Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Inrush current"”.

  1. An inrush current model for core type transformers

    … approach has been developed for simulating inrush current for core type transformers. The model is capable of computing inrush current for various phase connection schemes under different initial conditions. A three phase thyristor controlled switch has been designed and constructed to be …

    manitoba Repository record for An inrush current model for core type transformers (opens in a new tab)

  2. PERFORMANCE OF DIGITAL DISTANCE RELAY ALGORITHMS FOR PROTECTING TRANSFORMER TERMINATED LINES

    … d.c. which is normally present in transient currents are among some of the characteristics of the algorithms that can be examined. Their performance can also be examined using fault data or data of transients like inrush currents which occur during switching-on of transformers. This thesis is …

    sask Repository record for PERFORMANCE OF DIGITAL DISTANCE RELAY ALGORITHMS FOR PROTECTING TRANSFORMER TERMINATED LINES (opens in a new tab)

  3. Comparison of control strategies for squirrel-cage induction generator-based wind energy conversion systems

    … responses, since they do not have internal current controllers. However, stator-flux slip control presents high inrush-current and a poor dynamic response and direct torque control presents high torque ripples and poor performance at low speeds. On the other hand, rotor-flux slip control, …

    brazil-ufrn Repository record for Comparison of control strategies for squirrel-cage induction generator-based wind energy conversion systems (opens in a new tab)

  4. Performance Optimization of the Differential Protection Schemes

    Current differential protection principle is superior in terms of sensitivity and speed of operation in comparison with other protection principle used in power systems. From the last five decades, various current differential protection schemes are widely used to protect busbars, transformers, and …

    uno Repository record for Performance Optimization of the Differential Protection Schemes (opens in a new tab)

  5. Motor starting with shunt capacitors: An alternate approach to voltage dip control

    … to cause undesirable voltage dip because of high inrush current during starting, especially when fed from weak AC systems. For this reason, large motors are often started with reduced voltage. This thesis proposes full-voltage motor starting with shunt capacitors. Two types of capacitors are used: …

    unlv Repository record for Motor starting with shunt capacitors: An alternate approach to voltage dip control (opens in a new tab) Download PDF for Motor starting with shunt capacitors: An alternate approach to voltage dip control (opens in a new tab)

  6. Realization of a High Power Microgrid Based on Voltage Source Converters

    … value changes by a factor of three from low current to peak current. The variable inductor approach gives many benefits with regard to high power microgrid applications. The design process of the inductor is described and simulation tools are used to verify the feasibility before final …

    arkansas Repository record for Realization of a High Power Microgrid Based on Voltage Source Converters (opens in a new tab)

  7. An ATP/EMTP model for the study of both normal and abnormal substation equipment operation

    … AT AUTHOR'S REQUEST.] In electric utility, overcurrent and overvoltage transients in switching operations often cause severe damage on the power system equipments. In this study, Alternative Transients Program -Electromagnetic Transients Program (ATP-EMTP) was employed for a general utility …

    missouri Repository record for An ATP/EMTP model for the study of both normal and abnormal substation equipment operation (opens in a new tab)

  8. Transformer modelling for transient studies

    … by the manufacturer. For ferroresonance and inrush current studies, core saturation needs to be represented reasonably well. A direct approach to producing nonlinear peak flux-current and voltage-current characteristic of the iron core, taking iron losses into account, is presented. The …

    ubc Repository record for Transformer modelling for transient studies (opens in a new tab) Download PDF for Transformer modelling for transient studies (opens in a new tab)

  9. Power Electronic-Based Solutions for Transient-Free Energization of Traction Power Transformers

    … is energized, a high-magnitude asymmetrical current, known as in- rush current, can flow into the energized winding while the other winding is open-circuited. This can lead to the malfunction of differential protective relays and generate axial and radial forces that deform transformer wind- …

    whiterose Download PDF for Power Electronic-Based Solutions for Transient-Free Energization of Traction Power Transformers (opens in a new tab)

  10. Circuit breaker transient recovery voltage analysis with shunt capacitor bank configurations

    … with appropriate ratings. Capacitor banks with inrush current limiting reactors are an integral part of the power system. Capacitor banks with inrush reactors on the load side terminal of the capacitor breaker alter the TRV seen across the breaker and it is critical to carry out the TRV analysis …

    texas Repository record for Circuit breaker transient recovery voltage analysis with shunt capacitor bank configurations (opens in a new tab)

  11. Condition Monitoring of Electrolytic Capacitors for Power Electronics Applications

    … capacitor faults on the capacitor voltage and current waveforms are investigated through experiments. It is also experimentally demonstrated that faults in the capacitor can be detected by monitoring the capacitor voltage and current. Various ESR estimation based detection techniques available …

    gatech Repository record for Condition Monitoring of Electrolytic Capacitors for Power Electronics Applications (opens in a new tab)

  12. An Analysis on the Circuit Breaking Phenomenon of High-Temperature Superconductor Circuit Breaker (HTSCB)

    … arc characteristics of HTSCB under the high current condition. The arc model can then be inserted in different network models and analyzed for numerous system loading with over current situations and for different HTS applications. The modelling is executed on a single-phase distribution …

    auckland-tech Repository record for An Analysis on the Circuit Breaking Phenomenon of High-Temperature Superconductor Circuit Breaker (HTSCB) (opens in a new tab)

  13. The prediction and control of transients in thyristor values

    … for minimum overall cost. Several methods of inrush control are proposed and studied. The preferred method, whose development is reported in this thesis, would utilize two magnetic materials, one of which is assumed to be lossless and the other has controlled eddy-current losses. Mathematical …

    aston Download PDF for The prediction and control of transients in thyristor values (opens in a new tab)

  14. The application of artificial neural networks to transformer protection

    … Neural Networks to identify the magnetizing inrush currents that may occur in transformers is developed in this thesis. It is based on the fact that the magnetizing inrush current has large harmonic components. A feed-forward neural network (FFNN) has been trained using the back-propagation …

    ubc Repository record for The application of artificial neural networks to transformer protection (opens in a new tab) Download PDF for The application of artificial neural networks to transformer protection (opens in a new tab)

  15. Distribution Network modelling and analysis of the application of HTS Transformer

    … modelling of load flow, system losses and over current phenomena to be experienced by the transformer. Even though HTS technology is claimed to offer better power system and other packaging benefits, the performance and reliability need to be proven and verified through the proper modelling of …

    auckland-tech Repository record for Distribution Network modelling and analysis of the application of HTS Transformer (opens in a new tab)

  16. Development of an algorithm for detection and classification of capacitor switching events

    … voltage gradient at the switching instant, inrush current, steady-state voltage rise, and reactive power support. Moreover, a library with common range of values for these parameters is used to improve the algorithm accuracy. For each identified capacitor switching event, the following …

    texas Repository record for Development of an algorithm for detection and classification of capacitor switching events (opens in a new tab)

  17. Multi-objective optimization and meta-modeling of tape-wound transformers

    … core loss, winding loss, voltage regulation, and inrush current given the core and winding geometries, material properties, input voltage, and rated load. The coupled MEC/T-equivalent and the TEC circuit-based performance evaluation is demonstrated within an optimization in which the goals are to …

    purdue-thes Repository record for Multi-objective optimization and meta-modeling of tape-wound transformers (opens in a new tab)

  18. Safe and Reliable Switching of Reactive Capacitor Banks in Sweden’s Industrial Sector

    … project aims to evaluate methods of limiting inrush current when connecting capacitor banks to a 12.1 kV grid in an industrial environment. Traditionally, Swedish industries have connected large capacitor banks in parallel to the load for reactive power compensation, using asynchronous …

    chalmers Repository record for Safe and Reliable Switching of Reactive Capacitor Banks in Sweden’s Industrial Sector (opens in a new tab)

  19. Reluctance network for analysing induction machines

    … reluctance network. As a result, the flux and current distributions are calculated for a cage induction motor. The rotor construction with a single-cage and double-cage winding is studied. From the analysis results, a single-phase equivalent circuit is defined to calculate the locked-rotor …

    aalto Repository record for Reluctance network for analysing induction machines (opens in a new tab)

  20. Control of surge currents in inverter fed loads

    … issues, especially with regards start up surge currents. This thesis investigates the characteristics of the input current drawn by consumer type AC loads, when driven by a standard sinusoidal 60 Hz 110VAC source, with particular emphasis on the inrush current transients found during start up. …

    ubc Repository record for Control of surge currents in inverter fed loads (opens in a new tab) Download PDF for Control of surge currents in inverter fed loads (opens in a new tab)

Page 1 of 3