Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Integrated inductors"”.

  1. High-Q Integrated Inductors on Trenched Silicon Islands

    … of high quality factor (Q) copper (Cu) inductors on CMOS-grade (10-20ohm.cm) silicon (Si) substrates using a fully CMOS-compatible process. A low-temperature (less than300C) fabrication sequence is employed to reduce the loss of Si wafers at RF frequencies by trenching the Si substrate. …

    gatech Repository record for High-Q Integrated Inductors on Trenched Silicon Islands (opens in a new tab)

  2. Slow Wave Transmission Lines Used as Integrated Inductors with Improved Performance

    … frequency (fsrf) and area efficiency. Integrated in low-cost silicon substrate, on-chip inductors are facing crucial challenges, like design flexibility, area efficiency, conductive and substrate losses. Early studies have identified many techniques to overcome these challenges, such as …

    carleton Repository record for Slow Wave Transmission Lines Used as Integrated Inductors with Improved Performance (opens in a new tab)

  3. Wireless power transfer using integrated and emerging technologies

    … coil area while maximizing efficiency in integrated, regulated systems. Presented contributions include the efficiency analysis, design procedure, and integration challenges for high efficiency RF near field coupling systems. Along the way, the use of a reverse power distribution network …

    gatech Repository record for Wireless power transfer using integrated and emerging technologies (opens in a new tab)

  4. Fully integrated cmos phase shifter/vco for mimo/ism application

    A fully integrated CMOS 0 – 900 phase shifter in 0.18um TSMC technology is presented. With the increasing use of wireless systems in GHz range, there is high demand for integrated phase shifters in phased arrays and MIMO on chip systems. Integrated phase shifters have quite a high number of …

    tamu Repository record for Fully integrated cmos phase shifter/vco for mimo/ism application (opens in a new tab)

  5. Design of Radio-Frequency Filters and Oscillators in Deep-Submicron CMOS Technology

    … systems, and they are mostly built on passive integrated inductors, which occupy a relative large silicon area. This research attempted to implement filters and oscillators operating at 1-5 GHz using transistors only, to reduce the circuits’ area. The filters and oscillators are designed using …

    portland-state Repository record for Design of Radio-Frequency Filters and Oscillators in Deep-Submicron CMOS Technology (opens in a new tab)

  6. Design of Wireless Power Transfer and Data Telemetry System for Biomedical Applications

    … sensors. For good inductive coupling, the inductors should have high inductance and high quality factor. But the physical dimensions of the implanted inductors cannot be large due to a number of biomedical constraints. Therefore, there is a need for small sized and high inductance, high …

    utk-theses Repository record for Design of Wireless Power Transfer and Data Telemetry System for Biomedical Applications (opens in a new tab)

  7. A Fully Monolithic 2.5 GHz LC Voltage Controlled Oscillator in 0.35 μm CMOS Technology

    … have been hampered by the lack of high-quality integrated inductors. This thesis focuses on the design of a fully integrated 2.5 GHz LC CMOS VCO. The circuit is intended as a vehicle for future mixed RF/digital noise characterization. The circuit was implemented in a 0.35 μm single poly, 4 …

    vt Repository record for A Fully Monolithic 2.5 GHz LC Voltage Controlled Oscillator in 0.35 μm CMOS Technology (opens in a new tab)

  8. Tunable Impedance Matching Network Fundamental Limits and Pracitical Considerations

    … an accurate model of metal loss in planar integrated inductors for low-loss substrates is developed and demonstrated. ^ Finally, immediate future research directions are suggested: i) expanding the topologies, tuning elements, and loads analyzed; ii) performing a deep study into parasitics; …

    purdue-thes Repository record for Tunable Impedance Matching Network Fundamental Limits and Pracitical Considerations (opens in a new tab)

  9. Low power digitally controlled oscillator for IoT applications

    … used to solve the low-quality factor issue of integrated inductors. Two digitally controlled oscillators (DCO) have been implemented to show the advantages of utilizing a transformedbased resonator and the methodology based on the UICM model. These designs aim for the operation in low voltage …

    brazil-ufrgs Repository record for Low power digitally controlled oscillator for IoT applications (opens in a new tab)

  10. Electric Vehicle (EV) Wireless Chargers: Design And Optimization

    … charging system, and save ferrite material, integrated inductors into the magnetic couplers are proposed. In this structure, the DC-DC inductor is integrated into the receiver main coil and the resonant inductor is integrated into the transmitter coil. This integration introduces new …

    mcmaster Repository record for Electric Vehicle (EV) Wireless Chargers: Design And Optimization (opens in a new tab)

  11. Fully-Integrated Boost and Buck Converters with High Efficiency and Optimized Inductor Geometry

    … modelling, design, and implementation of fully-integrated dc-dc converters. Since simple and accurate integrated inductor models for dc-dc converters are not currently available, the main objective of this thesis is to develop new models and compare the analysis, simulation, and measurement …

    guelph Repository record for Fully-Integrated Boost and Buck Converters with High Efficiency and Optimized Inductor Geometry (opens in a new tab)

  12. Circuit Techniques For Efficient Integrated Power Management In Standard CMOS

    DC-DC voltage conversion is the heart of integrated power management. It involves conversion of a voltage level from a source (usually higher) to a different voltage level required by a load (usually lower than the source). During this process, we desire that the output power should be as close as …

    umn Repository record for Circuit Techniques For Efficient Integrated Power Management In Standard CMOS (opens in a new tab)