Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Inorganic Fillers"”.
-
Modification of biodegradable polyesters with inorganic fillers
… polymers and a potentially bioactive novel inorganic synthetic filler were produced and characterized. Composites were produced by solution mixing of a commercial polylactic acid, as well as a biodegradable thermoplastic polyester based on butylene adipate/succinate, with synthetic …
-
The effect of inorganic fillers on the properties of wood plastic composites
The effect of inorganic fillers including precipitated calcium carbonate (PCC), glass fiber (GF), and nano-clay on properties of structured WPCs was investigated. In PCC-bamboo-polymer hybrid composites, tensile and flexural moduli were improved with increasing PCC content. After silane treatment …
-
The role of particulate inorganic fillers on the tribological behavior of polyphenylene sulphide
… of PPS can be improved further with the use of inorganic fillers. In polymer-metal sliding, the friction and wear behavior depends upon the ability of composites to form a good transfer film on the metal counterface. Fillers are very effective in the formation of this transfer film. There is …
-
Improving the performance of nanocomposite membranes by incorporating inorganic fillers for gas separation
Polymeric membrane-based gas separation process provides an environmentally attractive alternative to gas absorption and adsorption. However, the permeability/selectivity trade-off, the operational stability under aggressive feed gas, and carbon dioxide (CO2)-induced plasticisation behaviour remain …
-
An Investigation of E-glass Structure with Different Filler Material Under Vibration and Bending Loading
… for testing manhole covers made with different inorganic fillers under static and dynamic behavior. The filler would not only improve the mechanical properties of fiber-reinforced polymer matrix composite not otherwise achieved by the resin ingredients alone but also lower the overall …
-
Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)
… of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main …
-
Fundamental studies of oganoclays and polymer nanocomposites
… are commonly reinforced with organic or inorganic fillers to improve their mechanical properties and to reduce the cost. Such reinforcement strongly depends on the characteristics of fillers (e.g. size, shape, aspect ratio and surface feature) and their dispersion in polymer matrix. The …
-
Formulation and Burning Behaviour of Fire Retardant Polyisoprene Rubbers
… black on burning behaviour was compared with inorganic fillers. Within the cone calorimeter, material containing carbon black formed a char-like residue which provides some reduction in the rate heat release, and did not contribute to the fuel load. The use of inorganic fillers yielded more …
-
Advanced Solubility Selective Membrane Materials for CO2 Separation from Light Gases
… introducing ether oxygen functional groups and inorganic fillers to increase the gas solubility selectivity and gas permeability. Chapter 1 provides a general rationale for materials design and highlights polymers with promising CO2/N2 separation properties for CO2 capture from flue gas. Chapter …
-
MIXED MATRIX MEMBRANES BASED ON 6FDA-DURENE POLYIMIDE/ZEOLITIC IMIDAZOLATE FRAMEWORK (ZIF)-71 FOR NATURAL GAS AND HYDROGEN PURIFICATION
… have been demonstrated as potential inorganic fillers for fabricating high performance membranes for gas separation. The newly synthesized ZIF-71 nano-particles were compatibly incorporated in 6FDA-Durene polyimide membranes as novel mixed matrix membranes (MMMs) for gas separation. …
-
Sulfonated Perfluorocyclobutyl (PFCB) Aryl Ether Polymers: Synthesis, Reactivity, and Characterization for Polymer Electrolyte Applications
… synthesized and used as a grafting compound to inorganic fillers. The tailorable synthetic methodology, chemical/physical properties, effect of sulfonation level, block length and cross-linking of copolymers on water uptake, volume swelling, proton conductivity, and thermal properties and their …
-
Analytical studies of the degradation of cellulose nitrate artefacts
… in the degradation and also the influence of inorganic fillers, iron and humidity. It has been concluded that the degradation of cellulose nitrate artefacts is dependent on the presence of sulphate and humidity. The process is diffusion controlled which indicates that loss of plasticiser is a …
-
UV-cured photoluminescent coatings: acrylic and epoxy systems
… materials consists in incorporatingluminescent fillers within a “non-optically active” polymeric matrix leading to composite materials. Several works have been reported in the literature related to emissive polymeric composite materials based on organic dyes, nanoparticles, such as semiconductor …
-
Membranas poliméricas híbridas contendo nanopartículas inorgânicas funcionalizadas para separação de gases
… membranes (MMM) with different polymers and inorganic fillers, which is the object of this study. Specifically, the objective was to develop polyurethane MMMs containing silica nanoparticles loaded with amine grouping to promote a facilitated transport by evaluating the effect of operational …
-
Additive manufacturing of thermosetting polymer nanocomposites
… two approach have been employed in current work: inorganic filler approach, and the all-polymer fillers approach. For the work using inorganic fillers approach, we presents a breakthrough method to 3D-print polyurethane (PU) thermoset objects with hybrid-hardness via direct-ink writing (DIW). …
-
Ανάπτυξη και μελέτη γραμμικών σουλφονωμένων και θερμικά διασυνδεδεμένων αρωματικών πολυμερικών ηλεκτρολυτών
… composite membranes were prepared by adding inorganic fillers (functionalized montmorrilonite with sulfonic groups, SO₃-MMT) in TPS® polymer matrix. In the second part of this thesis thermal cross- linked polymer electrolytes were developed for their use in high temperature PEMFC. Three new …
-
Strategies to design and optimize natural polymers as biomaterial inks for musculoskeletal tissue engineering applications
… self-assembling peptides and incorporation of inorganic fillers. Moreover, the biological outcomes of the scaffolds were tuned with the addition of different bioactive cues (i.e. tropoelastin or bioceramics) providing a versatile platform for the development of biomaterial inks for bone …
-
Mechanical and Fatigue Characterization of Carbon Fiber Reinforced Containing Rubber Micro particles and Silica Nano-Particles
… can be enhanced by reactive liquid rubbers and inorganic fillers. In this study carbon fiber reinforced composites were manufactured using epoxy resin modified by reactive liquid rubber particles carboxyl terminated butadiene acrylonitrile (CTBN) and nanosilica. Since fatigue failure of …
-
Fundamental Studies of Various Poly(L-lactide)/clay Nanocomposite Systems by in-situ Polymerization
… be improved. This can be achieved by dispersing inorganic fillers into the polymer matrix, thus forming an exfoliated polymer nanocomposite. In this study, in situ polymerizations ofpoly(L-lactide)-clay nanocomposites were conducted using various montmorillonite organoclays (PLLA-MMT). When using …
-
A Study of the Erosion Mechanisms of Silicone Rubber Housing Composites
… and erosion test. To this end, the influence of inorganic fillers in silicone rubber on resisting erosion due to dry-band arcing is also presented, as an essential step towards obtaining more suitable silicone composite for DC outdoor insulation applications.
Page 1 of 3