Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"Interface Resistance"”.
-
Molecular dynamics simulation of the carbon nanotube - substrate thermal interface resistance
… many high performance applications, the thermal resistance between chip and heat sink may account for half of the total thermal budget. Chip-level heat dissipation is therefore a critical bottleneck to the development of advanced microelectronics with high junction temperatures. Recently aligned …
-
Thermal Transport on the Nanometer Scale and the Effect of Microstructure and Interface Resistance
… TiN/MgO(001), TiN/MgO(111) and TiN/Al2O3(0001), interfaces, measured at temperatures between 79.4 and 294 K using time-domain thermoreflectance, are essentially identical and in good agreement with the predictions of lattice dynamics models and the diffuse mismatch model. Near room temperature G …
-
The effect of thermal diffusion on the formation of interface resistance on oxide-coated cathodes
… many of the factors which contribute to cathode interface resistance formation in a commercial type twin triode and to analyze these factors quantitatively by well known chemical and physical methods, However, since the vacuum tube represents such a complex system it is necessary to introduce …
-
Thermal Interface Resistance between Liquid Water and Face Centered Cubic Transitional Metals: Non-Equilibrium Molecular Dynamics Simulation
… and shifts in the technology. Thermal interface resistance is one of those developments that is significant in understanding and tackling thermal transport technologies in nano scales. The thermal transport at the interfaces of solids and liquids has been a measurement challenge for …
-
A Periodic Technique for Measuring Thermal Properties of Thin Samples
… are therefore subject to large error due to the interface resistance between the temperature sensor and the sample. The technique uses measurements of the amplitude and phase of the periodic temperature across both a reference sample and the unknown material at several different frequencies. …
-
Analysis of Electrical Properties of the P3HT-Bi2Te3 Interface for Polymer-Inorganic Composite Modelling
… two segments of P3HT and used to determine if an interface resistance exists between the materials. The ideal resistance of this architecture was determined by estimating the sum of the resistance of each portion and assuming the current could pass between the P3HT and Bi2Te3 without encountering …
-
Investigation of liner-host pipe strength and its influence on behaviour at ring fracture
… shear stress transfer across the liner–host pipe interface. Experimental and numerical studies have investigated liner–host pipe behaviour under loading at transitions between intact and deteriorated or structurally deficient host pipe sections. However, limited work has characterized the …
-
An Innovative Thermal Management Solution for Cooling of Chips with Various Heights and Power Densities
… fabricated, and tested experimentally. Thermal interface resistance was experimentally discovered and confirmed with numerical simulations. A circuit board simulator was constructed. This simulator was meant to mimic a multi-processor circuit board with heat sources of different surface areas, …
-
Thermal characterization of InAs interfacial misfit arrays using nanosecond thermoreflectance method
… It was also found that the thermal interface resistance between the growth and the substrate was inversely proportional to the thickness of the IMF growth.
-
Theory and simulation of magnetism and spin transport in semiconductors
… WHICH TAKES INTO ACCOUNT THE EFFECTS OF INTERFACE RESISTANCE HAS BEEN PRESENTED. SPIN-INJECTION EFFICIENCY AND MAGNETORESISTANCE WHICH ARE THE KEY PARAMETERS IN ANY SPINTRONICS DEVICE ARE STUDIED IN DETAIL. IT WAS FOUND THAT INTERFACIAL RESISTANCE WHICH IS DUE TO SPIN-SELECTIVE TUNNEL …
-
Properties of polycrystalline GaAs films grown by the close spaced vapour transport technique on Mo substrates
… for use in solar cells provided that the Mo/GaAs interface resistance can be reduced.
-
Design and construction of a thermal contact resistance and thermal conductivity measurement system
… the development of an accurate thermal contact resistance and thermal conductivity measurement system that was simple enough to be constructed and operated by multiple users. A method based on Fourier’s Law of Conduction was developed. The purpose of this device is to analyze component …
-
A polypropylene carbonate-based adaptive buffer layer for stable interfaces of solid polymer lithium metal batteries
… metal anode and SPE leads to high interfacial resistance and low specific capacity of a battery. In this work, we present a novel strategy to improve this solid-solid interface problem and maintain good interfacial contact during battery cycling by introducing an adaptive buffer layer (ABL) …
-
Real-Time Monitoring of Short-Term Steel Corrosion in Cement and Soil
… was then used to get the model parameters: bulk resistance (Rb), contact resistance (Rc) & interface resistance (Ri), and contact capacitance (Cc) & interface capacitance (Ci) for the Vipulanandan Impedance Corrosion Model. The electrical corrosion index for each specimen was then observed over …
-
Thermal Conductivity of Single Wall Carbon Nanotube and Copper Coaxial Nanocomposite
… nanowire is estimated based on the electrical resistance analogy. The calculations showed that the thermal conductivity of a SWCNT-Cu nanowire is up to 24% higher than that of a corresponding pure SWCNT. Secondly, the identical SWCNT-Cu nanowire is placed in water instead of vacuum. The …
-
Determination of Lateral Resistance of Deck Tie Fasteners in Smooth Top Bridge Girders
… design aids for the determination of lateral resistance capacity and spacing requirements of deck tie fasteners in curved railroad bridges with smooth top girders. In railroad bridge design, required lateral resistance dictates the spacing of deck tie fasteners. Currently, no provisions exist …
-
Plasmonic Nanoparticle Laden Medium for Solar/Thermal Energy Storage
… for longer. Compromise between the thermal resistance at the interface of the particle and film as well as the absorption from radiation in order to determine the proper particle type, size, and medium is studied. The effect of the inclusion of the particle/film interface resistance is …
-
Understanding the Complex Interplay of Factors in Rail Buckling: A Finite Element Approach
… algorithm, as well as modifying the tie-ballast interface resistance formulation, and restructuring the variational formulation of the governing differential equations. The key focus of this research is to demonstrate the application of the displacement-control algorithm for modeling rail …
-
Characterization of Wafer Bonding Condition by Using Electrochemical Impedance Spectroscopy (EIS)
… method for the characterization of wafer bonding interfaces using Electrochemical Impedance Spectroscopy (EIS) with a ball-to-rod magnetic probe configuration. The study investigates the electrical behavior of different bonded interfaces for correlating impedance characteristics with bonding …
-
Σεισμική συμπεριφορά ωπλισμένων διεπιφανειών σε επισκευασμένα/ενισχυμένα στοιχεία ωπλισμένου σκυροδέματος
… action of the reinforcing bars crossing the interface), acting along the interface between the old and the new concrete, subjected to cyclic actions. The interfaces under investigation are met in repaired/ strengthened RC elements, in case a new concrete layer or new RC elements are added to …
Page 1 of 3