Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"InterMetallic compounds (IMCs)"”.

  1. Dissimilar Joining of Al (AA2139) – Mg (WE43) Alloys Using Friction Stir Welding

    … metal alloys is the formation of brittle intermetallic compounds (IMCs) in the stir zone affecting mechanical properties of joint significantly. In this present study, FSW joining process is used to join aluminum alloy AA2139 and magnesium alloy WE43. The 9.5 mm thick plates of AA2139 and …

    unt Repository record for Dissimilar Joining of Al (AA2139) – Mg (WE43) Alloys Using Friction Stir Welding (opens in a new tab)

  2. Fundamental Design of Non-noble Intermetallic Compound Surface Chemistry in Thermal Driven and Microwave Driven Reactions

    … rational design and mechanistic understanding of intermetallic compounds (IMCs) and their application in selective hydrogenation and non-equilibrium, microwave-driven methane pyrolysis for CO2-free hydrogen production. The first part of this work establishes IMCs as a tunable platform for …

    utk-theses Repository record for Fundamental Design of Non-noble Intermetallic Compound Surface Chemistry in Thermal Driven and Microwave Driven Reactions (opens in a new tab)

  3. Two-dimensional early transition metal carbides as supports for platinum catalysts

    … (DFT), we confirmed the formation of intermetallic compounds (IMCs) nanoparticles in Pt/MXenes catalysts after reducing a Pt precursor with MXene supports at elevated temperatures. Moreover, we proposed that Pt undergoes a three-stage transformation from single atoms to IMCs on the …

    iastate Repository record for Two-dimensional early transition metal carbides as supports for platinum catalysts (opens in a new tab)

  4. An Investigation of Reliability of High Density Electronic Package-to-Board Interconnections from the Perspective of Solder Joint Metallurgy

    … joints. Dispersion strengthening effect of the intermetallic compounds (IMCs), coarsening of the IMC particles, strain rate hardening, solder fatigue, and recrystallization of Sn grains in the highly stressed areas were observed. These were found to directly impact Pb-free solder joint …

    aalto Repository record for An Investigation of Reliability of High Density Electronic Package-to-Board Interconnections from the Perspective of Solder Joint Metallurgy (opens in a new tab)

  5. Microstructural characterization of a 4043 Al alloy produced by molten metal deposition (MMD)

    … of primary α-Al grains and Fe-rich intermetallic compounds (IMCs). Interlayer junction width was sensitive to build height and processing conditions, reflecting the roles of wetting, spreading and prior-layer remelting. In contrast, grain structure and IMC characteristics remained …

    oxford Repository record for Microstructural characterization of a 4043 Al alloy produced by molten metal deposition (MMD) (opens in a new tab)

  6. Lead free solders for aerospace applications

    … temperatures up to 175°C for the first time. Intermetallic compounds (IMCs) were stiff, hard and brittle with very low creep rates, while the softer primary Sn, eutectic regions and Cu metallization readily underwent creep. Two-dimensional finite element analysis (FEA) of nanoindentation was …

    oxford Restricted access

  7. ASSESSMENT OF PROPERTIES OF TRANSIENT LIQUID PHASE SINTERED (TLPS) INTERCONNECTS BY SIMULATION AND EXPERIMENTS

    … is transformed into high melting temperature intermetallic compounds (IMCs). In this work, three TLPS sinter paste systems based on the copper-tin (Cu-Sn), nickel-tin (Ni-Sn), and copper-nickel-tin (Cu-Ni-Sn) material systems are designed. A novel process for their application as electronic …

    maryland Repository record for ASSESSMENT OF PROPERTIES OF TRANSIENT LIQUID PHASE SINTERED (TLPS) INTERCONNECTS BY SIMULATION AND EXPERIMENTS (opens in a new tab)

  8. Rational Design of Non-noble Metal Intermetallic Compounds with Tunable Surface and Catalytic Chemistry via Combined Computational and Experimental Method

    … towards C, H, and O of non-noble metal intermetallic compounds (IMCs) catalysts in olefin production and hydrocarbons reforming reactions. In these reactions, different degrees of surface reactivity towards C, H, and O are required to achieve high activity and selectivity as well as …

    utk-theses Repository record for Rational Design of Non-noble Metal Intermetallic Compounds with Tunable Surface and Catalytic Chemistry via Combined Computational and Experimental Method (opens in a new tab)

  9. 4D quantifications of intermetallics in solidifying aluminium alloys

    … the growth dynamics and mechanisms of faceted intermetallic compounds (IMCs) in aluminium alloys under different solidification conditions (temperature gradients, cooling rates and external magnetic field). Different IMCs in four aluminium alloys are studied including Al13Fe4 in Al-5wt%Fe …

    birmingham Download PDF for 4D quantifications of intermetallics in solidifying aluminium alloys (opens in a new tab)

  10. MESOSCALE MICROSTRUCTURE EVOLUTION, RELIABILITY AND FAILURE ANALYSIS OF HIGH TEMPERATURE TRANSIENT LIQUID PHASE SINTERING JOINTS

    … liquid phase to form high temperature stable intermetallic compounds (IMCs). The performance and durability of these materials strongly depend on their microstructure, which is determined by their processing. The complicated process of IMC formation through eutectic solidification and the …

    maryland Repository record for MESOSCALE MICROSTRUCTURE EVOLUTION, RELIABILITY AND FAILURE ANALYSIS OF HIGH TEMPERATURE TRANSIENT LIQUID PHASE SINTERING JOINTS (opens in a new tab)

  11. Effect of Au Content on Microstructural Evolution of SnAgCu Solder Joints That Undergo Isothermal Aging and Reliability Testing

    … composition of the solder joints and any intermetallic compounds (IMCs) that formed. The growth of bulk and interfacial layer IMCs in each package/board system was studied. In thick gold boards, AuSn4 particles observed in the bulk solder grew larger over time, absorbed Ni, and migrated to …

    calpoly Repository record for Effect of Au Content on Microstructural Evolution of SnAgCu Solder Joints That Undergo Isothermal Aging and Reliability Testing (opens in a new tab)

  12. Assessing Au-Al Wire Bond Reliability Using Integrated Stress Sensors

    … stresses occurring on the bond pad due to intermetallic formation, oxidation, and crack formation at the bond interface. Two sets of identical test chips are bonded with optimized Au ball bonds and aged for 2000 h at 175 ºC. One set is connected to equipment which monitors signals from the …

    waterloo Repository record for Assessing Au-Al Wire Bond Reliability Using Integrated Stress Sensors (opens in a new tab)

  13. Friction Stir Welding (FSW) of dissimilar metals and alloys

    … process and facilitating the prediction of IMCs formation.The study begins with a literature review emphasising the importance of placing copperon the advancing side (AS) to achieve defect-free dissimilar aluminium to copper FSWjoints. However, tool offsetting on the retreating side (RS) or …

    strathclyde Repository record for Friction Stir Welding (FSW) of dissimilar metals and alloys (opens in a new tab)

  14. Microstructure control and property enhancement of NiTi-stainless steel dissimilar joints

    … challenging due to the formation of brittle intermetallic compounds (IMCs) in the fusion zone (FZ) or the interface. Two strategies can be summarized to address this issue: (1) restricting the mixing of molten metals and (2) replacing the most harmful Laves (Fe,Cr)2Ti with ductile phases. The …

    waterloo Repository record for Microstructure control and property enhancement of NiTi-stainless steel dissimilar joints (opens in a new tab)

  15. A novel approach for property modification of cast aluminum alloys with nanostructured chemical additions

    … with TSP addition, suggesting TSP changes the Cu intermetallic compounds (IMCs) to favor the formation of theta, which demonstrated its potential as a strengthening precipitate. This study addresses fundamental questions on how the addition of TSP influences microstructure and solidification …

    msu

  16. Cold Spray Assisted Mg/Al Dissimilar Resistance Spot Welds

    … joined together due to the formation of brittle intermetallic compounds (IMCs) during traditional welding processes. Resistance spot welding (RSW), a common method in automotive manufacturing, is particularly limited when directly joining Al and Mg because of these IMC-related issues. This study …

    waterloo Repository record for Cold Spray Assisted Mg/Al Dissimilar Resistance Spot Welds (opens in a new tab)

  17. GRAIN-SCALE ANISOTROPIC STUDY OF TENSILE VS. SHEAR MECHANICAL CONSTITUTIVE AND FATIGUE BEHAVIOR IN OLIGOCRYSTALLINE SAC305 SOLDER JOINTS

    … (such as grain orientation, grain boundaries, intermetallic compounds [IMCs] and substrates) that are believed to play important roles in the fatigue of functional solder joints under life-cycle loading. Therefore, Part I of this study uses a combination of experiments and finite element …

    maryland Repository record for GRAIN-SCALE ANISOTROPIC STUDY OF TENSILE VS. SHEAR MECHANICAL CONSTITUTIVE AND FATIGUE BEHAVIOR IN OLIGOCRYSTALLINE SAC305 SOLDER JOINTS (opens in a new tab)

  18. Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials

    … carried out and the growth behaviours of the intermetallic compounds (IMCs) during wetting, solidification and isothermal ageing have been investigated. It has been found that the addition of Bi into the Sn-Ag-Cu solder reduces the consumptions of the substrates and suppresses the growth of …

    greenwich Download PDF for Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials (opens in a new tab)

  19. Novel Methods in Ball Bond Reliability Using In-Situ Sensing and On-Chip Microheaters

    … of novel wire bond materials which do not form Intermetallic compounds (IMCs) as rapidly as Au wire on Al substrates. In this thesis, five new chip designs for use in wire bond reliability testing are reported, focusing on the first joint made in a wire bond, called the ball bond. These chips …

    waterloo Repository record for Novel Methods in Ball Bond Reliability Using In-Situ Sensing and On-Chip Microheaters (opens in a new tab)

Page 1 of 2