Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 151 for “"Input Energy"”.

  1. Low voltage autonomous buck-boost regulator for wide input energy harvesting

    … can be extended tremendously by enabling energy autonomy. While battery powered electronics last long but they must be replenished once the battery is depleted either by replacing the battery or by retrieving the electronics and then recharging. Instead, energy harvesting from available …

    gatech Repository record for Low voltage autonomous buck-boost regulator for wide input energy harvesting (opens in a new tab)

  2. Disaggregated Seismic Hazard and the Elastic Input Energy Spectrum: An Approach to Design Earthquake Selection

    … characterization of the hazard. The elastic input energy spectrum is an alternative to the elastic response spectrum for these types of analyses. The input energy combines the elements of amplitude and duration into a single parameter description of the ground motion that can be readily …

    vt Repository record for Disaggregated Seismic Hazard and the Elastic Input Energy Spectrum: An Approach to Design Earthquake Selection (opens in a new tab)

  3. An analytical study of dynamic response and nonequivalence of an absolute active cavity radiometer operating at cryogenic temperatures

    … Steady-state relationships between radiative input energy from a uniform diffuse source field and temperature drop between the resistance thermometers and the heat sink are found to be linear. The steady-state sensitivity of the model to a diffuse input field, determined by relating electrical …

    vt Repository record for An analytical study of dynamic response and nonequivalence of an absolute active cavity radiometer operating at cryogenic temperatures (opens in a new tab)

  4. Gain Characteristics of TE CO₂ Laser Amplifier

    … ν₃ mode vibrational temperature with discharge energy enables us to determine the net pumping efficiency to the ν₃ mode levels as a function of input energy. It is found that the ν₃ mode vibrational temperature saturates at high input energy. This saturation sets an upper limit to the gain …

    mcmaster Repository record for Gain Characteristics of TE CO₂ Laser Amplifier (opens in a new tab)

  5. Air-breathing magneto-deflagration thruster for very low Earth orbit

    … constraint over propellant gas dynamics and energy addition leads to the formation of an efficient deflagration wave, capable of reaching thrust to power ratios of ∼4 mN/kW and exhaust velocities ∼40-65 km/s with air that are up to 200% higher than magneto-detonation modes for the same input …

    texas Repository record for Air-breathing magneto-deflagration thruster for very low Earth orbit (opens in a new tab)

  6. Nonlinear forced response of circular cylindrical shells

    … the breathing mode saturates) and the extra energy spills over into the flexural mode. In other words, although the breathing mode is directly excited by the load, it absorbs a small amount of the input energy (responds with a small amplitude) and passes the rest of the input energy into the …

    vt Repository record for Nonlinear forced response of circular cylindrical shells (opens in a new tab)

  7. Multiobjective optimum design of static and seismic-resistant structures with genetic algorithm, fuzzy logic and game theory

    … design and behaviors are investigated. Dynamic input energy for a multidegree-of-freedom structure is formulated. A multiobjective optimization algorithm based on game theory is developed. Fuzzy set theory is introduced to construct a fuzzy constrained environment. A Pareto genetic algorithm is …

    must-thes Repository record for Multiobjective optimum design of static and seismic-resistant structures with genetic algorithm, fuzzy logic and game theory (opens in a new tab)

  8. Modeling and Numerical Investigation of Hot Gas Defrost on a Finned Tube Evaporator Using Computational Fluid Dynamics

    … of running time. It is one way to improve the energy efficiency of refrigeration systems. There are many studies about the defrosting process but none of them use computational fluid dynamics (CFD) simulation. The purpose of this thesis is (1) to develop a defrost model using the commercial CFD …

    calpoly Repository record for Modeling and Numerical Investigation of Hot Gas Defrost on a Finned Tube Evaporator Using Computational Fluid Dynamics (opens in a new tab)

  9. One-Dimensional Analytical Model Development of a Plasma-Based Actuator

    … 84.8 mm<super>3</super> cavity volume, and 0.5 J energy input) operated over a range of frequencies from 1 Hz to 10 kHz shows a decrease in peak momentum corresponding to an actuation cutoff frequency of 800 Hz. The model results show that the cutoff frequency is primarily a function of orifice …

    maryland Repository record for One-Dimensional Analytical Model Development of a Plasma-Based Actuator (opens in a new tab)

  10. Comparisons of Energy Dissipation in Structural Devices with Foundation Soil During Seismic Loading

    The effectiveness of structural energy dissipation mechanisms such as passive energy dissipation devices and base isolation methods used in seismic design depends on their capacity, ductility, energy dissipation, isolation, and self-centering characteristics. Though rocking shallow foundations …

    ndsu Repository record for Comparisons of Energy Dissipation in Structural Devices with Foundation Soil During Seismic Loading (opens in a new tab)

  11. Optimising acoustic cavitation for industrial application

    … sampled at fine increments across the range of input powers available. The primary bubble cluster under the tip is found to undergo subharmonic periodic collapse, with concurrent shock wave emission, at frequencies of f0/m, with m increasing through integer values with increasing tip-vibration …

    glasgow Repository record for Optimising acoustic cavitation for industrial application (opens in a new tab) Download PDF for Optimising acoustic cavitation for industrial application (opens in a new tab)

  12. Electromechanical shutter mechanism

    … a cylindrically imploding blast wave. The input energy capability was 200 joules. The explosion chamber was designed to make use of the reflection of the finite-energy imploding blast wave at the base of the shutter in the track. A qualitative correlation between energy input to the …

    rice Repository record for Electromechanical shutter mechanism (opens in a new tab)

  13. Experimental Assessment of Confinement and Heating on the HIT-SI3 Spheromak

    … Specifically, the mechanisms that determine how input energy is distributed in the spheromak plasma are examined. Thomson Scattering measurements of the HIT-SI3 electron temperature and relative density are used to inform the discussion for discharges driven by steady inductive helicity injection …

    washington Repository record for Experimental Assessment of Confinement and Heating on the HIT-SI3 Spheromak (opens in a new tab)

  14. Photophysics of C60 Colloids

    … of the carbon black particles by absorbed energy. Colloidal C₆₀ particles that are many nanometers in diameter are similar to CBS, so it is posited that they would also have a nonlinear scattering mechanism contributing to their NLO response. Three samples of C₆₀ colloids are characterized …

    arizona-thes Repository record for Photophysics of C60 Colloids (opens in a new tab)

  15. Experimental Evaluation of a Triple-State Sorption Chiller

    … resulting in a 0.7% error in the heat input energy and a 1.3% error in the heat rejection energy.

    carleton Repository record for Experimental Evaluation of a Triple-State Sorption Chiller (opens in a new tab)

  16. Performance Evaluation of a Ground Source Heat Pump System in South Dakota: Winter of 1993-1994

    … results of the performance check, analysis of input energy, and electrical cost and energy breakdown showed that the system was operating within it's [sic] design conditions. The analysis of the soil/pipe overall heat transfer coefficient showed a significant difference between the means of the …

    sdstate Repository record for Performance Evaluation of a Ground Source Heat Pump System in South Dakota: Winter of 1993-1994 (opens in a new tab)

  17. Additive Manufacturing of AZ31B Magnesium Alloy via Friction Stir Deposition

    … the process and for calculation of the average input energy for each processing condition. Temperature during the AFSD experiments was monitored using a type k thermocouple located 4 mm beneath the deposition surface at the center of the deposition track. The average input energy values showed a …

    unt Repository record for Additive Manufacturing of AZ31B Magnesium Alloy via Friction Stir Deposition (opens in a new tab)

  18. Theory of optical nonlinearities in semiconductors: Applications to nonlinear wavemixing and photonic switching.

    … at subnanosecond speeds, with minimum switching energy. Both bistable and two-wavelength operating modes are investigated, with an emphasis on dynamic determination of system characteristics such as contrast, fanout, and differential gain. For bistable semiconductor etalons, the maximum gain …

    arizona-thes Repository record for Theory of optical nonlinearities in semiconductors: Applications to nonlinear wavemixing and photonic switching. (opens in a new tab)

  19. Circulation enhancement of synthetic jet actuators via multiple orifices

    … found that for a given actuator with a specific input energy, it is possible to increase substantially the efficiency of the actuator, in terms of circulation produced, simply by increasing the number of orifices. From the results of the present study, decreasing the orifice diameter but …

    unsw Repository record for Circulation enhancement of synthetic jet actuators via multiple orifices (opens in a new tab)

Page 1 of 8