Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"Interface Pressure"”.
-
INTERFACE PRESSURE FOR CONTACTING SURFACES
… The ability to measure and monitor the pressure distribution between the mating flanges would contribute towards a better understanding of leakages and hence improve sealing. The objective of this project is to develop a sensing system capable of measuring and monitoring the pressure …
-
Dynamic interface pressure between seated users and their wheelchairs
<p>Little is known about the dynamic pressure distribution changes, as compared to static pressure distribution, that take place on the sitting surface of a wheelchair while one propels oneself on a level surface. An understanding of these dynamic pressures may influence the design of wheelchair …
-
Dynamic interface pressure measurement : comparing two trans-tibial socket concepts
… designs for the trans-tibial prosthetic case. Pressure distribution studies, comfort and functionality are potential methods of assessing and distinguishing the conceptual differences. This study investigated pressure distribution at the stump-socket interface, using a technique able to give …
-
Development and evaluation of an interface pressure transducer for biomedical applications
The measurement of the interface pressure between a biomedical device and part of the human body is useful to aid in the design or improve the performance and safety of such devices. Therefore, a need exists for a transducer to measure interface pressure in these applications. The development and …
-
Radio Telemetry to Measure Interface Pressure Between Prosthetic and Residual Limbs
… radio telemetry system was designed to transmit pressure data at the prosthetic limb-residual limb interface, and foot floor contact information in lower extremity amputees, to a stationary computer based data acquisition system. The telemetry system consists of two basic units, the transmitter …
-
The effect of drawbar load and tire inflation on soil-tire interface pressure
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Department of Agricultural Engineering, 1959
-
Development of an approach for interface pressure measurement and analysis for study of sitting
… subject groups and other related aspects. The interface pressure between the human buttock and the supporting surface is an important metric which has been generally adopted for the evaluation of sitting-related issues. In order to provide a comprehensive view on the major issues of interface …
-
Seat Interface Pressure Mapping to Improve Weight Shift Performance in Spinal Cord Injured Wheelchair Users
… of using of a smartphone-based, on-demand seat interface pressure map on trunk activity, weight shifts, and self-efficacy in spinal cord injured wheelchair users in their home environments. We hypothesized that daily trunk activity and time spent in partial and full weight shift positions would …
-
The Effects of Compression Wrapping Techniques and Primary Wound Dressings on Leg Skin Interface Pressure
… applications can be evaluated by defining interface pressure (IP) and IP distributions associated with specific textile combinations.2 During compressive applications where an open wound is present, primary wound dressings should be used in combination with compressive wraps. Primary wound …
-
An investigation into interface pressure (ip) risk of healthy volunteers on modern medical imaging and radiotherapy tables
Background and RationalePressure ulcers (PUs) present significant threats to patients and cost billions of total healthcare expenditure. In radiography/radiotherapy, a potential for high interface pressure (IP) on radiography/radiotherapy tables may exist, however no study has investigated this to …
-
EVALUATING THE EFFECT OF PATTERN OF INFLATION AND DEFLATION AND CYCLE TIME ON THE PRESSURE RELIEVING CHARACTERISTIC OF A DYNAMIC SEAT CUSHION USING SEAT INTERFACE PRESSURE MEASUREMENTS
Ulceration due to pressure can occur in any individual who is restricted to a prolonged stay in a bed or a chair with no pressure relief. Intermittent pressure relief has been recommended as a means to lower the risk of pressure ulcer development. Active cushions cyclically change the area of …
-
Compression under pressure: physiological and methodological factors influencing the effect of compression garments on running economy
… of exercise, type of garment worn, and the interface pressure produced by the garment. The interface pressure applied by compression clothing is an important measure in evaluating the bio-physical impact of compression. Interface pressure values obtained in vivo with two portable pressure …
-
Developing a framework for an adaptive transtibial prosthetic socket using FEA-based tissue injury risk estimation and generalised predictive control
… changes. The socket is the primary load-bearing interface and user comfort is greatly linked to the quality of the socket fit. Poorly fitting sockets cause pain, limb tissue injuries, limited device usage, and potential rejection. Contact stresses at the socket-limb interface and strain of …
-
Pressure mapping of medical compression bandages used for venous leg ulcer treatment
… venous ulcers. MCBs should be applied with a pressure gradient reducing from the ankle to the knee. Visual inspection of bandages in situ for the amount of extension and overlap in the MCBs is normally what nurses use in day by day clinical practice to control the pressure they apply to …
-
Yield improvement of chemical mechanical planarization processes
… is developed based on the MRR equations with interface pressure as a control parameter. The interface pressure is varied spatially and/or temporally across the die. In this concept, three control strategies are developed and studied. The strategies are included spatial pressure control, …
-
Analysis of Thermo-Mechanical Stresses in Joints and Cables
… the electrical breakdown strength of insulation interfaces in cable joints depends on the mechanical pressure. Based on the literature, it has been shown that increasing the mechanical pressure in cable joints at the interface is important for ensuring high electrical breakdown strength. However, …
-
An integrated human factors approach to design and evaluation of the driver workspace and interface: Driver perceptions, behaviors, and objective measures
An ergonomic driver workspace and interface design is essential to ensure a healthier and comfortable driving experience in terms of driver perceptions, postures, and interface pressures. Developing more effective methods for driver-side interior design and evaluation, hence, requires thorough …
-
Yield improvement in chemical mechanical planarization via material removal variation on a surface
… removal based on proportionality parameters like interface pressure, table speed and pattern density. The thesis provides a complete chart for developing a control mechanism for CMP process. The thesis bifurcate the approach into Die scale and Wafer Scale. In die scale, a comprehensive control …
-
Evaluating the long term performance of hospital replacement mattresses
This study focused on evaluating pressure relieving properties of five hospital replacement mattresses utilized in a hospital in the Texas Medical Center in Houston. The Mini-Texas Interface Pressure Evaluator was used to monitor pressure in mmHg at the interface between a bowling ball and the …
Page 1 of 4