Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 67 for “"Interface friction"”.

  1. Evaluation of interface friction between cohesionless soil and common construction materials

    A reliable quantitative assessment of interface friction parameters between construction materials and the surrounding soil mass where this interface represents a potential failure surface, will allow for less conservatism and/or safer design of soil-structures. This can only be achieved if the …

    ubc Repository record for Evaluation of interface friction between cohesionless soil and common construction materials (opens in a new tab) Download PDF for Evaluation of interface friction between cohesionless soil and common construction materials (opens in a new tab)

  2. Jacking Force Prediction: An Interface Friction Approach based on Pipe Surface Roughness

    This study identifies mechanisms controlling interface shearing between pipes and granular materials and develops a predictive jacking force calculation model. The surface roughness of six pipe materials, including Hobas (Centrifugally Cast Fiber Reinforced Polymer Mortar), Polycrete (Polymer …

    gatech Repository record for Jacking Force Prediction: An Interface Friction Approach based on Pipe Surface Roughness (opens in a new tab)

  3. An experimental investigation into the effect of interface friction on bagasse compaction between grooved steel platens

    … and surface condition at the roll bagasse interface. Factories use welding procedures to arc roughen the tips of grooves in an effort to increase friction. Although industry procedures appear ad hoc it is clear that some level of roughness is crucial to performance. A similar statement can …

    jamescook Download PDF for An experimental investigation into the effect of interface friction on bagasse compaction between grooved steel platens (opens in a new tab)

  4. The influence of interface friction and w/h ratio on the violence of coal specimen failure

    … research investigated the influence of interface friction and w/h ratio on the violence of coal specimen failure. In satisfying this objective, three violent failure parameters such as peak SPL, core zone failure, and ultimate stress were used to assess the violence of failure. The …

    wvu Repository record for The influence of interface friction and w/h ratio on the violence of coal specimen failure (opens in a new tab)

  5. Experimental and numerical study of the rod shear test for determining steel-sand interface behavior

    … tests in sands have produced anomalously high interface friction angles (δ) which may be, at least in part, due to differences in how the normal stress on the model pile has been interpreted. Therefore, the usefulness of the rod shear test as a means to determine interface behavior for pile …

    arizona-thes Repository record for Experimental and numerical study of the rod shear test for determining steel-sand interface behavior (opens in a new tab)

  6. Pipe-soil interaction aspects in buried extensible pipes

    … axis. As a part of the derivation, a modified interface friction model was developed considering the increase in friction due to constrained dilation of the soil, and the impact of mean effective stress on soil dilation. This interface friction model was combined with a nonlinear pipe …

    ubc Repository record for Pipe-soil interaction aspects in buried extensible pipes (opens in a new tab) Download PDF for Pipe-soil interaction aspects in buried extensible pipes (opens in a new tab)

  7. Three-dimensional finite element modeling of total hip arthroplasty: Creep under dynamic load.

    … and (3) Determine the invitro stem cement interface friction coefficient through parametric analysis. Results indicated that the stem subsidence and cement mantle stresseswere influenced by the choice of acrylic bone cement due to differences in the creep response. After a 24 hour period, …

    wvu Repository record for Three-dimensional finite element modeling of total hip arthroplasty: Creep under dynamic load. (opens in a new tab)

  8. A model for the response of single timber fasteners and piles under cyclic and dynamic loading

    … and medium. In this thesis, the effect of interface friction, and the initial confining pressure surrounding the fastener/pile has been included in the model. Due to the inclusion of interface friction, the model allows, in the case of piles, the study of problems with horizontal and/or …

    ubc Repository record for A model for the response of single timber fasteners and piles under cyclic and dynamic loading (opens in a new tab) Download PDF for A model for the response of single timber fasteners and piles under cyclic and dynamic loading (opens in a new tab)

  9. How to mitigate coal mine bumps through understanding the violent failure of coal specimens

    … proposed mechanisms for coal bumps.;Third, the interface friction and the width-to-height (W/H) ratio of coal specimens were determined where bump would occur. The W/H ratio ranges from 1 to 10 while the interface friction is either 0.1 or 0.25. It is believed that understanding how the mode of …

    wvu Repository record for How to mitigate coal mine bumps through understanding the violent failure of coal specimens (opens in a new tab)

  10. AN EXPERIMENTAL EVALUATION OF FABRIC STRENGTH PROPERTIES AND BEHAVIOUR OF FABRIC REINFORCED SOIL

    … under various test conditions, the soil-fabric interface frictional resistance and the soil-fabric composite behaviour have been investigated. Different types of tensile test are carried out on high strength woven polyester fabric (i) unconfined uniaxial tensile test on yarns, narrow strip and …

    nus Repository record for AN EXPERIMENTAL EVALUATION OF FABRIC STRENGTH PROPERTIES AND BEHAVIOUR OF FABRIC REINFORCED SOIL (opens in a new tab) Download file for AN EXPERIMENTAL EVALUATION OF FABRIC STRENGTH PROPERTIES AND BEHAVIOUR OF FABRIC REINFORCED SOIL (opens in a new tab)

  11. Investigation of Oxide Fiber/oxide Matrix Composites With a Weak Interphase

    Interface properties of four kinds of fiber model systems were obtained by analyzing pushout data with the linear model, the shear-lag model, and the Liang-Hutchinson model. These interface properties include interface fracture energy, coefficient of friction, clamping pressure, interface debond …

    uiuc Repository record for Investigation of Oxide Fiber/oxide Matrix Composites With a Weak Interphase (opens in a new tab)

  12. Evaluation of drained residual interface strength between silty/dry sand & various surfaces at low effective stresses

    … this study is to investigate how a sand-surface interface behaves under low effective stresses. The main objectives of this study are to- (1) record the peak and residual interface friction between sandy soils and different interfaces using tilt-table apparatus; (2) observe whether different …

    texas Repository record for Evaluation of drained residual interface strength between silty/dry sand & various surfaces at low effective stresses (opens in a new tab)

  13. Micromechanics of stress-induced martensitic phase transformations

    … to take into account internal stresses, interface friction, and nonequilibrium evolution of all crystallographic parameters under multiaxial loading. In this study, the universal (i.e. independent of the constitutive equations) thermodynamic driving force for coherent interface …

    ttu Repository record for Micromechanics of stress-induced martensitic phase transformations (opens in a new tab)

  14. Micro-mechanical study of sand fabric during earthquake

    The seismically induced interface friction capacity of piled foundations is a function of the soil-pile interface friction, the relative stiffness of the pile and the soil and the volume changes in the soil adjacent to the pile which affect the strength and stiffness of the soil. In order to fully …

    whiterose Download PDF for Micro-mechanical study of sand fabric during earthquake (opens in a new tab)

  15. Experimental and finite element investigation of ultrasonic metal forming applications

    … developed to gain insight into material and interface mechanisms. FE simulations of the metal material included the effects of elasticity, plasticity, large deformation and a Coulombic interface friction boundary condition in the presence and absence of lubricants. Agreement was achieved …

    glasgow Download PDF for Experimental and finite element investigation of ultrasonic metal forming applications (opens in a new tab)

  16. Interface shear behaviour of different geomembranes with rough surfaces in Heap Leaching applications

    The interface shear strength properties of the different geosynthetic layers of the liner system are examined for heap leach pads applications. A series of large scale direct shear tests is used to examine the effectiveness of four geomembranes (GMBs) with different surface roughness with different …

    queens Repository record for Interface shear behaviour of different geomembranes with rough surfaces in Heap Leaching applications (opens in a new tab)

  17. Numerical Simulation of Pile Installation and Following Setup Considering Soil Consolidation and Thixotropy

    … displacements on the nodes at the soil-pile interface (volumetric cavity explanation), followed by vertical deformation to activate the soil-pile interface friction. The soil thixotropic effect was incorporated in the proposed model by applying a time-dependent reduction parameter, which …

    lsu-thes Repository record for Numerical Simulation of Pile Installation and Following Setup Considering Soil Consolidation and Thixotropy (opens in a new tab) Restricted access

  18. Statistical characterisation and prediction of interface stresses and lubrication in the cold rolling of metal strips

    … However, a thorough understanding of the interface contact of cold strip rolling has not yet been attained due to the complex asperity–asperity contact at the roll–strip interface and the coupled solid–fluid interactions. Successful control and optimisation of cold rolling cannot be …

    unsw Repository record for Statistical characterisation and prediction of interface stresses and lubrication in the cold rolling of metal strips (opens in a new tab)

  19. Soil-lubricant-structure interface mechanics for microtunnelling

    … behaviour of the soil-lubricant-structure (SLS) interface around these tunnel pipes during advances and stoppages, which results in excessive conservatism in the design stage.</p> <p>This thesis explores the behaviour of the SLS interface using a combination of field and laboratory study. Two …

    oxford Repository record for Soil-lubricant-structure interface mechanics for microtunnelling (opens in a new tab)

Page 1 of 4