Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Initial Imperfection"”.
-
Stainless Steel Bridge Girders with Corrugated Webs - A parametric study to investigate the sensitivity of Stainless steel girder’s shear behaviour to intial imperfection
… element, on the other hand, is susceptible to initial imperfection. The aim of this master’s thesis is to research the shear behavior of bridge gird ers with stainless steel corrugated webs and their sensitivity to initial imperfection. This is done by, firstly, a literature review to decide …
-
Finite Element Nonlinear Random Response of Composite Panels of Arbitrary Shape to Acoustic and Thermal Loads Applied Simultaneously
… to smaller strain component. For plate with initial imperfection in deflection, the nonlinear stiffness due to imperfection reduces the random responses as compared to the flat plate. For a plate with an initial imperfection in deflection which has the same maximum deflection as the thermal …
-
An improvement of Southwell's method for determining buckling loads
If an elastic bar with some initial imperfection is subjected to increasing compressive axial load, the lateral deflection, measured anywhere along its length, increases monotonically; the primary buckling mode becoming more and more dominant in the deflected shape. A classical approximate …
-
Predicting the Failure of Aluminum Exposed to Simulated Fire and Mechanical Loading Using Finite Element Modeling
… the plate was also studied. The influence of the initial imperfection of the plates was also studied. Not only were the physical conditions of the model varied but the element type of both the solid and shell models as well as the mesh density were also varied. Two different creep laws were used …
-
Imperfection Sensitivity of the Shear Behaviour of Corrugated Web Beams
This thesis investigates the imperfection sensitivity of the shear behavior of stainless steel beams with corrugated webs, with the main objective of verifying the shear resistance design equations in EN 1993-1-5. Firstly, a comprehensive literature study was conducted to acquire deeper knowledge …
-
On the strength and DSM design of end-bolted cold-formed steel columns buckling in distortional modes
… they concern three tests and consist of (i) initial imperfection measurements, (ii) equilibrium paths relating the applied load to key column displacements and (iii) deformed configurations (including the collapse mode) and failure loads. The experimental results are used to validate ANSYS …
-
Nonlinear Dynamic Behavior of Single Walled Carbon Nanotubes with an Initial Geometric Imperfection Using Shell Elasticity Theory
… observations, most of the produced CNTS have imperfection and probably, there is not any ideal CNT without any defect. Therefore, in this study, the effect of imperfection on the nonlinear frequency and dynamic behavior is considered based on both classical and nonlocal shell elasticity …
-
Numerical Simulation of the Nonlinear Response of Composite Plates Under Combined Thermal and Acoustic Loading
… formulation takes into consideration a possible initial imperfection in the flatness of the plate. High decibel sound pressure levels along with high thermal gradients across thickness drive the plate response into nonlinear regimes. This calls for the analysis to use von Karman large deflection …
-
Investigation of the Lateraltorsional Buckling Behaviour of Engineered Wood I-Joists with Varying End Conditions
… take into account actual end conditions and initial imperfection which might have a significant impact on the buckling behavior of beams. The current research project aims to investigate the lateral torsional buckling of wooden I-joists. A total of 41 joists were tested using various …
-
Buckling of a steel plate subjected to axial compression loading of various load rates
… carried out on the plate where the effect of initial imperfection, boundary conditions and material properties were studied. In the numerical analyses both material and geometric non-linearity was considered. Dynamic structural response (load, plastic strain, deformations) of the steel plate …
-
Distortional-global interaction in cold-formed steel lipped channel columns: buckling analysis, structural behavior and strength
… program generates the modal shapes and insert as initial geometric imperfections in the finite element software ANSYS, in order to perform a geometric and material nonlinear analysis. Both, the FStr program and the finite element model are validated with available numerical examples and laboratory …
-
Multimode Nonlinear Vibration Analysis of Stiffened Functionally Graded Double Curved Shells in a Thermal Environment
… parameters, temperature depended materials and initial imperfection on the nonlinear response of the stiffened shell are considered and discussed. This dissertation showed that the nonlinear study of problems of thin-walled structures with even stiffeners is of paramount importance. It was also …
-
Nonlinear Behavior of Systems with Multiple Equilibria
… as a result, the structure will snap back to its initial configuration spontaneously. A set of 3D-printed arches on both sides of the critical boundary are produced for verification purposes. The results have also been extended to thermal conditions. Finally, as a real high-dimensional system, the …
-
Experimental and analytical studies of cold-formed thin-walled frameworks with semi-rigid connections
… axial load effects, member plasticity, initial imperfection and shortening due to flexure. Using the theoretical analysis, the full loading history of the framework can be traced up to the final failure load. Results are finally presented graphically and in tabulated form. Details of an …
-
The use of generalized beam theory, finite elements and experimental testing to investigate the stability of light gauge steel sections subject to axial load
… geometric analyses with the post-buckling and initial imperfection effects were addressed. Finally, for validation purposes, a set of 36 cold-formed steel samples (lipped C-section and Zed-section) members with different boundary conditions (pinned and fixed end conditions) were tested in the …
-
Nonlinear Dynamic Behaviour of Solar Cells with Advanced Materials
… alteration, wind load, elastic foundations, initial imperfection, active layer, blast impact, and multiple impulse loadings, on mechanical attributes and structure response under disparate support conditions have been identified systematically. By determining the optimal parameters of novel …
-
Nonlinear dynamic analysis and quantification of additive manufacturing error on the stability of lattice-core composite sandwich plate
… factors such as the geometry, relative density, initial imperfection and damping are established, which provides new insights into the role of structural design. While in the stochastic analysis, the potential influence of AM errors can be quantified with statistical information including the …
-
Column design for axial compression and end rotation.
… end-rotations of the columns and the effects of imperfections. Therefore the approach is similar to classic second-order rigidplastic analysis but with the important additions of actual end-rotations and an initial imperfection. The method has been verified by physical tests on full-scale columns …
-
Analysis and optimal design of pressurized, imperfect, anisotropic ring-stiffened cylinders
… indicate that the presence of the axisymmetric initial imperfection in the cylinder wall can significantly affect the optimal designs. Weight savings associated with the addition of two rings to the unstiffened cylinder and/or the addition of internal pressure is substantial when torsion makes …
-
Stability of precast prestressed concrete bridge girders considering imperfections and thermal effects
… An emphasis was placed on the effects of initial imperfections on the stability behavior; the effect elastomeric bearing pads and support rotational stiffness was investigated. The experimental study involved testing six rectangular prestressed concrete beams for lateral-torsional …
Page 1 of 2