Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 101 for “"Interfacial Shear Strength"”.

  1. Evaluation of fiber-matrix interfacial shear strength in fiber reinforced plastics

    … fibers were shown to change the fiber tensile strength markedly. Filament wound unidirectional composites were tested in short beam "shear." Corresponding samples were fabricated by embedding one to seven fibers in the center of polymer dogbone specimens that were tested in tension to determine …

    vt Repository record for Evaluation of fiber-matrix interfacial shear strength in fiber reinforced plastics (opens in a new tab)

  2. The Use of Nanonindentation to Determine Composite Interfacial Shear Strength and the Effects of Environmental Aging

    … be ascertained from a micromechanical test for interfacial shear strength (IFSS) on as-processed materials. The accomplishment of this goal would create more information with fewer experiments and a need for less experimental materials. In this study, a nanoindenter uniquely outfitted with a …

    vt Repository record for The Use of Nanonindentation to Determine Composite Interfacial Shear Strength and the Effects of Environmental Aging (opens in a new tab)

  3. Development of Micro and Nanostructured Materials for Interfacial Self -Healing

    … are used to test virgin and healed fiber-matrix interfacial shear strength. When damage initiates at the fiber-matrix interface, the attached capsules rupture, and healing agent is released into the crack plane where it contacts the Grubbs' catalyst to initiate polymerization. Up to 44% recovery …

    uiuc Repository record for Development of Micro and Nanostructured Materials for Interfacial Self -Healing (opens in a new tab)

  4. An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase

    … acid salts were used. The transverse flexure strength was used to qualitatively rank the composites by level of interfacial shear strength. The longitudinal tensile strength of the composites was shown to vary with relative interfacial shear strength. The trend of these data qualitatively …

    vt Repository record for An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase (opens in a new tab)

  5. Indentation testing of composite materials: a novel approach to measuring interfacial characteristics and engineering properties

    … was developed as an attempt to evaluate the interfacial shear strength at a mesolevel, possibly overcoming the deficiencies of present techniques. Vickers Microhardness Testing and Continuous Ball Indentation Testing (CBIT) of composite materials provided data for assessing the sensitivity of …

    vt Repository record for Indentation testing of composite materials: a novel approach to measuring interfacial characteristics and engineering properties (opens in a new tab)

  6. An investigation of the interfacial characteristics of nitinol fibers in a thermoset composite

    … many material properties, including the interfacial shear strength between the embedded sensor or actuator and the matrix must be thoroughly understood.. Investigations were performed in order to examine the effects of different variables on the interfacial characteristics between a …

    vt Repository record for An investigation of the interfacial characteristics of nitinol fibers in a thermoset composite (opens in a new tab)

  7. Development of Lignin Carbon Fiber and Reinforced Composites

    … testing of single lignin carbon fiber (LCF), interfacial shear strength determination for LCF-resin systems using single fiber fragmentation, x-ray diffraction for the evaluation of microstructural parameters, and finally composite manufacturing and testing. Through these focused areas of …

    ut-knoxville Repository record for Development of Lignin Carbon Fiber and Reinforced Composites (opens in a new tab)

  8. A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites

    The mechanical characterization of the interfacial shear strength (IFSS) of carbon nanotube (CNT) coated carbon fibers and the interlaminar fracture toughness of woven fabric carbon fiber/epoxy composites toughened with CNT/epoxy interleave films is presented. The deposition of multiwalled carbon …

    tamu Repository record for A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites (opens in a new tab)

  9. EFFECT OF CERIUM AND MAGNESIUM ADDITIONS ON THE STRENGTH AND MORPHOLOGY OF THE INTERMETALLIC COMPOUND LAYERS IN ALUMINUM-STEEL DISSIMILAR CASTINGS

    … steel core and a poured aluminum component. The strength and integrity of the casting relies on the coherency of the bond between the two components; by optimizing the metallurgical component of the bonding phenomena, the weight and complexity of the insert can be reduced, further increasing the …

    mtu Repository record for EFFECT OF CERIUM AND MAGNESIUM ADDITIONS ON THE STRENGTH AND MORPHOLOGY OF THE INTERMETALLIC COMPOUND LAYERS IN ALUMINUM-STEEL DISSIMILAR CASTINGS (opens in a new tab)

  10. The effects of alkali and graphene oxide modifications on the mechanical performance of flax-epoxy composites

    … the drawback of lower compatibility and reduced interfacial properties with the polymer matrices, which have detrimental effects on composite behavior. To alleviate this, improvements are seen in natural fiber composite material properties following surface treatment methods such as NaOH and …

    ubc Repository record for The effects of alkali and graphene oxide modifications on the mechanical performance of flax-epoxy composites (opens in a new tab) Download PDF for The effects of alkali and graphene oxide modifications on the mechanical performance of flax-epoxy composites (opens in a new tab)

  11. The measurement of adhesion at film-substrate interfaces using a constant depth scratch test

    … a constant depth scratch test, the interfaces shear strength of various thin film/substrate interfaces can be determined. The ability to quantitatively ascertain when thin film debonding occurs has become especially important in the fields of electronics, optics, and protective coatings. A new …

    nps Repository record for The measurement of adhesion at film-substrate interfaces using a constant depth scratch test (opens in a new tab)

  12. Investigation of the mechanical performance of natural fibres and their composites

    … have been characterised. Furthermore, the interfacial interaction of coir fibre with polypropylene (PP) and low density polyethylene (LDPE) was investigated. In addition, the mechanical performance of injection moulded coir reinforced PP and LDPE composites was analysed. The complex …

    strathclyde Repository record for Investigation of the mechanical performance of natural fibres and their composites (opens in a new tab)

  13. Effect of hot water fibre treatment on the properties of kenaf/polyester composites

    … greatest for the 100˚C treatment. The tensile strength of single technical fibres was 182-245 MPa, the Young’s modulus was 13.0-19.2 GPa while the strain to failure was 1.3-1.4%. Because of the wide scatter in the data, no significant differences were detected between the different treatments …

    unsw Repository record for Effect of hot water fibre treatment on the properties of kenaf/polyester composites (opens in a new tab)

  14. Local and Effective Mechanical Properties of Polymer Nanocomposites

    … epoxy. In this regard, local information of the interfacial properties of embedded nanoparticles can be the key in developing calibrated hierarchical damage models. To this effect, a new methodology was developed to quantify the average interfacial shear strength (IFSS) of individual vapor grown …

    uiuc Repository record for Local and Effective Mechanical Properties of Polymer Nanocomposites (opens in a new tab)

  15. Solid Lubrication Mechanisms in Laser Deposited Nickel-titanium-carbon Metal Matrix Composites

    … is due to the in-situ formation of a low interfacial shear strength amorphous carbon tribofilm that is extruded to the surface via refined Ni grain boundaries.

    unt Repository record for Solid Lubrication Mechanisms in Laser Deposited Nickel-titanium-carbon Metal Matrix Composites (opens in a new tab)

  16. Atomic Layer Deposition Seeded ZnO Nanowires in Hybrid Carbon Fiber Composites: Synthesis, Characterization and Multifunctionality

    Interfacial treatments of carbon fiber composites play a critical role in determining the overall performance as the surface of carbon fiber is smooth and inert causing low bonding to the polymer matrix. In this dissertation, atomic layer deposition (ALD) seeded ZnO nanowires were grown on carbon …

    oklahoma-thes Repository record for Atomic Layer Deposition Seeded ZnO Nanowires in Hybrid Carbon Fiber Composites: Synthesis, Characterization and Multifunctionality (opens in a new tab) Restricted access

  17. The Effects of Graphene Size and Morphology on Damping Properties of Polymer Nanocomposites

    … with graphene inclusions by employing interfacial slippage mechanisms between filler and matrix. The damping improvement to the nanocomposite benefits from the large interfaces of the matrix-graphene or graphene layers between which frictional sliding occurs to dampen vibration. In …

    tamu Repository record for The Effects of Graphene Size and Morphology on Damping Properties of Polymer Nanocomposites (opens in a new tab)

  18. Controlling the Wettability and Adhesion of Carbon Fibers with Polymer Interfaces via Grafted Nanofibers

    Interfacial properties in carbon fiber composites is one of the key parameters controlling their structural functionality. Here, we introduce a novel method to engineering carbon fiber-epoxy interfaces, via inclusion of nanofibers, towards higher interfacial strength and energy dissipation. In our …

    tamu Repository record for Controlling the Wettability and Adhesion of Carbon Fibers with Polymer Interfaces via Grafted Nanofibers (opens in a new tab)

  19. Interfacial Bonding of Carbon/Geopolymer Composite: Insights into the Effect of Fiber Surface Modification and Geopolymer Water Content

    … This study aims to provide insights into the interfacial bonding between carbon fabric and geopolymer by exploring the effects of fiber surface modification with zinc oxide nanorods and variations in geopolymer water content. The zinc oxide nanorods coating was applied to the carbon fibers …

    cornell Repository record for Interfacial Bonding of Carbon/Geopolymer Composite: Insights into the Effect of Fiber Surface Modification and Geopolymer Water Content (opens in a new tab)

Page 1 of 6