Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 80 for “"Interface behavior"”.
-
Micromechanical modeling of rough interface behavior
In this dissertation, the interface behavior of contacting rough surfaces was studied systematically based upon micromechanical modeling. Firstly, asperity contact mechanics was further developed. It was found that tangential tractions, displacement and compliance are path dependent in both …
-
Atomistic Calculations of Nanoscale Interface Behavior in FCC Metals
This dissertation focuses on the behavior of homogeneous FCC metallic interfaces on the nanoscale. Specifically, atomistic calculations (molecular statics and molecular dynamics) with embedded-atom method potentials are used to study the fundamental failure processes that occur at a bicrystal …
-
Study of steel-concrete interface behavior of reinforced concrete members
… this thesis work is to study the steel-concrete interface behavior of reinforced concrete members using the nonlinear finite element method.</p><p>The reinforced concrete member was modeled as a continuum consisting of plane stress rectangular elements which represent the concrete, pin-joint two …
-
INFLUENCE OF INTERFACE BEHAVIOR IN DYNAMIC SOIL-STRUCTURE INTERACTION PROBLEMS.
Under static of dynamic loadings, the junction (interface) between a structure-foundation system can experience contact, slip, separation and rebonding modes of deformations. Two interface models are proposed for simulation of interface behavior in finite element analysis of dynamic soil-structure …
-
Criticality in two dimensions : numerical studies, interface behavior, and colossal magnetoresistance
Contains fulltext : 18614.pdf (Publisher’s version ) (Open Access)
-
TESTING, MODELLING, AND APPLICATIONS OF INTERFACE BEHAVIOR IN DYNAMIC SOIL-STRUCTURE INTERACTION.
The behavior of the interface between dry Ottawa sand and concrete has been studied using a new device developed for the cyclic testing of interfaces and joints. The stress conditions existing in the test device are investigated using stress cell measurements and a two-dimensional finite element …
-
An investigation into interface behavior and delamination wear for diamond-coated cutting tools
… through fundamental understanding of the interface adhesion of chemical vapor deposition (CVD) diamond-coated tungsten carbide cutting tools. CVD diamond-coated cutting tools have the advantages of superior tribological properties and low cost in fabrications compared to polycrystalline …
-
Si-SiO2 interface behavior in n-MOSFETs with screening potential during high-field injection
… The hot carrier lifetime is directly related to interface state density (Dit), measured by charge pumping method. The results suggest that hot electron degradation could be severe or mild for devices affected by plasma damage depending on their exposure to the level of screening potential. This …
-
Experimental and numerical study of the rod shear test for determining steel-sand interface behavior
… tests in sands have produced anomalously high interface friction angles (δ) which may be, at least in part, due to differences in how the normal stress on the model pile has been interpreted. Therefore, the usefulness of the rod shear test as a means to determine interface behavior for pile …
-
Local wall shear stress and interface behavior of adiabatic air-water flows in rectangular ducts
An experiment was designed and built to study vertical annular air-water flows in a channel with a rectangular cross section with no heat transfer. Flush-wire electrical conductivity probes were theoretically analyzed to demonstrate their potential to accurately measure liquid film thickness in the …
-
Constitutive modeling of thermomechanical response of materials in semiconductor devices with emphasis on interface behavior
… describes the hardening response of materials/interfaces during monotonic as well as cyclic thermomechanical loads. In addition to the thermoplastic model, a thermoviscoplastic model, δ(vθ), presented here is used to simulate creep and stress relaxation mechanisms at elevated temperatures; here …
-
Quantitative assessment of the effect of copper chills on casting/chill interface behavior and the microstructure of sand cast A319 alloy
… concept quantitatively. The model simulates the behavior of the Casting/chill interface and also predicts the cooling rates resulting from different casting conditions when using solid chill and water-cooled chill.
-
Interface Behavior of Water Saturated Limestone Rock Joints Using Hollow Cylinder Testing and A Case History Regarding Mine Roof Stability: Fort Hartford Mine Superfund Site
… of fluid pressure and mean stress on the joint interface shear strength was investigated for generalized stress conditions. It was found that an increase in intermediate principal stress resulted in measurable increases in joint interface shear strength, especially at lower normal stresses. …
-
MODELLING OF NORMAL AND SHEAR BEHAVIOR OF INTERFACE IN DYNAMIC SOIL-STRUCTURE INTERACTION.
The interface normal behavior between Ottawa sand and concrete for static and cyclic loading has been studied using Cyclic Multi Degree-of-Freedom test device. The static force controlled test for the interface showed exponential relation between normal stress and strain during initial loading, …
-
Constitutive modeling of static and cyclic behavior of interfaces and implementation in boundary value problems
… theory is proposed here to describe the behavior of interfaces subjected to static and cyclic loading conditions. The proposed model is developed in a hierarchical manner wherein a basic model describing simplified characteristics of the interfaces is modified by introducing different …
-
SHEAR RESPONSE OF UNSATURATED CLAY–GEOTEXTILE INTERFACE UNDER A WIDE RANGE OF SUCTIONS
Soil–geotextile interface behavior governs the performance of many geotechnical systems, including mechanically stabilized earth walls, reinforced slopes, pavements, embankments, and landfill cover systems. Although the behavior of these interfaces has been widely investigated under saturated …
-
Lubrication mechanisms and their influence on interface strength during installation of subsurface pipes
… frictional resistance generated at the pipe-soil interface. Even though lubrication is widely utilized, there is not a clear understanding of the conditions required to obtain the full benefit of lubrication. This dissertation focuses on bentonite slurry characteristics and interface behavior …
-
Numerical modeling and analysis of pullout tests of sheet and geogrid inclusions in sand
… description of the soil-inclusion interface behavior. There is, therefore, a need for an improved evidence-based understanding of the factors influencing the pullout resistance of different inclusions. Accordingly, the main objective of this study was to capture the pullout response …
-
Durability analysis of bond between composite materials and masonry substrates
… applied, depends on the long-term bond behavior between these materials and the masonry substrate, but research in this area is still very limited. The main purpose of this thesis is to create a basis for a general approach to durability of masonry components strengthened with composite …
-
Computational Approaches to Understanding Subduction Zone Geodynamics, Surface Heat Flow, and the Metamorphic Rock Record
… processing of subducted materials along the interface between converging plates. Previous work demonstrates the possibility of decoding such geodynamic information by comparing numerical geodynamic models with empirical observations of surface heat flow and the metamorphic rock record. …
Page 1 of 4