Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 109 for “"Intact Rock"”.
-
Innovative Methods in Intact Rock Deformation Detection
"An accurate assessment of intact rock deformation is imperative in engineering activities carried out either in or above rock masses. However, instruments used for post-peak deformation are easily debonded and cannot record the whole process of post-peak deformation required in the failure …
-
Thermo-mechanical loading of intact rock and discontinuities
… of an anthropogenic heat source in a rock mass. In this study the thermo-mechanical behaviour of intact rock and discontinuities is investigated through both laboratory experiments and their numerical simulations. A new method was devised for creating synthetic discontinuous specimens …
-
Application of Index Test Methods for Intact Rock Strength Assessment
Uniaxial compression strength of intact rock is important for engineering geology and geotechnics, because it is an important design parameter for mines, tunnels, slopes, and rock foundations. It is also used as input parameter in most the rock mass classification systems. The difficulties …
-
Investigation into the mechanical behaviour of intact rock at different sizes
The design of structures on or within a rock mass requires an estimate of the strength of the intact rock blocks within the mass. These blocks of rock can be many orders of magnitude greater in size than laboratory samples typically tested. The properties obtained from these samples must therefore …
-
Influence of Pore Water Pressure on the Engineering Properties of Intact Rock
Made available in DSpace on 2014-12-10T22:22:11Z (GMT). No. of bitstreams: 1 7500249.pdf: 8035732 bytes, checksum: 1bd7ff304a177792c508cd8d3bf25542 (MD5) Previous issue date: 1974
-
Membrane properties of intact rock cores of Burlington Limestone, Jefferson Dolomite, Darrington Phyllite, and low permeability concrete
… with other naturally occurring 'tight' rock types. Therefore, the objectives of this research was to perform a series of hyperfiltration experiments using actual rock discs of Quarry Ridge Jefferson Dolomite, Darrington Phyllite, Lower Burlington Limestone, and low permeability concrete …
-
Reliability-based design (RBD) of shallow foundations on rock masses
… the design of shallow foundations on jointed rock masses resulting in a consistent process to design foundations with a known reliability (probability of failure) and optimum cost. The strength of jointed rock masses is a function of the intact rock strength and the rock mass classification …
-
Development of a New 3-D Coal Mass Strength Criterion
… Firstly, the geomechanical properties for the intact coal and coal discontinuities were estimated through the laboratory geomechanical property tests. Secondly, naturally existing fracture networks in the cubic coal blocks were first detected by the industrial Computed Tomography (CT) scanning …
-
Development of a Failure Criterion for Rock Masses Having Non-Orthogonal Fracture Systems
Two new three-dimensional rock mass strength criteria are developed in this dissertation by extending an existing rock mass strength criterion. These criteria incorporate the effects of the intermediate principal stress, minimum principal stress and the anisotropy resulting from these stresses …
-
Γεωτεχνική διερεύνηση μολασσικών σχηματισμών της λεκάνης των Γρεβενών
… construction of technical works. In the case of rock formations, this behavior depends on both the mechanical characteristics of the intact rock material and the orientation and the geometric and mechanical characteristics of the discontinuities. The shear resistance of intact rock materials is …
-
Analysis of rockmass mechanical behavior using rockmass analog numerical models and laboratory specimens
… and predict the mechanical behavior of rock has important applications for the design of civil and mining engineering structures, as well as applications for industries like geothermal, oil and gas, etc. Rock can be characterized mechanically by attributes such as strength, stiffness, …
-
Estimation of confined peak strength for highly interlocked jointed rockmasses
The determination of rockmass strength for mining has become critically important in recent years due to the increase in the number of projects at depths exceeding 1500 m. The commonly used empirical approaches for the estimation of rockmass strength are primarily based on experiences at shallow …
-
Three-Dimensional FEM Modeling of Geothermal Reservoir Stimulation Using Stochastic Fracture Networks and Continuum Damage Mechanics
… pressure and temperature fields of reservoir rock. Coupled thermo-hydro-mechanical (THM) processes are involved in those changes. In this work, three-dimensional finite element methods (FEM) are developed and applied to simulate the response of unconventional reservoirs to fluid injection. The …
-
Experimental and Numerical Investigations of the Behaviour of Intact Veined Andesite
Veined rock masses host some of the worldâ s largest mineral deposits. The fundamental behaviour of veined rock mass under load has not been fully understood. Currently there is an absence of validated engineering tools to undertake a comprehensive analysis of the behaviour of veined rock. The main …
-
The shear strength of rock masses
… the strength of the foundations of dams on rock masses was limited. This section applies to all applications of rock mass strength such as the stability of rock slopes. Methods used for assessing the shear strength of jointed rock masses are based on empirical criteria. As a general rule …
-
Ultrasonic and image-based characterization of progressive damage processes in intact rocks
Stress-driven deformation behavior of rocks is relevant in many practical scenarios, such as damage development around underground structures, the failure of mine pillars, stability of rock slopes and rock-based bridge or dam abutments, hydraulic fracturing operations, rock burst dynamics, …
-
Γεωλογικοί παράγοντες που επηρεάζουν τις γεωτεχνικές ιδιότητες του βράχου - η επίδραση της ανισοτροπίας
… pronounced effect of the fabric of anisotropic rocks on the strength and deformation characteristics of intact rocks. The factors that influence the strength and deformation of the intact rock are the mineral composition, the fabric (anisotropy) and the degree of weathering. Anisotropy is a …
-
Συσχέτιση παραμέτρων διατμητικής συμπεριφοράς ασυνεχειών και άρρηκτου πετρώματος
Τhe mechanical behavior of a rockmass depends on both the mechanical characteristics of the intact material and the mechanical characteristics of the discontinuities. The understanding of the mechanical behavior of the intact rock under various stress conditions as well as the verification of the …
-
Microcosm Evaluation of Natural and Biologically-enhanced Abiotic Transformation of Chlorinated Ethenes in Low Permeability Formations
… formations, for example fractured bedrock aquifers. TCE back-diffusion from low permeability zones and management of persistent TCE groundwater plumes caused by this long-term source zone pose major challenges for remediation. Monitored natural attenuation (MNA) is a cost-effective …
-
The Effect of Natural Fractures on the Mechanical Behavior of Limestone Pillars: A Synthetic Rock Mass Approach Application
… limestone mines have inherently strong rock and experience good ground stability. Also, modern pillar design guidelines developed by National Institute for Occupational Safety and Health (NIOSH) have improved the design of stable layouts for modern limestone mines. However, ground …
Page 1 of 6