Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 253 for “"Interfacial Adhesion"”.
-
Moisture and Interfacial Adhesion in Microelectronic Assemblies
… science of moisture-induced degradation of interfacial adhesion. The research is comprised of both experimental and modeling components of analysis and consists of four primary components. First, the moisture transport behavior within underfill adhesives is experimentally characterized and …
-
Approximating Interfacial Adhesion Energies of Thermal Barrier Coatings
… dissertation is centered on approximating the interfacial adhesion energies of a thermal barrier coating (TBC) within a density functional theory (DFT) framework. The strategy is to develop and validate a computational protocol to study systems which enhance the interfacial adhesion of the …
-
Interfacial adhesion in metal/polymer systems for electronics
… different surface modification methods on the adhesion of electroless and sputter-deposited metals to dielectric polymers were investigated. The adhesion of Cu and Cr/Cu metallizations to the epoxies, liquid crystalline polymer and inorganic-organic hybrid polymer was measured with the newly …
-
ASSESSMENT OF INTERFACIAL ADHESION IN POLYMER LAMINATED SHEET METALS
… layer between the film and the substrate. The adhesion properties between the bonded materials are among the most important issues in PLSM forming operations. In this thesis, the main focus has been devoted to characterizing and improving the adhesion properties of the PLSM system for forming …
-
Micromechanical methods of measuring interfacial adhesion in solid-state batteries
… of the electrolyte mechanical properties and interfacial strength, on the observed failure mode (plastic deformation or delamination). A failure mode map was created, to facilitate future predictions of failure modes based on electrolyte properties. Through FEM, electrolytes with lower yield …
-
Characterizing interfacial adhesion between wood fibers and a thermoplastic matrix.
Interfacial adhesion across the fiber/matrix interface plays a critical role in controlling the performance of reinforced wood fiber and thermoplastic composites. In this study, the surfaces of cellulosic (rayon, cotton, and wood) fibers were chemically modified with acetic anhydride and …
-
Interfacial adhesion of thin film high energy density anode materials
… of Ni/a-Si systems. Here, we investigate Ni/a-Si interfacial adhesion strength through the technique of laser spallation (LS) combined with finite element analysis (FEA). It was found that the Ni/a-Si interface can withstand at least ~250 MPa in tension before failure is initiated. Tests at higher …
-
Measurement of Interfacial Adhesion in Glass-Epoxy Systems Using the Indentation Method
The adhesion of coatings often controls the performance of the substrate-coating system. Certain engineering applications require an epoxy coating on a brittle substrate to protect and improve the performance of the substrate. Experimental observations and measurements of interfacial adhesion in …
-
The influence of surface properties on carbon fiber/epoxy matrix interfacial adhesion
… but also to a great extent on the fiber/matrix interfacial adhesion. The focus of this work was to study carbon fiber surface chemical and physical properties and their effects on fiber/matrix adhesion. Untreated, commercially surface treated and oxygen plasma treated PAN based carbon fibers …
-
The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications
… interface is often reduced to a discussion of 'adhesion'. Past discussions of thermosetting matrices have typically focussed on the chemistry of thematrix system, specifically the task of maximising the level of chemical bonding between the fibre and the matrix to produce the strongest …
-
Determining Interfacial Adhesion Performance and Reliability for Microelectronics Applications Using a Wedge Test Method
… for characterizing material resistance to interfacial failure and for making interface reliability predictions. Because interfacial bond integrity is a major concern for performance and reliability, the need to evaluate the fracture and delamination resistance of an interface under …
-
Dependence of dark spot growth on cathode/organic interfacial adhesion in Organic Light Emitting Devices
… deposition and the use of cathode-organic interfacial layers in the OLED. Observations from microscopy, electrical measurements, surface morphology measurements, and adhesion tests are analyzed. Conclusions on the suppression of dark spot growth are discussed. The role of interfacial …
-
Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure
Development of the light weight material is necessary for cost optimization and reducing environmental pollution in the automotive industry. However, the aluminum solely does not provide the desired mechanical properties such as wear-resistance and stiffness and it is needed to be combined with …
-
Interfacial Adhesion Evaulation of Uniaxial fiber-Reinforced-Polymer Composites by Vibration Damping of Cantilever Beam
… properties of the fiber-matrix interface. Good interfacial bonding (or adhesion), to ensure load transfer from matrix to reinforcement, is a primary requirement for effective use of reinforcement properties. Thus, a fundamental understanding of interfacial properties and a quantitative …
-
Simulation and design of planarizing materials and interfacial adhesion studies for step and flash imprint lithography
… show that control of the polymer modulus and interfacial fracture energy is the key to minimizing the separation force. Adjusting the crosslinker concentration in the imprint formulation reduces the modulus but has no significant impact on the fracture energy. On the other hand, adding …
-
Studies of interfacial adhesion and copper plating chemistry for metallization of through-package-vias in glass interposers
… in achieving high quality Cu metallization. Poor adhesion between copper and glass can result in electrical failures caused by delamination. Low-quality Cu filling in high-aspect ratio TPVs can lead to void formation and mechanical reliability failures. These challenges associated with …
-
Effect of surface chemistry on the interfacial adhesion and mechanical properties of natural fiber reinforced polymer composites
Thesis (Ph. D.)--Michigan State University, Department of Chemical Engineering and Materials Science, 2003
Page 1 of 13