Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"Inter-Story"”.
-
Analysis and Design of a Building with Inter-Story Seismic Isolation
… placing the seismic isolation system at an intermediate height along the structure, known as inter-story seismic isolation. A case study where a building with inter-story seismic isolation is modeled and analyzed using a Nonlinear Time History Analysis (NTHA). A preliminary design, initial …
-
THE PERFORMANCE OF INTER-STORY ISOLATED STRUCTURES SUBJECT TO WIND AND EARTHQUAKE HAZARDS
The implementation of inter-story isolation has gained popularity over the past decade. The focus of this thesis is to study the performance of an inter-story isolated building under earthquake ground motion as well as high wind forces through the time-history analysis of a multi-degree-of-freedom …
-
Performance based seismic design of cross laminated timber tall buildings with inter-story isolation system
… damage in strong earthquakes is to implement inter-story isolation system in multi-story CLT buildings. Application of such a system leads to elongated building natural period, shifted lateral displacement demands, and increased amount of damping. This concept has been used in both steel and …
-
Simulation-Based Evaluation and Optimization of the Seismic Performance of Buildings with Passive Energy Dissipation System
… and evaluate the influence of soil-structure interaction in the performance-based seismic design of structures. Aiming at these objectives, this dissertation consists of three related studies. In the first study, the seismic performance of structures with energy dissipation systems, …
-
The role of the floor system in the seismic response of steel gravity framing
… of composite clip angle connections to cyclic inter-story drift was experimentally investigated in this test program. Testing was performed on a cruciform sub-assembly with W21x55 girders framing in to a W12x96 column with varied clip angle details. A composite slab was cast atop the girders …
-
Design of self-centering rocking steel braced frames : an engineering demand trade-off approach considering enhanced performance
… response and engineering demands, such as inter-story drift ratio and floor acceleration, together with the goal of producing designs that reduce the total damage in the building system, including structural and nonstructural damage. This dissertation presents the modeling, design, and …
-
Seismic Performance of concrete buildings reinforced with superelastic shape memory alloy rebars
… frames of three different heights (3, 6, and 8-storys) were used in this study where SMA is gradually introduced from level 1 to the top most floor. The frames were designed according to the recent code of (CSA A23.3-04 2004) and assumed to be located in the high seismic zone of Western Canada. …
-
Performance-Based Economical Seismic Design of Multistory Reinforced Concrete Frame Buildings and Reliability Assessment
… to develop a new optimal PBSD method for multi-story RC moment frames. This method is capable of overcoming the deficiencies of existing optimal PBSD methods and can be implemented by the U.S. design practice. The proposed method minimizes construction cost and takes the limit of member plastic …
-
Optimal placement and design of passive damper connectors for adjacent structures
… of a limited number of dampers to minimize the inter-story drift. In this thesis, we present a bi-level optimization algorithm to find the optimal arrangement and mechanical properties of dampers placed between two adjacent buildings to minimize the maximum inter-story drift during (simulated) …
-
Application of SMA fiber composite as seismic reinforcement for concrete moment resisting frames
… of the frames in terms of reducing residual inter-story drifts and damage under earthquake loading, while still maintaining the elastic characteristics associated with FRP. SMA fibers, conventional polymeric fibers and resin are infused together to manufacture the new composite under high …
-
Nonlinear dynamic assessment of mid-rise light-frame wood shear walls under horizontal and vertical ground motions
… by comparing the dynamic performance of multi-story shear walls constructed with discrete and continuous rod hold-down systems. For this purpose, a numerical model has been developed and series of comprehensive nonlinear time-history analyses are conducted in SAP2000 software. Maximum …
-
Detecting and Quantifying Damage in Buildings Using Earthquake Response Data and Capacity Curves
… degradation and ductility ratios either at an inter-story or fundamental mode resolution. The method is calibrated by implementation on numerical simulations and experimental models and applied to the historical response data of the 7-story hotel in Van Nuys, CA and the Imperial County Services …
-
RATE-INDEPENDENT LINEAR DAMPING IN VIBRATION CONTROL ENGINEERING
… systems such as base-isolated structures, inter-story isolated buildings, and vehicle suspension systems. RILD is a promising damping model for low-frequency structures because it provides direct control over displacement. Because the control force generated by RILD is proportional to …
-
Risk Estimation of Nonlinear Time Domain Dynamic Analyses of Large Systems
… criteria for the overall lateral deflection and inter-story drift. The accuracy of the estimated risk is again verified using the Monte Carlo simulation technique. In all cases, the probabilities of collapse are found to be less than 10% when excited by the risk-targeted maximum considered …
-
Feasibility study of tall concrete-timber hybrid system
… where a concrete frame with slabs at every third story provides fire separation as well as stiffness and strength to resist gravity and lateral loads. The intermediate stories including their floors are constructed using light-frame wood modules. This approach reduces the environmental footprint …
-
Cyclic Testing of a Skewed Special Moment Frame RBS Connection Having a Composite Concrete Slab
… of the SMF system while accommodating the inter-story drift. Additionally, column panel-zone yielding and column flange yielding were observed. Local strain measurements within the RBS and beam-to-column connection regions suggest relatively similar demands across the RBS but with higher …
-
Structural Response of Balloon type Cross-Laminated Timber at Component and Building Levels
… that mass irregularities markedly influence inter-story drift, mainly when mass is incorporated at different levels, and that the location of mass addition is vital to the building's seismic response. The vertical geometric irregularity of the building impacts the seismic response uniquely in …
-
Expected Structural Damage, Residual Capacity, and Repairability of Light-Frame Timber Houses
… structures is commonly evaluated using peak inter-story drift. However, drift alone does not fully represent the remaining structural capacity of a building or its ability to be repaired following a seismic event. Although expected structural damage, residual capacity, and repairability have …
-
Assessment of the effect of non-structural walls on the dynamic properties and engineering demand parameters of a case study building
When an earthquake occurs, most international design approaches ignore the contribution of non-structural components (NSCs) to the building dynamic properties. This thesis evaluates the effects of the architectural components, namely curtain walls, and masonry walls, on the mode shapes, fundamental …
-
Seismic vulnerability of older reinforced concrete frame structures in Mid-America
… After designing a representative three-story gravity load designed reinforced concrete frame structure, a nonlinear analytical representation was used evaluate inter-story drift demands from simulated earthquake time histories that were representative for the region. Limit state story …
Page 1 of 4