Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Inlet Guide Vane"”.

  1. 2D CFD Simulation of a Circulation Control Inlet Guide Vane

    … computational studies of a circulation control Inlet Guide Vane (IGV) that takes advantage of the Coanda effect for flow vectoring. The IGV in this thesis is an uncambered airfoil that alters circulation around itself by means of a Coanda jet that exhausts along the IGV's trailing edge surface. …

    vt Repository record for 2D CFD Simulation of a Circulation Control Inlet Guide Vane (opens in a new tab)

  2. Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane

    … a flap deflection angle of 40 degrees and an inlet Mach number of 0.3. The Reynolds number based on the overall IGV chord length for these experiments was greater than 500,000. The inlet and exit angles of the IGV at this flap setting were 0 degrees and 55 degrees, respectively. Tests …

    vt Repository record for Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane (opens in a new tab)

  3. Effects of Inlet Guide Vane Flow Control on Forced Response of a Transonic Fan

    … generated by an upstream row of stators or inlet guide vanes. Resonant response to engine order excitation at certain rotor speeds is especially damaging. Studies have shown that flow control by trailing edge blowing (TEB) can reduce stator wake strength and the amplitude of the downstream …

    vt Repository record for Effects of Inlet Guide Vane Flow Control on Forced Response of a Transonic Fan (opens in a new tab)

  4. Investigation of Inlet Guide Vane Wakes in a F109 Turbofan Engine with and without Flow Control

    … to investigate the unsteady wake profiles of an Inlet Guide Vane (IGV) at a typical spacing to the downstream fan at subsonic and transonic relative blade velocities. The sharp trailing-edge vanes were designed to produce a wake profile consistent with modern IGV. Time averaged baseline …

    vt Repository record for Investigation of Inlet Guide Vane Wakes in a F109 Turbofan Engine with and without Flow Control (opens in a new tab)

  5. Improving efficiency of a mine compressed air system

    … underground users. These compressors can have inlet guide vane controls that are effective for controlling airflow. Control valves are also installed on surface or underground for pressure control. Some initiatives affect the inlet guide vane control of the compressors directly. Implementing …

    nwu-za Repository record for Improving efficiency of a mine compressed air system (opens in a new tab)

  6. Roughness impact on turbine vane suction side film cooling effectiveness

    … row of suction side cooling holes on a turbine inlet guide vane. The effects of roughness placement (roughness upstream, downstream, or combined up and downstream of the row of film cooling holes) are investigated. Additionally, for each roughness placement, the effect of mainstream turbulence …

    texas Repository record for Roughness impact on turbine vane suction side film cooling effectiveness (opens in a new tab) Restricted access

  7. Experimental investigation of reversed flow in a compressor cascade

    … one to simulate reversed flow in a compressor inlet guide vane. Three stagger angles were tested for each configuration with an absolute angle of attack range from 70 to 130 degrees. The investigation included total and static pressure measurements upstream and downstream of the cascade as well …

    vt Repository record for Experimental investigation of reversed flow in a compressor cascade (opens in a new tab)

  8. Numerical Study Of A High-speed Miniature Centrifugal Compressor

    … the compressor is composed of a radial inlet guide vane, a radial impeller and an axial-direction diffuser (which reduces the radial size because of smaller diameter). As a result of reduction in size, in order to obtain the required static pressure ratio/rise, the rotating speed of the …

    ucf Repository record for Numerical Study Of A High-speed Miniature Centrifugal Compressor (opens in a new tab)

  9. An experimental study of icing physics and anti-/de-icing techniques for aero-engine icing mitigation

    … in clouds on the exposed surfaces of aero-engine inlet components, such as fan blades and inlet guide vane (IGV), has been widely recognized as a significant hazard to aviation safety in cold weathers. Typical glaze and rime icing process on such aero-engine components would fast change the …

    iastate Repository record for An experimental study of icing physics and anti-/de-icing techniques for aero-engine icing mitigation (opens in a new tab)

  10. Some refinements and applications of the multi-stage axial flow compressor time-dependent mathematical modeling technique

    … lines) with undisturbed flow for three distinct inlet guide vane (IGV) schedules. Example problems using the three-dimensional, time-dependent model included determination of the stability limit reduction caused by pure radial inlet pressure distortion, pure circumferential inlet pressure …

    ut-knoxville Repository record for Some refinements and applications of the multi-stage axial flow compressor time-dependent mathematical modeling technique (opens in a new tab)

  11. Aerodynamics of a Transonic Turbine Vane with a 3D Contoured Endwall, Upstream Purge Flow, and a Backward-Facing Step

    … upstream purge flow on the secondary flow of an inlet guide vane. Three cases were tested in a transonic wind tunnel with an exit Mach number of 0.93-a flat endwall with no upstream purge flow, the same flat endwall with upstream purge flow, and a 3D contoured endwall with upstream purge flow. …

    vt Repository record for Aerodynamics of a Transonic Turbine Vane with a 3D Contoured Endwall, Upstream Purge Flow, and a Backward-Facing Step (opens in a new tab)

  12. Investigation of performance improvements including application of inlet guide vanes to a cross-flow fan

    … model was then used to design a configuration of inlet guide vanes in an effort to increase the loading on the first stage of the fan and gain an improvement in pressure ratio over the baseline cross-flow fan. The CFD results were then compared with experimental results from a cross-flow fan test …

    nps Repository record for Investigation of performance improvements including application of inlet guide vanes to a cross-flow fan (opens in a new tab)

  13. Applicability of specific speed and Zweifel coefficient recommendations to low head axial hydraulic turbines

    … thickness circular arc blade profiles, and no inlet guide vane. Highest efficiency was observed in Computational Fluid Dynamics (CFD) investigations for the designs running at speeds 12-33% that of the speed recommended by the Cordier line. Designs that followed the Zweifel coefficient …

    msu

  14. Aerodynamic inverse design of transonic turbomachinery cascades

    … cascade, a compressor cascade and a turbine inlet guide vane. It is then used to obtain a shock-free design of an impulse transonic cascade and of the ONERA transonic compressor cascade. A parametric study has shown that the blade profile is rather sensitive to the prescribed loading …

    concordia Download PDF for Aerodynamic inverse design of transonic turbomachinery cascades (opens in a new tab)

  15. Cooled Vane Heat Transfer

    … cooling with application to a cooled turbine inlet guide vane was studied with the purpose of developing and validating a model for the thermal load of the vane. As a start, a 2D model of a single slot jet was created and the predicted data compared to experimental data. This comparison showed …

    chalmers Repository record for Cooled Vane Heat Transfer (opens in a new tab)

  16. Thermodynamic Modeling of HVAC Plant Cooling Equipment for Quantification of Energy Savings Through Continuous Commissioning Measures

    … and water-cooled centrifugal chillers with inlet guide vane capacity control (233-677 tons, 12.07%, 5.96%) and with VSD capacity control (210-677 tons, 12.18%, 4.61%). From the chiller models developed, energy consumed by the chiller can be calculated as building cooling loads and fluid …

    tamu Repository record for Thermodynamic Modeling of HVAC Plant Cooling Equipment for Quantification of Energy Savings Through Continuous Commissioning Measures (opens in a new tab)

  17. Experimental investigations on ice accretion process and anti-/de-icing technology for aero-engine icing mitigation

    … on the exposed surfaces of aero-engines, such as inlet lips, spinners, fan rotor blades, and inlet guide vanes. Ice formation on such components can significantly degrade the performance of aero-engines. The ice accretion over the fan blades and spinner surface can also result in an imbalance …

    iastate Repository record for Experimental investigations on ice accretion process and anti-/de-icing technology for aero-engine icing mitigation (opens in a new tab)

Page 1 of 2