Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Insulation Design"”.

  1. Insulation Design and Analysis for Medium-Voltage SiC-based Power Electronics Building Blocks

    In this dissertation, a design approach for medium voltage (MV) PCB-based components, such as the dc bus, is detailed. Key considerations, including electric field (E-field) grading near power terminals and PCB edges, cable feedthroughs, and the integration of components, are explored from the …

    vt Repository record for Insulation Design and Analysis for Medium-Voltage SiC-based Power Electronics Building Blocks (opens in a new tab)

  2. Insulation Design, Assessment and Monitoring Methods to Eliminate Partial Discharge in SiC-based Medium Voltage Converters

    … order to achieve the desired high power density, insulation system of the MV SiC-based converter must be compact. Therefore, challenges for the insulation system gradually appeared, as the insulation size becomes smaller and the Electric field (E-field) intensity significantly increases. Under …

    vt Repository record for Insulation Design, Assessment and Monitoring Methods to Eliminate Partial Discharge in SiC-based Medium Voltage Converters (opens in a new tab)

  3. Electric Field Grading and Electrical Insulation Design for High Voltage, High Power Density Wide Bandgap Power Modules

    … of "partial discharge (PD)" and, in turn, insulation degradation and, eventually, breakdown of the module. Unless the discussed high E issue is satisfactorily addressed and solved, realizing next-generation high power density WBG power modules that can properly operate will not be possible. …

    vt Repository record for Electric Field Grading and Electrical Insulation Design for High Voltage, High Power Density Wide Bandgap Power Modules (opens in a new tab)

  4. Improving Functionality and Sustainability of Commercial Insulation: Experimental Study, Heat Transfer Modeling, Environmental Assessment

    … and integrating high-performance sustainable design and green building best practices a Strategic Sustainability Performance Plan goal under the Executive Order 13514 (U.S DOE, 2009). As sustainability becomes a primary goal for engineers, a decision making framework is needed to guide their …

    usf Repository record for Improving Functionality and Sustainability of Commercial Insulation: Experimental Study, Heat Transfer Modeling, Environmental Assessment (opens in a new tab)

  5. Design of universal insulation systems for low voltage and high voltage rotating electrical apparatus

    … and generators, has historically required the design and specification of electrical insulation systems optimized based on operating voltage. This apparatus specific design approach, while effective, necessitates a variety of electrical insulation system topologies and material choices. It is …

    ttu Repository record for Design of universal insulation systems for low voltage and high voltage rotating electrical apparatus (opens in a new tab)

  6. Insulation-Constrained Design of Power Electronics Converters and DC Circuit Breakers

    … of such PD events gradually degrades the insulation system of the equipment, reducing its lifetime and ultimately leading to total insulation failure. Therefore, inception E-field based insulation design guidelines are developed to help achieve zero-PD operation of power electronics …

    vt Repository record for Insulation-Constrained Design of Power Electronics Converters and DC Circuit Breakers (opens in a new tab)

  7. Partial Discharge Testing and Detection under PWM Voltage

    … and measurement is an important part of electric insulation design. However, in PWM (pulse width modulation) voltage source converter environments, the noise resulting from switching voltage (rise and fall times of tens of nanoseconds) makes detection and extraction of partial discharge difficult. …

    ut-knoxville Repository record for Partial Discharge Testing and Detection under PWM Voltage (opens in a new tab)

  8. Ultra High Temperature Thermal Insulation Materials and the Significance of Opacification in the Suppression of Radiative Transport

    … applications. Although some current thermal insulation materials show a good performance, they either don’t withstand high temperatures or have a high thermal conductivity at high temperatures. The aim of the present thesis is to develop a pathway to improve the performance of high …

    york Repository record for Ultra High Temperature Thermal Insulation Materials and the Significance of Opacification in the Suppression of Radiative Transport (opens in a new tab)

  9. The application of response surface methodologies to microjoining of magnet wire without prior removal of insulation

    … of an alternative product and process design, microjoining. The use of microjoining with a folded over welding tab terminal design along with a parallel gap welding process provides a suitable method for joining a tin plated brass terminal to the 0.65mm magnet wire without prior removal …

    colostate Repository record for The application of response surface methodologies to microjoining of magnet wire without prior removal of insulation (opens in a new tab)

  10. Testing and Measurement in a High Voltage and High dv/dt Environment Demonstrated in a 10 kV SiC Based MMC Phase-Leg

    … challenges in measurement and testing due to the insulation design and high dv/dt associated with the device. This thesis focuses on the voltage and current sensing and testing of medium voltage converters. For the testing setup, the challenge is selecting an appropriate source and load, making …

    ut-knoxville Repository record for Testing and Measurement in a High Voltage and High dv/dt Environment Demonstrated in a 10 kV SiC Based MMC Phase-Leg (opens in a new tab)

  11. Design of a 405/430 kHz, 100 kW Transformer with Medium Voltage Insulation Sheets

    … transformer. The objective of this work is to design a >400 kHz, 100 kW transformer which will provide galvanic isolation in a Solid-State Transformer (SST) based PEBBs while maintaining high efficiency, high power density, and reduced size. This work aims to present a simplified design process …

    vt Repository record for Design of a 405/430 kHz, 100 kW Transformer with Medium Voltage Insulation Sheets (opens in a new tab)

  12. Analysis of Natural Convection Effects in Insulation Layers of Cryogenic Storage Tanks

    … Current efforts are directed at non-vacuum based insulation, similar to that used in liquified natural gas (LNG) storage. The non-vacuum insulation layer under large temperature difference can exhibit natural convection inside it, increasing the heat ingress. In this work, we study the natural …

    houston Repository record for Analysis of Natural Convection Effects in Insulation Layers of Cryogenic Storage Tanks (opens in a new tab)

  13. Effect of electrohydrodynamics on thermal dissipation for high voltage thermosyphons

    … coolant is important to the thermosyphon design. In recent years, there has been considerable interest in selecting low global warming potential coolants to replace Hydrofluorocarbons (HFCs) and Perfluorocarbons (PFCs). Thermal properties of Hydrofluoroethers (HFE) and Fluorinated ketone …

    soton Download PDF for Effect of electrohydrodynamics on thermal dissipation for high voltage thermosyphons (opens in a new tab)

  14. Performance standards for walk-in coolers and freezers in the United States as a function of local weather conditions

    … door closers, strip curtains, suction line insulation, optimized envelope insulation design, high efficiency lighting, hot gas defrost, evaporator fan controllers, etc. However, minimum efficiency standards for walk-in coolers and freezers have not yet been developed. Development of …

    umkc Repository record for Performance standards for walk-in coolers and freezers in the United States as a function of local weather conditions (opens in a new tab)

  15. Method for design and optimization of surface mount permanent magnet machines and induction machines

    … fuel needs and emissions. Electrical machine design is a comprehensive process based on several factors, including economic factors, material limitations, specifications and special application-dependent factors. At the same time, machine design is a multi-physics task comprising of electric …

    gatech Repository record for Method for design and optimization of surface mount permanent magnet machines and induction machines (opens in a new tab)

  16. Failure Modes Analysis and Protection Design of a 7-level 22 kV DC 13.8 kV AC 1.1 MW Flying Capacitor Converter Based on 10 kV SiC MOSFET

    … SiC MOSFET with 2.5 kHz switching frequency was designed and constructed. Given the complexity of a multilevel topology, the high voltage levels, and the critical nature of the loads, a failure in a high-power converter can incur significant costs, long service downtime, and safety risks to …

    vt Repository record for Failure Modes Analysis and Protection Design of a 7-level 22 kV DC 13.8 kV AC 1.1 MW Flying Capacitor Converter Based on 10 kV SiC MOSFET (opens in a new tab)

  17. Investigation of Compact Auxiliary Components for Medium-Voltage Converters with Enhanced Insulation and Wide-Bandgap Device Utilization

    … hardware that must simultaneously satisfy high insulation voltage, low common-mode (CM) coupling capacitance, and stable operation under fast voltage transients driven by wide-bandgap (WBG) switching devices. This dissertation addresses these competing requirements through three interconnected …

    vt Repository record for Investigation of Compact Auxiliary Components for Medium-Voltage Converters with Enhanced Insulation and Wide-Bandgap Device Utilization (opens in a new tab)

  18. Advanced Electrochemical Methods Enabled Hybrid Water Treatment and Desalination

    … of the electrochemical reactor, whose structural design was optimized by numerical simulation to balance heat transfer and mass transport. Degradation of three model organic pollutants, bisphenol A, phenol (VOC), and humic acid (natural organic matter) was evaluated, and the degradation rate …

    tamu Repository record for Advanced Electrochemical Methods Enabled Hybrid Water Treatment and Desalination (opens in a new tab)

Page 1 of 2