Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Interfacial Delamination"”.
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… in complexity with demands for functionality. Interfacial delamination remains a prominent failure mechanism due to mismatch of coefficient of thermal expansion (CTE). Numerous studies have investigated interfacial cracking in microelectronic packages using fracture mechanics, which requires …
-
Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials
… test method has been developed to measure the interfacial fracture toughness. Using the developed residual stress method and the single-leg bending test, the mode-mixity-dependent fracture toughness for NFU-SiN interface has been determined. In addition to such monotonic interfacial fracture …
-
Thermomechanical stress studies for advanced copper metallization and integration
… are directly related to void formation and interfacial delamination. In this study, the stress behavior of electroplated copper films was investigated using surface curvature measurement, with an emphasis on the passivation effect. It was found that the passivation introduces a stress …
-
Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface
Interfacial delamination is a prevalent failure mechanism in microelectronic packages. While much work has been performed towards understanding fracture of bimaterial interfaces under monotonic loading, investigation focused on the impact of fatigue loading on such structures is still evolving. …
-
Fracture and delamination of elastic thin films on compliant substrates : modeling and simulations
… LEFM and CZM are employed to study fracture and delamination of elastic thin films on compliant substrates under various loading conditions. First, compression-induced buckling of elastic thin films on elastic compliant substrates is studied by analytical and numerical methods. The critical …
-
Thermo-mechanical reliability of 3-D interconnects containing through-silicon-vias (TSVs)
… the carrier mobility change in transistors, the interfacial delamination of TSVs, and thermal stress interactions between TSVs. Among them, the mobility change in transistors was found to be sensitive to the normal stresses near the Si wafer surface. The surface area of a high mobility change was …
-
Cellulose fiber reinforced thermoplastic composites: Processing and Product Charateristics
… torque during melt processing, and to improved interfacial adhesion as well as fiber dispersion. As compared to pure CAB, AAEF generated the highest increase in torque (+ 421%) followed by AEF (+ 260%) and WEF (+ 190%) at 40% fiber content by weight. AAEF was also found to enhance the tensile …
-
Thermal deformation of electronic packages and packaging effect on reliability for copper/low-k interconnect structures
… much weaker low k dielectrics, packaging induced interfacial delamination in low k interconnects has been widely observed, raising serious reliability concerns for Cu/low k chips. This study involved thermo-mechanics analysis for both packaging and wafer level structures and was carried out using …
-
DELAMINATION IN MICROELECTRONICS PACKAGES: WITH CONSIDERATION OF THREE-DIMENSIONAL AND RATE EFFECTS
Interfacial delamination has been a concern in microelectronics packages. During the manufacturing and assembly process, high interfacial stress can result from thermal loading as the coefficient of thermal expansion varies among the various components in a microelectronics package. The objective …
-
The mechanical characterization of polymeric sandwich materials for marine applications
… Mode I fracture toughness of foam as well as the interfacial delamination fracture toughness at the foam/facing interface. In addition, the thermal properties of foam and facings were investigated as well as the effects of cryogenic temperatures. This dissertation presents several novel …
-
A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems
… simulation of interface adhesion properties and interfacial delamination cracking processes of thin film systems during indentation experiments using wedge-shape indenters. The cohesive zone model based on traction separation law (T-S) is employed during the FEM simulation. The cohesive zone …
-
Chip package interaction (CPI) and its impact on the reliability of flip-chip packages
… such as solder fatigue failure and underfill delamination. Moreover, the thermo-mechanical deformation of the package can be directly coupled into the Cu/low-k interconnect, inducing large local stresses to drive interfacial crack formation and propagation. The thermo-mechanical reliability …
-
In Situ Health Monitoring of Adhesively Bonded Joints during Fatigue Using Carbon Nanotube Network
… sensitive to crack initiation, propagation and delamination, therefore in-situ measurement of the bond resistance is capable of recording events that lead to failure. In 90% of the samples the change in bond resistance remains below 10% of the initial value up to approximately 80% of the fatigue …
-
The application of fracture mechanics to Mode I interfacial ice delamination and plasticity induced crack closure
… portion of this dissertation is on applying interfacial fracture mechanics and plate theory to develop a plate deformation model, which determines the initiation and steady-state interfacial fracture toughness for a crack under mode I loading. The second application details plasticity-induced …
-
Microstructural Investigation of Solder Joint Failure in Heavy Duty Trucks
… focused on Ag3Sn particle evolution and interfacial intermetallic compound (IMC) layers. The results showed measurable microstructural evolution, including changes in Ag3Sn particle morphology and distribution and variations in IMC thickness. The PCB-side IMC was generally thicker than …
-
Electroplated multi-path compliant copper interconnects for flip-chip packages
… the die to prevent the cohesive cracking and the interfacial delamination of the dielectric material. Potential interconnect solutions that meet this challenge are MEMS-like compliant freestanding micro-structures. These structures are designed to work as spring-like elements which allow the free …
-
Effect of temperature and humidity conditioning on mold compound/copper interfacial fracture and the associated cohesive zone models
… structures made of dissimilar materials. Interfacial delamination is a common failure mechanism present in microelectronic packages due to the mismatch in the coefficient of thermal expansion (CTE) between different materials. Epoxy Mold Compound (EMC) on a copper leadframe is a common …
-
Design and analysis for roll-to-roll graphene transfer
… and the recently reported R2R electrochemical delamination method. The process parameters for R2R dry peeling were investigated in detail, and their individual effects on transferred graphene quality were quantified for process optimization. The success of R2R graphene dry peeling is dependent …
-
Degradation and Failure Analysis of Environmental Barrier Coatings under Adverse Operating Environment: Multi-Physics Modelling
… The premature failure of EBCs, particularly delamination along the interfaces of thermally grown oxide (TGO) poses major challenges to coating reliability. This research presents a systematic study of the degradation of bi-layer Yb₂Si₂O₇/Si EBCs using COMSOL Multiphysics methodologies. …
Page 1 of 2