Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Interfacial flow"”.
-
Numerical Study of Interfacial Flow using Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) Method
Solving interfacial flows numerically has been a challenge due to the lack of sharpness and the presence of spurious currents at the interface. Two methods, Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) method and Ghost Fluid Method (GFM) have been developed in the finite volume framework …
-
Flow through and over model porous media with or without inertial effects
… research program was designed to study laminar flows through and over models of porous media with or without inertial effects. The models used were made up of circular or square rods arranged to cover solid volume fraction ϕ ranging from 0.03 to 0.49, and filling fraction h / H ranging from 0.34 …
-
Experimental and Numerical Study of the Convective Mass Transfer of Solvent in Expanding Solvent-SAGD
… by gravity-driven convection exists in the interfacial flow both in the experiment and reservoir-scale simulation model, which is in contrast with previous studies. Experimental results show that the transverse movement of solvent increases with higher permeability and decreases with higher …
-
Transient simulation of non-Newtonian coextrusion flows in complex geometrics
… of problems exist in the coextrusion process; interfacial flow instability and non-uniform layer thickness distribution. Non-uniform layer distribution refers to the change in thickness of the distribution of the layers across the width of the sheet. Interfacial flow instability appears as an …
-
A Consistent Numerical Method for Simulating Interfacial Turbulent Flows
… consistent algorithm for simulating interfacial turbulent flows is devised in this work. To minimize numerical errors for imposing dynamic boundary conditions at the interface locations, piezometric pressure is used to limit the effect of gravity forces in a flow field. Consequently, …
-
Numerical Investigation of the Rayleigh-Taylor Instability Under Various Time-Dependent Acceleration Profile
The dynamic properties of an interfacial flow between heavy and light incompressible fluids that are initially Rayleigh-Taylor unstable and are subjected to an external acceleration vector field that is orthogonal to the density gradient are studied. Most instances of Rayleigh-Taylor instability …
-
Energy equations for gas-liquid turbulent flows with phase change
… of turbulence kinetic energy (TKE), mean-flow kinetic energy (MFKE) and mean internal energy (MIE) for gas-liquid interfacial flows with phase change for the first time. We present the equations for a fully compressible flow in gas or liquid phase which allows us to study the effects of …
-
Numerical modeling for mesh-independent simulations of spray atomization
Multiphase flows involving fluid-fluid interfaces with surface tension underlie many processes of scientific and industrial importance. A major challenge associated with the numerical modeling of these flows comes from their multi-scale behavior, where coexisting drops, bubbles, and films can vary …
-
Bacteria as active colloids at fluid interfaces
… as yet largely untapped degrees of freedom to interfacial engineering. The ability to design interfaces to incorporate self-propelled colloids as truly active surface elements relies on understanding how interfaces constrain swimming and modulate colloidal interactions. Bacteria and reactive …
-
Finite Element Simulation of Interfacial Flows on Unstructured Meshes using a Second-order Accurate VOF Method
… first part a two-dimensional numerical model of interfacial flow phenomena has been developed, consisting of a finite element discretization of the time-dependent Navier-Stokes equations for immiscible, Newtonian, laminar, isothermal incompressible flows, with a volume-of-fluid (VOF) technique …
-
Interfacial dynamics in complex fluids : studies of drop and free-surface deformation in polymer solutions
Interfacial flows in complex fluids are an important subject, scientifically rich and technologically important. The main scientific attraction comes from the fact that the microstructure of the bulk fluids may evolve during interfacial flow, and thereby generating non-Newtonian stresses that act …
-
Applications of Irreversible Thermodynamics: Bulk and Interfacial Electronic, Ionic, Magnetic, and Thermal Transport
… particularly useful for describing macroscopic flow of system components, whether conserved (e.g., particle number) or non-conserved (e.g., spin). We give a general introduction to this toolset and calculate the entropy production due to bulk and interfacial flow. We compare the entropy …
-
Surface Energy Powered Processes upon Drop Coalescence
… to the jumping motion. Using three-dimensional interfacial flow simulations that are experimentally validated, we elucidate the mechanism of low energy conversion efficiency. The non-wetting substrate interferes with the expanding liquid bridge between the coalescing drops at a relatively late …
-
Flow Mechanisms and Transient Pressure Analysis Study For Multi-Stage Fractured Horizontal Wells In Shale Gas Reservoirs
… in the seepage model, especially in the linear flow model, is rarely given. Comprehensive consideration of adsorption, desorption and diffusion, using computer programming knowledge, such as shale gas reservoir fracturing horizontal well trilinear flow and five linear flow model, to research the …
-
Numerical Analysis of High-speed Droplet Impingement on Elastic and Rigid Substrates
… of the present work. In order to model the interfacial flow in the fluid region, which contains liquid and gas phases, Volume of Fluid (VOF) method is utilized. The droplet deformation is precisely captured upon impact with impingement velocities from 50 up to 500 m/s. An incompressible …
-
COMPUTATIONAL STUDIES OF FILM CONDENSATION, BOILING AND EQUILIBRIUM SHAPE OF A LIQUID FILM SUBJECTED TO THERMOCAPILLARITY
… direct numerical simulations (DNS) of three interfacial flow phenomena: thermocapillary-driven film deformation (without phase change), film condensation on a horizontal plate, and film boiling on a heated surface. The conservation equations are formulated using the “one-fluid” approach, …
-
Water Entry Cavity Dynamics
When a sphere or a stream of water hits the surface of a pool of water and enters a crater or air cavity often forms. This topic has been studied, both formally and informally, for a long time. This dissertation investigates four areas of water impact that are still poorly understood using …
-
Convergence of the boundary integral method for interfacial stokes flow
… methods are among the most accurate methods for interfacial Stokes flow, and are widely applied. They have the advantage that only the boundary of the domain must be discretized, which reduces the number of discretization points and allows the treatment of complicated interfaces. Despite their …
-
Instabilities in newtonian films and nematic liquid crystal droplets
The instabilities of Newtonian films and nematic liquid crystal droplets within the framework of the long wave (lubrication) approximation are studied. For Newtonian films, it is found that, under destabilizing gravitational force, a contact line, modeled by a commonly used precursor film model, …
-
An efficient boundary integral method for stiff fluid interface problems
… three dimensions. A mathematical model of this interfacial flow problem in 3D is derived. The motion of the interface and fluids is driven by the action of a gravity force, surface tension at the interface, elastic bending and/or a prescribed far-field pressure gradient. The presented models …
Page 1 of 2