Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"Interfacial forces"”.

  1. Interfacial forces in chemical-mechanical polishing

    … slurry. This synergetic process involves several forces in multi-length scales and multi-mechanisms. This research contributes fundamental understanding of surface and interface sciences of microelectronic materials with three major objectives. In order to extend the industrial impact of this …

    tamu Repository record for Interfacial forces in chemical-mechanical polishing (opens in a new tab)

  2. Interfacial forces in nanocellulose based composite materials

    … In the second, the approach focuses on the interfacial interactionbetween NFC and polymers (polysaccharides) to assess the importance of their mutual interplay on the mechanical performance of the nanocomposite films. Atomic force microscopy(AFM) in different imaging conditions (liquid and …

    aalto Repository record for Interfacial forces in nanocellulose based composite materials (opens in a new tab)

  3. Fundamental Studies of Interfacial Forces Acting on Thin Films

    A thin film is a material that is many orders of magnitude thinner than it is long or wide. They are commonly found in many forms and have been adapted to a wide variety of uses. The art of origami uses thin films(sheets of paper) and precise folding to create complex, three-dimensional shapes out …

    ndsu Repository record for Fundamental Studies of Interfacial Forces Acting on Thin Films (opens in a new tab)

  4. Interfacial Forces of 2D Materials at the Oil–Water Interface

    … underlying the exfoliation process at the interfacial level. By combining the results seen across these two length scales, our results significantly enhance the understanding of this novel exfoliation process. Additionally, we examine the interactions between another 2D material, mica, and …

    wm-mary Repository record for Interfacial Forces of 2D Materials at the Oil–Water Interface (opens in a new tab)

  5. Ferroelectric Thin Films for the Manipulation of Interfacial Forces in Aqueous Environments

    … new platform for advancing liquid-phase interfacial sensing devices. FETFs are capable of expressing surface charge densities that are an order of magnitude higher than those of traditional charged surfaces in liquid environments (e.g., common oxides, self-assembled monolayers, or …

    duke Repository record for Ferroelectric Thin Films for the Manipulation of Interfacial Forces in Aqueous Environments (opens in a new tab)

  6. Dewetting Dynamics of Heavy Crude Oil: Contributions from Surface and Interfacial Forces

    … surfactants and thus decreased the oil-water interfacial tension (σ_OW), promoting increased oil droplet dewetting (equilibrium contact angle (θ) decreased from 63.7° to 51.3°), with the effect described by the Young’s equation. At high pressure (200 bar at 140 °C), asphaltenes partition less …

    whiterose Download PDF for Dewetting Dynamics of Heavy Crude Oil: Contributions from Surface and Interfacial Forces (opens in a new tab)

  7. Physical and computation modelling of turbidity currents: the role of turbulence-particles interactions and interfacial forces

    Experimental and numerical investigations have been conducted in order to evaluate the accuracy of the Mixture Model, a depth-resolved and time-averaged multiphase numerical model, in predicting the behaviour of dilute surge-type turbidity currents. The effects of turbulent dispersion and …

    whiterose Download PDF for Physical and computation modelling of turbidity currents: the role of turbulence-particles interactions and interfacial forces (opens in a new tab)

  8. Analysis of interfacial forces on the physics of two-phase flow and hyperbolicity of the two-fluid model

    … and mathematical solutions. The physical forces that we will focus on are two interfacial forces: the interfacial pressure and the virtual mass. We will quantify the minimum correction that is necessary to ensure hyperbolicity of the two-fluid model. We will then compare the two forces and …

    uiuc Repository record for Analysis of interfacial forces on the physics of two-phase flow and hyperbolicity of the two-fluid model (opens in a new tab)

  9. Surface integral equation based derivation and algorithm for simulating vesicle flows in three dimensions, A

    … the evolution of the vesicle membrane to the interfacial forces. Variational techniques are applied to derive an exact form for the interfacial forces on the vesicle. A super algebraic algorithm is presented to numerically evaluate weakly singular integrals which arise in the development of …

    colo-mines Repository record for Surface integral equation based derivation and algorithm for simulating vesicle flows in three dimensions, A (opens in a new tab)

  10. Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite

    … extent of microcracking which is governed by the forces at the fiber/matrix interface. Since the fiber coating provides a means for regulating the interfacial forces, it controls the failure mechanisms, and therefore, the mechanical properties through moderation of the interfacial forces.</p>

    ut-knoxville Repository record for Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite (opens in a new tab)

  11. Modeling of melt pool thermal behavior in laser material

    … melt pool dynamics is primarily driven by the interfacial forces, which in turn rely considerably on the melt pool geometry, a free surface tracking method associated with the numerical implementation scheme is proposed. The dissertation investigates the melt pool evolution process and analyzes …

    must-thes Repository record for Modeling of melt pool thermal behavior in laser material (opens in a new tab)

  12. Numerical Study of Interfacial Flow using Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) Method

    Solving interfacial flows numerically has been a challenge due to the lack of sharpness and the presence of spurious currents at the interface. Two methods, Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) method and Ghost Fluid Method (GFM) have been developed in the finite volume framework …

    ucf Repository record for Numerical Study of Interfacial Flow using Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) Method (opens in a new tab)

  13. Geochemical effects in two-phase flow

    … that takes into account capillary pressure and interfacial forces. For gas injection, a traveling wave solution has been adopted with a correction proposed to honor the material balance. The traveling wave solutions were tested against results from the compositional simulator Generalized …

    texas Repository record for Geochemical effects in two-phase flow (opens in a new tab)

  14. INTERFACIAL STRUCTURE AND DYNAMICS OF NEMATIC 4-n-PENTYL-4'-CYANOBIPHENYL LIQUID CRYSTALS ON SILVER, SILICA AND MODIFIED SILICA SUBSTRATES

    … novel experimental approach helps to investigate interfacial species by minimizing the interference of the bulk liquid when coupled with spectroscopy. In this work, the scope of liquids investigating using this approach has been expanded from simple fluids to one type of complex fluid, a nematic …

    arizona-thes Repository record for INTERFACIAL STRUCTURE AND DYNAMICS OF NEMATIC 4-n-PENTYL-4'-CYANOBIPHENYL LIQUID CRYSTALS ON SILVER, SILICA AND MODIFIED SILICA SUBSTRATES (opens in a new tab)

  15. Nanomechanics, Nanotribology and Surface Interactions of Ultra Thin Films

    … model was developed in this research to predict interfacial forces at different environmental conditions and the model was extended to a rough surface contact model to predict interfacial forces between the fingertip and the haptics surface over a finite region.

    tamu Repository record for Nanomechanics, Nanotribology and Surface Interactions of Ultra Thin Films (opens in a new tab)

  16. CFD modelling of Liquid-Liquid Slug Flow in Capillaries for Biodiesel Production

    … the droplet velocity. Moreover, the study of the interfacial forces in the limits of high and low viscosity ratios was developed using an alternative method to the Volume-of-Fluid method. The velocity and shear profiles across the two-phases were efficiently achieved and visualisations of the …

    whiterose Download PDF for CFD modelling of Liquid-Liquid Slug Flow in Capillaries for Biodiesel Production (opens in a new tab)

  17. Characterization and control of the fiber-matrix interface in ceramic matrix composites

    <p>The fiber-matrix interfacial forces in a composite strongly influence the strength and fracture behavior of the material. A weakly bonded interface leads to a low matrix fracture stress and low ultimate strength. As the composite is stressed, load is not transferred from the matrix to the …

    ut-knoxville Repository record for Characterization and control of the fiber-matrix interface in ceramic matrix composites (opens in a new tab)

  18. Mechanical properties of soft interfaces.

    … (MEMs) and implantable biomedical devices, interfacial forces (friction and adhesions) responsible for device failure are a major concern. Molecular films as thin as a monolayer are being actively explored to reduce adhesion and friction. However, many questions remain about the tribological …

    umn Repository record for Mechanical properties of soft interfaces. (opens in a new tab)

Page 1 of 3