Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Interface shear strength"”.
-
Experimental investigation of factors influencing interface shear strength
… in this thesis is focused on investigating the interface shear strength of cold joints subjected to pure shear through an experimental study comprising 21 push-off test specimens. Five key variables were examined: interface roughness, concrete shear area, reinforcement ratio, reinforcement …
-
Interface Shear Strength in Lightweight Concrete Bridge Girders
… to develop composite action, adequate horizontal shear resistance must be provided at the interface. As lightweight concrete is increasingly being used in bridge designs, it is important to understand the horizontal shear behavior of lightweight concrete. The current AASHTO LRFD Specification …
-
Effect of deformability of ridges on interface shear strength
… of these structures is controlled by the interface shear strength existing in the contact surfaces between the bales. However, the tire bale has a jagged, uneven and highly variable surface and it presents a number of irregular tire ridges with random dimensions that are difficult to …
-
Laboratory Investigation of the Effects of Temperature and Moisture on Interface Shear Strength of Textured Geomembrane and Geosynthetic Clay Liner
… the effects of temperature and moisture on the shear strength of textured geomembrane (T-GM) and geosynthetic clay liner (GCL) interface. Several landfill slope failures involving geosynthetics have occurred within the past three decades. Interface shear strength of T-GM/GCL is well documented …
-
Investigation of vertical shear strength in unreinforced interfaces between concrete cast at different times
… presents an experimental study of vertical interface shear strength between layers of concrete cast at different times. Current design provisions allow only for load to be transferred across reinforced interfaces. However, previous research has suggested that unreinforced interfaces can be …
-
A method for measuring smooth geomembrane/soil interface shear behaviour under unsaturated conditions
… are challenging to design to ensure adequate shear strength along the smooth geomembrane-soil interface. It is important to use the appropriate values of interface shear strength parameters in the design of slopes incorporating one or more geomembranes in contact with soils. The parameters are …
-
Interface Behavior of Water Saturated Limestone Rock Joints Using Hollow Cylinder Testing and A Case History Regarding Mine Roof Stability: Fort Hartford Mine Superfund Site
… the effects of confining fluid pressure on the shear strength of artificial rock joints for Holston Limestone. Tests were performed for confining fluid pressures of 0.14 MPa to 0.55 MPa and effective joint normal stresses of 0.16 MPa to 0.65 MPa. Mohr-Coulomb failure criterion was used to …
-
Shear behavior of geosynthetic clay liners and textured geomembranes in mining applications
The objective of this study was to evaluate the shear behavior of a composite system consisting of geosynthetic clay liner (GCL) and textured geomembrane (GMX) in mining applications. In current practice, design of liner and cover systems for waste containment is based on results of …
-
Pullout evaluation of uniaxial geogrids embedded in dredged material
… the use of dredged material by evaluating its interface shear strength with uniaxial geogrids. A series of laboratory pullout tests were conducted using two types of uniaxial geogrids (UX1400 and UX1700) embedded in three different soil types (Monterey Sand and two different dredged materials). …
-
Shear strength of soil-pipeline interfaces under low confining stresses and large displacements
… are adequately captured. The soil-pipe interface shear strength is an important design parameter that is required for assessing soil loads on pipelines. Laboratory element and physical model testing conducted under relatively large displacements and soil confining stresses relevant to …
-
Shear Strengthening of Pre-Cracked Cold Joints in Gravity Dams Using FRP Laminates
… repairing concrete structures because of their strength, light weight, and inability to corrode. While FRP applications are well established for diagonal shear strengthening and confinement of reinforced concrete as reflected in design guidelines like those from ACI 440, its use in large, …
-
Experimental Study of Hollow Fibre Reinforced Polymer Piles in Soft Clay
… program indicate that for all of the FRP pile interfaces tested the interface shear strength is higher or at least on par with steel pile interfaces. The findings presented in this work show that the FRP piles are a viable alternative to steel piles. Further studies in the form of full scale …
-
Performance Evaluation and Design Considerations for Reinforced Ultra-High Performance Concrete (UHPC) Bridge Decks and Connections
… bridge decks subjected to cyclic, monotonic, and shear loading. Furthermore, twelve quick and economical deck-to-girder connection using UHPC material only, without inserts, were prepared and tested using double shear test and the interface shear strength determining the interface shear strength …
-
Enhancement of Shaft Capacity of Cast-in-Place Piles Using a Hook System
… the effect of passive inclusion on pile-soil interface shear strength behaviour, employing a modified direct shear test apparatus. The interface strength obtained for pile-soil specimens was found to significantly increase when passive inclusions were implemented. Residual friction angle for …
-
Mechanical response of fiber-reinforced soil
… structure was recently proposed. The equivalent shear strength of fiber-reinforced soil can be predicted using the discrete framework by the independent characterization of soil and of fiber properties. An experimental testing program, including series of triaxial compression tests, triaxial …
-
SHEAR RESPONSE OF UNSATURATED CLAY–GEOTEXTILE INTERFACE UNDER A WIDE RANGE OF SUCTIONS
Soil–geotextile interface behavior governs the performance of many geotechnical systems, including mechanically stabilized earth walls, reinforced slopes, pavements, embankments, and landfill cover systems. Although the behavior of these interfaces has been widely investigated under saturated …
-
Evaluation of Wicking Geotextile for Enhanced Protection of Coastal Highway Embankment Slopes Vulnerable to Flooding
… earthen embankment slopes, softening their shear strength, leading to slope failure. This indicates that implementation of solutions that will drain water from coastal highway embankments during and after extreme rainfall events is required. In recent years, a new wicking geotextile was …
-
Experimental Investigation of Structural Performance of CLT-UHPC Composite Structures
… hygroscopic material, it has lower stiffness and strength compared to conventional concrete. To overcome these limitations, CLT is combined with an ultra-high-performance concrete (UHPC) overlay to form a CLT-UHPC composite, thereby enhancing durability, strength, and stiffness.The dissertation …
-
High Temperature Strength Reduces Soldering In Aluminum High Pressure Die Casting
… soldering occurs when the local interfacial shear stress between the casting and die surface exceeds the local shear strength of the casting. The ratio of these shear strengths, as a function of temperature, has been shown to predict solder. Research up to this point has focused on reducing …
Page 1 of 3