Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Intercooler"”.

  1. Preliminary design and integration procedures for gas turbine intercoolers on naval combatants

    … environmental constraints and an assumed overall intercooler effectiveness, provides mass flow rates of seawater and ethylene glycol, heat exchanger effectiveness and size, intermediate fluid temperatures, and air and seawater outlet temperatures. The output provides preliminary data for specific …

    vt Repository record for Preliminary design and integration procedures for gas turbine intercoolers on naval combatants (opens in a new tab)

  2. Peformance of Two-Stage CO2 Refrigeration Cycles

    … with suction line heat exchanger, the cycle with intercooler, and two-stage split cycle. The cycle operation at the low evaporating temperature was limited by the high discharge temperature for most cycle options except the two-stage split cycle. The compressor used in the testing was a hermetic, …

    maryland Repository record for Peformance of Two-Stage CO2 Refrigeration Cycles (opens in a new tab)

  3. Análise dos efeitos da manutenção periódica de tratores agrícolas através do método de planejamento de experimentos

    … bomba injetora rotativa, turboalimentado e com intercooler. Os parâmetros de controle são escolhidos com base na experiência do autor e seus níveis são definidos experimentalmente. São eles: a) condição externa do radiador, b) condição do filtro de combustível, c) condição do filtro de ar, d) …

    brazil-ufrgs Repository record for Análise dos efeitos da manutenção periódica de tratores agrícolas através do método de planejamento de experimentos (opens in a new tab)

  4. Modeling of Industrial Air Compressor System Energy Consumption and Effectiveness of Various Energy Saving on the System

    … methods. These components include compressor, intercooler and dryer. Temperature is a crucial parameter that determines the energy consumption applied by these components. If optimum temperature can be determined, plenty of energy savings will be realized.

    iupui Repository record for Modeling of Industrial Air Compressor System Energy Consumption and Effectiveness of Various Energy Saving on the System (opens in a new tab)

  5. Use of a Thermodynamic Engine Cycle Simulation to Study a Turbocharged Spark-ignition Engine

    … to investigate the effects of compression ratio, intercooler effectiveness, etc. for the turbocharged spark-ignition engine over the entire load and speed range. The simulation studies helped in understanding the behavior of turbocharged sparkignition engine with these parameters. A simulation …

    tamu Repository record for Use of a Thermodynamic Engine Cycle Simulation to Study a Turbocharged Spark-ignition Engine (opens in a new tab)

  6. Thermal management and control of a homogeneous charge compression ignition (HCCI) engine

    … air pressure, supercharger bypass and finally an intercooler, so that a wide range of combinations of pressures and temperatures can be achieved at the intake ports. In order to facilitate this control, a complete simulation model of the thermal system for a pressure-boosted multi-cylinder HCCI …

    birmingham Download PDF for Thermal management and control of a homogeneous charge compression ignition (HCCI) engine (opens in a new tab)

  7. Improvement of measurement efficiency at the engine test bench

    … on the load and the speed of the engine. The intercooler, (exchanger air/air), being not present on a test bench, the intake air down-stream the turbocharger is cooled down by an air-water heat exchanger. This water is either warmed up by a heater or cooled down by a water-water heat …

    chalmers Repository record for Improvement of measurement efficiency at the engine test bench (opens in a new tab)

  8. Computer simulation of the steady-state thermodynamic processes and piston ring wear for a multi-stage intercooled reciprocating air compressor

    … properties of the gas inside the cylinders, the intercoolers and the inlet and discharge manifold. The compressor valves are modeled as single degree-of-freedom, spring-mass=damper systems. The flows through the valves are calculated based on the steady flow equations for equivalent orifices. The …

    vt Repository record for Computer simulation of the steady-state thermodynamic processes and piston ring wear for a multi-stage intercooled reciprocating air compressor (opens in a new tab)

  9. Análisis del proceso de la recirculación de los gases de escape de baja presión en motores Diesel sobrealimentados

    … esto es, la durabilidad del compresor y el intercooler , se han reducido. Además, los sistemas de EGR de baja presión han adquirido un considerable interés recientemente por permitir llevar a cabo altas tasas de EGR manteniendo bajas temperaturas de admisión. Si bien la bibliografía acerca …

    upv Repository record for Análisis del proceso de la recirculación de los gases de escape de baja presión en motores Diesel sobrealimentados (opens in a new tab)

  10. Evaluation of dynamic models for refrigeration system components : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Process and Environmental Technology at Massey University

    … were derived to represent a typical industrial intercooler (pressure vessel). These models were tested by comparison of predictions to the measured time-temperature response of two pilot plant calorimeters containing R134a, when subjected to changing heat inputs. The measured response rate was …

    massey Repository record for Evaluation of dynamic models for refrigeration system components : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Process and Environmental Technology at Massey University (opens in a new tab)

  11. Improving the performance of μ-ORC systems

    … the integrated configuration and optimizing the intercooler boiler design.

    liege Repository record for Improving the performance of μ-ORC systems (opens in a new tab) Restricted access

  12. Innovation in micro gas turbines for aeronautical applications

    … have been identified: the adoption of an intercooler, for instance. The implementation of these remedies has the potential to improve the efficiency of the power plant. However, they usually lead to reduce the specific installed power, mainly due to the added weight of extra components …

    city-london Download PDF for Innovation in micro gas turbines for aeronautical applications (opens in a new tab)

  13. Investigation of particle number measurement and combustion and emissions from alternative fuels in diesel engines

    … injection diesel engine equipped with EGR and intercooler. The engine is EURO 5 compliant. The combustion performance was measured with a pressure transducer installed at the top dead centre (TDC) of one combustion cylinder. The particle number size distribution and gaseous emissions were …

    whiterose Download PDF for Investigation of particle number measurement and combustion and emissions from alternative fuels in diesel engines (opens in a new tab)

  14. Flow Management in Heat Exchanger Installations for Intercooled Turbofan Engines

    … transfer metric on overall design layout of the intercooler turbofan engine was investigated. This design study has shown that is it possible to accommodate the heat exchanger matrices (for a given matrix size requirement) with a minimal (2%) additional pressure loss penalty in the bypass duct.

    oxford Restricted access

  15. Investigation of CO2 avoidance behaviour of membrane capture in post combustion processes

    … This makes it possible to have a uniform intercooler design for each stage. A pressure drop of 30 mbar inside each cooler was investigated. This extensive system design results in an energy demand of 292 kWh/tonseparated CO2, a separation degree of 78% and an efficiency loss of …

    chalmers Repository record for Investigation of CO2 avoidance behaviour of membrane capture in post combustion processes (opens in a new tab)

  16. A thermodynamic analysis of a proposed power plant to mitigate carbon dioxide emissions

    … cycle temperature increases and decreases as intercooler exit temperature increases. These parameters both have a more significant impact on the performance of the MATIANT cycle than changes in oxygen delivery temperature, fuel pressure or maximum cycle pressure. Cycle performance can be …

    ut-knoxville Repository record for A thermodynamic analysis of a proposed power plant to mitigate carbon dioxide emissions (opens in a new tab)

  17. Modeling of a pilot plant for the CO2-reactive absorption in amine solvent for power plant flue gases

    … It has been observed that intercalating the intercooler between absorber bottom stages gives better results than between absorber top stages. Simulation results have shown that the thermal energy consumption decreased by up to 6%. In the case of a flue gas pre-cooling before the absorber …

    liege Repository record for Modeling of a pilot plant for the CO2-reactive absorption in amine solvent for power plant flue gases (opens in a new tab) Restricted access

  18. Design for Additive Manufacturing of high performance heat exchangers

    Heat exchangers are integral parts for thermal management and find countless applications in automotive, aerospace, energy, nuclear power plants, HVAC, etc. Due to intensive research & development and technological advancements in manufacturing technologies, there is an increasing rise in demand …

    mcmaster Repository record for Design for Additive Manufacturing of high performance heat exchangers (opens in a new tab)

  19. A Compressed Air System Model for Analysis and Design

    The typical efficiency of a compressed air system ranges from 5% to 20%, making it one of the most expensive utilities in industrial plants, hence its name, “the fourth utility”. It is certain that compressed air is an inefficient way to power any industrial machine; however with the large number …

    tamu Repository record for A Compressed Air System Model for Analysis and Design (opens in a new tab)

Page 1 of 2