Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Interaction curves"”.
-
Determination of interaction curves for the stability of a three degree of freedom, shallow arch model under multiple dynamic loads
… this study is to determine stability boundaries (interaction curves) for a three degree of freedom, shallow arch model under multiple dynamic loads. The model consists of four rigid bars connected by frictionless pins, with rotational springs and dashpots at the three interior joints, and a …
-
A Numerical Solution for the Ultimate Strength of Tubular Beam-Columns
To provide a basis for the development of interaction curves for tubular beam-columns of annular cross section, a general purpose beam-column computer program is developed, and used to determine ultimate load capacities. The paper presents the analytical model and the computer method. The …
-
Columns under combined bending and thrust
… is developed for construction of deflection curves of beam-columns stressed into plastic range by thrusts and equal end moments producing single curvature bending. Actual deflection curves are plotted for 8x8 WF 31 lb/ft section acted upon by moments and thrusts of different magnitudes. These …
-
Development of a new design method for the cross-section capacity of steel hollow sections
… too complex and inconsistent. The Overall Interaction Concept (OIC) stands as a new design approach that aims at a straightforward design check of the stability and resistance of steel cross-sections. Based on the use of a generalized relative slenderness and so-called interaction curves, …
-
Biaxial bending of L-shape reinforced concrete column sections.
A computer program was developed to determine the interaction curves and the isoload contours for L-Sections reinforced concrete columns. The program used the generally accepted assumption of plane sections remaining plane, but the maximum limiting concrete strain was a variable parameter. The …
-
Thermo-Elasto-Plastic Behavior of Biaxially Loaded Steel Beam-Columns Inducing Those From World Trade Center Towers
… stiffness degradation and load-moment interaction curves are generated for typical WTC beam-columns which existed in the impacted area during 9/11 attacks.
-
Stability of a shallow planar truss model under multiple loads
… Displacement constraint boundaries (i.e., interaction curves or surfaces for maximum allowable deflections) are also presented for the shallow truss model. Displacement constraint boundaries could be a very useful design aid where deflections are likely to control the design of a structure.
-
Stability of a reticulated dome under multiple independent loads
… is to investigate stability boundaries, or load interaction curves, of a reticulated dome. An elastic, geometrically nonlinear model with 21 degrees of freedom is considered. The nonlinear response of the model to imposed loads is determined using two separate computer programs as a check on each …
-
Study on structural integrity of welded components using the LMM
… of cyclic plasticity and creep-cyclic plasticity interaction of welded components, and the consequential damage assessment using the Linear Matching Method (LMM). Firstly, a numerical investigation and parametric study on the cyclic plasticity behaviour of a butt-welded pipe under cyclic thermal …
-
The effect of certain hydrophilic polymers on suspension stability
… of the suspensions to the potential energy of interaction curves. Generally, the agreement between theory and experiment was good, but for hydroxyethyl cellulose-ibuprofen systems discrepancies were found. Experimental studies showed that hydroxyethyl cellulose flocculated polystyrene latex …
-
Precast concrete load bearing wall panels
… assembled in the form of a space frame. So far interaction curves have been made available in some design books only for the prestressed concrete member having rectangular cross-sections and for any other shape, approximations are made, such as making a rectangular section having an equivalent …
-
Inelastic behaviour of steel beam-columns
… the peak of the applied load versus deflection curves. The Newton-Raphson method is employed for the iteration in the analysis.Solutions of the integration of stress resultants are obtained with the Gaussian guadrature formulae. Experiments of eight full-scale steel beam-columns loaded …
-
Nonlinear inelastic analysis of concrete-filled steel tubular slender beam-columns
… predicting load-deflection and axial load-moment interaction curves for CFST slender columns under axial load and uniaxial bending, biaxial loads, preloads or axial load and cyclic lateral loading. The numerical models developed are verified by comparisons of computer solutions with existing …
-
Behaviour of Partially Composite Precast Concrete Sandwich Panels under Flexural and Axial Loads
… Following this study, the axial-bending interaction curves were established for the new wall design using both BFRP and steel connectors and reinforcement. Eight panels were axially loaded to predesignated loads then loaded in flexure to failure. A technique is presented to experimentally …
-
Soil–structure interaction under strong seismic moment: material and geometric nonlinearity
… analysis to extract backbone load-displacement curves. Moreover, time-domain analysis using pulses or earthquake records as bedrock excitation was carried out to elucidate the nonlinear features of the dynamic response of the soil-foundation system. Based on theseanalyses, a macroscopic …
-
Distortional Lateral Torsional Buckling of Doubly Symmetric Wide Flange Beams
… overhang. The solution is then used to generate interaction curves for beams with an overhang subjected to various proportions of uniformly distributed and point loads. The second contribution of the thesis adds two additional features to the formulation (a) to capture the destabilizing effect …
-
Ενίσχυση υποστυλωμάτων οπλισμένου σκυροδέματος με νέα υλικά: ινοπλέγματα ανόργανης μήτρας, οπλισμοί σύνθετων υλικών ή ανοξείδωτου χάλυβα σε εγκοπές
The effectiveness of a new structural material, namely Textile-Reinforced Mortar (TRM), was investigated experimentally in this PhD Thesis as a means of confining old type reinforced concrete (RC) columns with limited capacity due to bar buckling or due to bond failure at lap splice regions. …