Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 433 for “"Injection Rate"”.
-
Investigating statistical techniques to infer interwell connectivity from production and injection rate fluctuations
… in successful reservoir management. In water injection projects, a knowledge of reservoir heterogeneities and discontinuities is particularly important to maximize oil recovery. This research project presents a new technique to quantify communication between injection and production wells in a …
-
A spatio-temporally constrained injection rate threshold for the mitigation of induced seismicity
… is the primary disposal zone for Underground Injection Control (UIC) Class I and II wells across much of the U.S. midcontinent. Increases in wastewater disposal into the Arbuckle Group, linked with production from water-rich unconventional plays, is the inferred cause of a more than 40-fold …
-
Stress-state and injection-rate dependent damage processes during the hydraulic fracturing of granite
… the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to …
-
Machine Learning for Gas Lift Optimization: Minimizing Interventions, Accelerating Injection Rate, and Enhancing Production
… shut-ins, and introduce uncertainty in gas lift injection rates. ML models are successfully trained for four critical targets: determining if gas lift is required (Logistic Regression), predicting the minimum and maximum gas lift injection rates (Gradient Boosting), and estimating the optimal …
-
PARTIAL NEEDLE LIFT AND INJECTION RATE SHAPE EFFECT ON THE FORMATION AND COMBUSTION OF THE DIESEL SPRAY
Fuel direct injection represents one of the key turning points in the development of the Diesel engines. The appeal of this solution has been growing thanks to the parallel advancement in the technology of the injection hardware and in the knowledge of the physics involved in the spray formation …
-
CALIBRATION AND INJECTION RATE SHAPING APPROACHES USING 1D HYDRAULIC DIESEL INJECTOR MODELING FOR GASOLINE COMPRESSION IGNITION APPLICATIONS
… GCI technology. The injector in the fuel injection system (FIS) is a key component driving the efficiency of the combustion phenomena. Subsequently, injection strategies, characteristics, and overall injection quality influence the combustion process and controls certain metrics like fuel …
-
A Study of the Effects of CO2 Injection Rate on the Measured CO2 Capture Efficiency of Domestic Kitchen Range Hoods
… a kitchen exhaust fan to remove pollutants generated during cooking activities. The Texas A&M University RELLIS Energy Efficiency Laboratory (REEL) has developed a testing facility, which complies with the ASTM 3087-18: Standard Test Method for Measuring Capture Efficiency of Domestic …
-
Improving forecasts of injection-induced seismicity
… (HFIS) by assuming a linear relationship between injection rate and the Poisson-distributed background rate (herein called the injection rate driven ETAS model). It showed some predictive skill in forecasting HFIS during the stimulations in 2018 to 2019 at Preston New Road (PNR), UK. However, the …
-
Carbon Injection into Electric Arc Furnace Slags
<p>Recent experiment in our laboratory demonstrates that an increase in slag foamingwith carbon injection rate is limited by slag volume. The current work has identified arelationship between foam height, carbon injection rate and slag volumes, whichpredicts the critical injection rate above which …
-
Analysis of Progressive Failure from Hydrofracturing Tests in Boise Sandstone
… failure, and tensile strength as a function of injection rate for twenty Boise Sandstone specimens. Four injection rates 15.7, 31.4, 62.8, and 125.6 mL/minute were used in the testing. Increasing the injection rate initially increased and then decreased acoustic emission activity. The highest …
-
Modeling and Optimization of Matrix Acidizing in Horizontal Wells in Carbonate Reservoirs
… and acid flux in the formation. The work concentrated on the investigation of the acid flux. Analytical equations for injection rate schedule for different wormhole models. In carbonate acidizing, the existence of the optimum injection rate for wormhole propagation has been confirmed by many …
-
Evaluation of Liquid and Supercritical Carbon Dioxide Fracturing on Tight Sandstone Oil Reservoirs
… without evaluating the influence of fluid injection rate and core length for the effects of fracturing. Hence, as the important parameters in fracturing scheme design, it is necessary to study the effect of injection rate on L-CO2 fracturing and Sc-CO2 fracturing, as well as the effect of …
-
Modification of the Dykstra-Parsons method to incorporate Buckley-Leverett displacement theory for waterfloods
… are individually homogeneous, constant total injection rate, and injector-producer pressure drop for all layers is the same. Main drawbacks of Dykstra-Parsons method are that it does not take into account Buckley-Leverett displacement and the possibility of different oil-water relative …
-
Modeling injection induced fractures and their impact in CO₂ geological storage
… In large-scale geologic CO₂ sequestration, high injection rate is required to satisfy economics and operational considerations. During the injection phase, temperature and pressure of the storage aquifers may vary significantly with the introduced CO₂. These changes would re-distribute the …
-
Numerical Simulation of Proppant Transport in Field-Scale Fractures with the Multi-Phase Particle-In-Cell Method
… proppant concentration, fluid viscosity, and injection rate) on proppant placement. We constructed a 180 m long vertical fracture for simulation. When we injected 40/70 mesh proppants into this field scale fracture, the case studies can be performed. Our simulation results show as follows: • …
-
CO2 Sequestration In, and Residual Gas Recovery From, Depleted Conventional Gas Reservoirs
… (c) confining-layer permeability, (d) CO2 injection rate, and (e) operational strategy. Each parameter was varied to evaluate its effect on the CO2 storage capacity and the residual gas recovery, providing insights into how formation heterogeneity and operational conditions control the …
-
CO2 Sequestration In, and Residual Gas Recovery From, Depleted Conventional Gas Reservoirs
… (c) confining-layer permeability, (d) CO2 injection rate, and (e) operational strategy. Each parameter was varied to evaluate its effect on the CO2 storage capacity and the residual gas recovery, providing insights into how formation heterogeneity and operational conditions control the …
-
CO2 Sequestration In, and Residual Gas Recovery From, Depleted Conventional Gas Reservoirs
… (c) confining-layer permeability, (d) CO2 injection rate, and (e) operational strategy. Each parameter was varied to evaluate its effect on the CO2 storage capacity and the residual gas recovery, providing insights into how formation heterogeneity and operational conditions control the …
-
Experimental Study and Modeling of Gas Trapping in Foam Flow in Porous Media Using a Gas Tracer Technique
… and reduce gas fingering/channeling in gas injection. Gas trapping is a crucial component of foam mobility and diversion for successful foam applications. This dissertation was aimed at a better understanding of gas trapping in foam flow and evaluating the accuracy of the existing gas tracer …
Page 1 of 22