Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Integrated circuits--Reliability"”.

  1. 3-D modelling of IC interconnect using OpenAccess and Art of Illusion

    In search of higher speed and integration, the integrated circuit (IC) technology is scaling down. The total on-chip interconnect length is increasing exponentially. In fact, interconnect takes up the most part of the total chip area. The parasitics associated with these interconnect have …

    portland-state Repository record for 3-D modelling of IC interconnect using OpenAccess and Art of Illusion (opens in a new tab)

  2. Effect of moisture on microcircuit failure

    <p>Stability and reliability of microcircuit is dependent on its design, fabrication, testing, storage and use.</p><p>In this thesis emphasis is given on various failure mechanisms of Integrated Circuits in humid environment and techniques of improving reliability. Other factors which affect the …

    njit Repository record for Effect of moisture on microcircuit failure (opens in a new tab)

  3. Reliability studies on microcircuit

    <p>The primary objective of this thesis is to determine and analyze the failure mechanisms of Low Power Schottky microcircuit device (2-Input NAND Gate). Pinpoint the causes, and suggest the precautionary measures that prevent the occurrence of these failures. To achieve this goal, the study went …

    njit Repository record for Reliability studies on microcircuit (opens in a new tab)

  4. Effect of humidity and moderate temperature on microcircuit failure

    … has brought forth many questions concerning the reliability of these devices.</p><p>This research discuss the TTL integrated circuit failure rates, and provides information on the effects of temperature, device complexity and packaging on TTL failure rates under storage condition of 100% R.H. …

    njit Repository record for Effect of humidity and moderate temperature on microcircuit failure (opens in a new tab)

  5. Reliability problems and failure mechanisms in IC packaging

    <p>Today, reliability is acknowledged as an important item in design and operation of electronics circuits and system.</p><p>This thesis provides information on evaluation of the reliability for hermetic and non hermetic IC packages made by different manufacturers.</p><p>Literature study …

    njit Repository record for Reliability problems and failure mechanisms in IC packaging (opens in a new tab)

  6. Parametric testing, characterization and reliability of integrated circuits

    … deals with the problem of parametric failures in Integrated Circuits (ICs), focussing specifically on timing, which is one of the most important parameters in modern ICs. Two approaches to tackling timing violations are explored, the first being efficient timing characterization, involving delay …

    texas Repository record for Parametric testing, characterization and reliability of integrated circuits (opens in a new tab)

  7. Improved Predictive Modeling Techniques for Non-Linear Solder Material Behavior

    … To gain visibility on IC device performance and reliability, thermo-mechanical simulation is performed based on a unified, viscoplastic material model, which is dependent on nine parameters. In this study, an improved method of Anand parameter extraction, which involves curve-fitting non-linear …

    portland-state Repository record for Improved Predictive Modeling Techniques for Non-Linear Solder Material Behavior (opens in a new tab)

  8. Stress tests of analog CMOS ICs for gate-oxide reliability enhancement

    Thesis (Ph. D.)--Michigan State University. Department of Electrical and Computer Engineering, 2001

    msu Repository record for Stress tests of analog CMOS ICs for gate-oxide reliability enhancement (opens in a new tab)

  9. Temperature dependent reliability of plastic packaged microcircuits

    … lead to potentially faster degradation of device reliability. Thermal management at device level packaging involves efficient and cost-effective removal of dissipated thermal energy from the device to assure its reliable performance over the long term. In the context of very high levels of …

    njit Repository record for Temperature dependent reliability of plastic packaged microcircuits (opens in a new tab)

  10. Analysis and design of reliable mixed-signal CMOS circuits

    Facing the constantly increasing reliability challenges under technology scaling, the topics in IC reliability technique have been receiving serious attention during recent years. In this work, based on the understanding of existing physical failure models that have been concentrating on the …

    gatech Repository record for Analysis and design of reliable mixed-signal CMOS circuits (opens in a new tab)

  11. Investigation of Via Extrusion and The Effect of Cap Layer for 3D Integrated Circuits

    … element in three-dimensional integration circuits (3D ICs), which offers substantial improvements in integration density, form factor, device performance, and power efficiency. However, Cu-filled TSVs are exposed to multiple thermal cycles during fabrication, test and operation, which lead …

    ucf Repository record for Investigation of Via Extrusion and The Effect of Cap Layer for 3D Integrated Circuits (opens in a new tab)

  12. The Reliability of Through Glass Vias and Solder Joints for Three Dimensional Multi Functional Integrated Systems

    … to the package performance and causes serious reliability problems for the integrity of signal layers. On the other hand, the Controlled Collapse Chip Connections (C4-bumps) and micro-bump solder joints, which are important for chip-to-substrate and chip-to-chip connections, can experience …

    ucf Repository record for The Reliability of Through Glass Vias and Solder Joints for Three Dimensional Multi Functional Integrated Systems (opens in a new tab)

  13. Provably Trustworthy and Secure Hardware Design with Low Overhead

    … usage of ASLD to produce secure and resilient circuits that withstand IC attacks (during the fabrication) and PA attacks (after fabrication). First, we show that ASLD has unique features that can be used to prevent PA and IC attacks. In our three topics, we evaluate each design based on …

    ucf Repository record for Provably Trustworthy and Secure Hardware Design with Low Overhead (opens in a new tab)

  14. Robust Acceleration of Data-Centric Applications using Resistive Computing Systems

    … access memory (STT-MRAM). Resistive devices integrated into crossbar arrays simultaneously supports both dense storage and energy-efficient analog computation, which is highly desirable for processing of big data using both low-power mobile devices and high-performance computing (HPC) …

    ucf Repository record for Robust Acceleration of Data-Centric Applications using Resistive Computing Systems (opens in a new tab)

  15. Reduced Footprint Probabilistic Inference Networks Using Novel Hybrid SHE-MTJ/CMOS Based Majority Gate

    In recent years, innovations in machine learning using artificial neural networks (ANN) have significantly increased and led to various applications like image recognition, text classification, machine translation, sequence recognition, etc. Earlier, research was focused on software-based DBNs, …

    ucf Repository record for Reduced Footprint Probabilistic Inference Networks Using Novel Hybrid SHE-MTJ/CMOS Based Majority Gate (opens in a new tab)

  16. Reliability Study Of Ingap/gaas Heterojunction Bipolar Transistor Mmic Technology By Characterization, Modeling And Simulation

    … have shown real advances of microwave monolithic integrated circuits (MMICs) for millimeter-wave frequency systems, such as wireless communication, advanced imaging, remote sensing and automotive radar systems, as MMICs can provide the size, weight and performance required for these systems. …

    ucf Repository record for Reliability Study Of Ingap/gaas Heterojunction Bipolar Transistor Mmic Technology By Characterization, Modeling And Simulation (opens in a new tab)

Page 1 of 2