Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Injection Molds"”.

  1. Gate design for injection molds

    … be in DOC feed-forward control applications for injection molding cycles. Several improvements can be made on this model. First, a more detailed analysis should yield a better relationship between the volumetric flow rate and the pressure at a given point. This is necessary because the volumetric …

    vt Repository record for Gate design for injection molds (opens in a new tab)

  2. Optimization of conformal cooling channels in 3D printed plastic injection molds

    Plastic injection molding is a versatile process and a major part of the present plastic manufacturing industry. Traditional die design is limited to straight (drilled) cooling channels, which dont impart optimal thermal (or thermos-mechanical) per- formance. Moreover, reducing the cycle time in …

    iupui Repository record for Optimization of conformal cooling channels in 3D printed plastic injection molds (opens in a new tab)

  3. Design of plastics injection molds for short-run production: a rapid prototyping approach

    … and guidelines to design or redesign plastics injection molds for short-run production. In order to accomplish this goal, several rapid prototyping technologies were analyzed for possible applications to this field. This study also lead to the design and construction of a modular mold base for …

    iastate Repository record for Design of plastics injection molds for short-run production: a rapid prototyping approach (opens in a new tab)

  4. An Analogy Based Costing System For Injection Molds Based Upon Geometry Similarity With Wavelets

    The injection molding industry is large and diversified. However there is no universally accepted way to bid molds, despite the fact that the mold and related design comprise 50% of the total cost of an injection-molded part over its lifetime. This is due to both the structure of the industry and …

    ucf Repository record for An Analogy Based Costing System For Injection Molds Based Upon Geometry Similarity With Wavelets (opens in a new tab)

  5. Analysis of the effects of wear and tear of gates and runners in the injection molding process for multi-cavity injection molds in natural imbalance

    … and runners due to wear and tear in multi-cavity injection molding. The effect of wear and tear of gates and runners of circular and rectangular geometries, using the flow analysis package MOLDFLOW have been studied. A mold with two rectangular cavities of volume in the ratio 2:1 has been taken as …

    njit Repository record for Analysis of the effects of wear and tear of gates and runners in the injection molding process for multi-cavity injection molds in natural imbalance (opens in a new tab)

  6. Investigating the Effects of Controllable Parameters on Cold-wire Gas Tungsten Arc Weld Bead Geometry

    … (GTAW) is widely used for refurbishing plastic injection molds. This welding process can provide the high quality weld that is required for molds that will be subject to high temperatures and pressures during production. This refurbishing weld process is currently performed manually, which …

    waterloo Repository record for Investigating the Effects of Controllable Parameters on Cold-wire Gas Tungsten Arc Weld Bead Geometry (opens in a new tab)

  7. Estudo da usinabilidade de ligas de ferro fundido branco alto-cromo (FFBAC) em condições criogênicas com vistas à fabricação de moldes de injeção de plástico

    … alternative for the manufacture of plastic injection molds used in the automotive industry, which are normally made of AISI P20 tool steel, which has a high market value, in addition to being produced in batches. In the case of HCWCI, the blocks where the various shapes of a mold are …

    brazil-ufrn Repository record for Estudo da usinabilidade de ligas de ferro fundido branco alto-cromo (FFBAC) em condições criogênicas com vistas à fabricação de moldes de injeção de plástico (opens in a new tab)

  8. Analysis of the influence of natural wear and tear in gates and runners on the filling of a balanced multi-cavity injection mold

    <p>Design of injection molds is outmost important in the manufacture of parts. Its components runners and gates significantly influence the mold filling. Using a simulation package for injection molding a balanced multi-cavity mold was designed. Wear in the gates of runner was simulated by varying …

    njit Repository record for Analysis of the influence of natural wear and tear in gates and runners on the filling of a balanced multi-cavity injection mold (opens in a new tab)

  9. En förstudie inför framtagningen av en formsprutad baklucka

    … in the spring of 2020. Plastal is a company that injection molds and distributes plastic components such as bumpers and side panels for the automotive industry. The purpose of this work is to see if it's possible for Plastal to make injection molded tailgates. In that case Plastal could expand …

    chalmers Repository record for En förstudie inför framtagningen av en formsprutad baklucka (opens in a new tab)

  10. Μελέτη και κατασκευή καλουπιών για παραγωγή πλαστικών μερών οχημάτων

    … εξετάζει την κατασκευή και δημιουργία καλουπιών injection molds για την παραγωγή πλαστικών μερών οχημάτων. Στην παρούσα εργασία θα μελετηθούν καλούπια έγχυσης πλαστικών καθώς και ο σχεδιασμός και κατασκευή αυτών με τη χρήση προγραμμάτων CAD/CAM. Η εργασία θα εξετάζει τη διαδικασία έγχυσης …

    athens Repository record for Μελέτη και κατασκευή καλουπιών για παραγωγή πλαστικών μερών οχημάτων (opens in a new tab)

  11. Construction, evaluation, and use of a fluoroimmunochemical-based fiber optic microscale regenerable biosensor

    … utilizing a molding concept. By using resin injection molds, the two components of the MRB2 (sensing tip and chamber) can be fabricated more reproducibly and with greater flexibility of design and materials than was possible with the MRBl. Modification of the sensing chamber is discussed. …

    utk-theses Repository record for Construction, evaluation, and use of a fluoroimmunochemical-based fiber optic microscale regenerable biosensor (opens in a new tab)

  12. 3D-finishing of metal components manufactured by the powder bed fusion process

    … particularly for demanding applications such as injection molds, combustion engine pistons, and paper rolling machines. The absence of standardized machining allowances for PBF-LB components and the limited understanding of geometric deviations during post-processing further hinder its industrial …

    aalto Repository record for 3D-finishing of metal components manufactured by the powder bed fusion process (opens in a new tab)

  13. INJECTION MOLDING OF MICRO-FEATURES

    … materials enables the use of treated surfaces on injection molds. This surface control is used for manufacturing products with controllable optical, tribological, heat transfer, and surface tension properties. However, the flow, filling, and solidification behavior of molten polymer at the micro …

    clemson Repository record for INJECTION MOLDING OF MICRO-FEATURES (opens in a new tab)

  14. Ultrasonic welding of thermoplastics

    … of specimen by designing and manufacturing injection molds. Tensile testing in shear was performed for measuring lap shear strength of joints after being welded ultrasonically at constant strain rate of 3.24 mm/minute. Maximum LSS (lap shear strength) of 17 MPa and 6 MPa were found for ABS …

    whiterose Repository record for Ultrasonic welding of thermoplastics (opens in a new tab) Download PDF for Ultrasonic welding of thermoplastics (opens in a new tab)

  15. Selective laser sintering and post-processing of fully ferrous components

    … these components limiting their use in many non-injection-molding structural applications, particularly at elevated temperature. In the present work, an attempt has been made to replace the copper-based infiltrant considering cast iron as a potential infiltrant because of its fluidity, hardness …

    texas Repository record for Selective laser sintering and post-processing of fully ferrous components (opens in a new tab)

  16. Optimalizace technologických parametrů vstřikování plastového dílce

    Diplomová práce se zabývá optimalizací vstřikovacích parametrů při uvádění vstřikovací formy do výroby. V úvodu se nachází studie plastů, vstřikovacích forem, vstřikovacích strojů, samotných vstřikovacích parametrů a jejich vliv na kvalitu. Návrhová část zahrnuje analýzu současného stavu, výpočet …

    brno-tech Repository record for Optimalizace technologických parametrů vstřikování plastového dílce (opens in a new tab)

  17. Návrh rozmístění technologie provozu "nástrojárny" pro výrobu forem

    Cieľom tejto práce bolo vyhotovenie technologického návrhu dispozičného riešenia nástrojárne. Našou prvou úlohou bola definícia výrobného sortimentu. Následne sme boli schopní určiť technologické a strojné vybavenie potrebné na realizáciu zákaziek. V dokumente sa ďalej pojednáva o potrebách …

    brno-tech Repository record for Návrh rozmístění technologie provozu "nástrojárny" pro výrobu forem (opens in a new tab)

  18. Výroba součásti "Madlo"

    Práce předkládá návrh konstrukčního řešení formy pro zadanou součást. Na základě literární studie problematiky vstřikování plastů a výpočtů byla navržena vstřikovací forma se všemi náležitostmi. Určení násobnosti formy, velikost rozvodných kanálů, temperační a vyhazovací systém. Forma je z velké …

    brno-tech Repository record for Výroba součásti "Madlo" (opens in a new tab)

  19. Optimalizace jádra formy na vstřikování plastů

    Diplomová práce vznikla ve spolupráci s průmyslovým partnerem, který vyrábí elektrické komponenty pro automobilový průmysl. Tato firma se potýká s problémy často se porušujících jader v některých jejich formách na vstřikování plastů, vyrábějících převážně housingy pro konektory. Firma disponuje …

    brno-tech Repository record for Optimalizace jádra formy na vstřikování plastů (opens in a new tab)

  20. Investigating the thermally grown oxides and attributed effects of scales on heat transfer and interfacial friction between the ingot and die during the open-die forging process

    … forging to serve the industries of plastic injection molds, automotive, aerospace, oil and gas, construction, and mining. However, the company has experienced over hundred kilograms of material waste for each ingot due to thermal oxidation. The ingot temperature gradient, which is affected …

    ets-quebec Download PDF for Investigating the thermally grown oxides and attributed effects of scales on heat transfer and interfacial friction between the ingot and die during the open-die forging process (opens in a new tab)

Page 1 of 2