distribution of flowfield, flame generated radicals, mean gas …
-
Joule-Heated Catalytic Reactors: Kinetic Interpretation, Thermal Gradient Analysis, and Dynamic Pulse Operation for Endothermic Chemical Processes
… dehydrogenation over Pt-carbon felts. In situ infrared thermometry and kinetic analysis are used to demonstrate the importance of accounting for reactor non-isothermality and the combined contributions of gas-phase and catalytic reactions when interpreting Joule-heated reactor performance. …
-
New strategies for row-crop management based on cost-effective remote sensors
… been developed, seeking to compare the use of infrared thermometry and thermal imaging to determine the water status of two most relevant row-crops in the region, sugar beet and super high-density olive orchards. From the data obtained, the use of an airborne low-cost infrared sensor to …
-
Reliability, power dissipation, sensing, and thermal transport in carbon nanomaterials and devices
… their surrounding bulk environments. We then use infrared thermometry to investigate power dissipation in carbon nanotube network (CNN) transistors and find the formation of distinct hot spots during operation. However, the average CNN temperature at breakdown is significantly lower than expected …
-
Thermal homogeneity and energy efficiency in single screw extrusion of polymers. The use of in-process metrology to quantify the effects of process conditions, polymer rheology, screw geometry and extruder scale on melt temperature and specific energy consumption
… the entrance to the extruder die. Moreover, an infrared sensor flush mounted at the end of the extruder barrel was used to measure non-invasive melt temperature profiles across the width of the screw channel in the metering section of the extruder screw. Both techniques were found to provide …
-
Thermal homogeneity and energy efficiency in single screw extrusion of polymers. The use of in-process metrology to quantify the effects of process conditions, polymer rheology, screw geometry and extruder scale on melt temperature and specific energy consumption
… the entrance to the extruder die. Moreover, an infrared sensor flush mounted at the end of the extruder barrel was used to measure non-invasive melt temperature profiles across the width of the screw channel in the metering section of the extruder screw. Both techniques were found to provide …
Page 1 of 2