Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 244 for “"Interfacial layer"”.

  1. STUDY OF CATHODE INTERFACIAL LAYER FOR HIGHLY EFFICIENT INVERTED ORGANIC SOLAR CELLS

    … nature of electrical contact between the active layer and cathode in inverted OSCs has significant effects on the device performance, thus modification of those interfaces by inserting appreciate interfacial layers can optimize the contact properties to improve the device performance. The purpose …

    nus Repository record for STUDY OF CATHODE INTERFACIAL LAYER FOR HIGHLY EFFICIENT INVERTED ORGANIC SOLAR CELLS (opens in a new tab) Download file for STUDY OF CATHODE INTERFACIAL LAYER FOR HIGHLY EFFICIENT INVERTED ORGANIC SOLAR CELLS (opens in a new tab)

  2. Characterization of Electrodeposited Chitosan: an Interfacial Layer for Bio-assembly and Sensing

    Microfluidics and Lab-on-a-Chip devices have revolutionized the field of analytical biology. To fully optimize the potential of the microfluidic environment it is critical to be able to isolate reactions in specific locations within a channel. One solution is found using chitosan, an amine-rich …

    maryland Repository record for Characterization of Electrodeposited Chitosan: an Interfacial Layer for Bio-assembly and Sensing (opens in a new tab)

  3. TEM Study of a RTO Oxide-Interfacial Layer on Epitaxial-Cobalt Silicide (CoSi2) Formation

    … thermal stability, low stress state and interfacial uniformity with the silicon substrate. Recently, there has been many studies to investigate the growth of epitaxial CoSi2 on Si using a interlayer material such as Ti (TIME) and SiOx (OME). In this project, transmission electron …

    nus Repository record for TEM Study of a RTO Oxide-Interfacial Layer on Epitaxial-Cobalt Silicide (CoSi2) Formation (opens in a new tab) Download file for TEM Study of a RTO Oxide-Interfacial Layer on Epitaxial-Cobalt Silicide (CoSi2) Formation (opens in a new tab)

  4. Formation And Growth Mechanisms of a High Temperature Interfacial Layer Between Al and TiO2

    … temperature and normal atmospheric pressure. The interfacial region between the reactant compounds is examined using analytical techniques; and the formation of TiAl as the interfacial compound is described. The thermodynamics of the Al – Ti – O system is explained as it relates to the particular …

    vt Repository record for Formation And Growth Mechanisms of a High Temperature Interfacial Layer Between Al and TiO2 (opens in a new tab)

  5. SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS

    … rapid formation of a thin Fe-Al intermetallic layer at the substrate-liquid interface, thereby inhibiting the formation of brittle Fe-Zn intermetallic compounds. On the other hand, Mn is essential for obtaining the desired microstructure and mechanical properties in advanced high strength …

    mcmaster Repository record for SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS (opens in a new tab)

  6. Atomic layer deposited beryllium oxide as a gate dielectric or interfacial Layer for Si and III-V MOS devices

    … such as low crystallization temperature, low k interfacial regrowth, charge trapping and so on. The integration of hafnium based high-k dielectric into CMOS technology is also limited by major issues such as degraded channel mobility and charge trapping. One approach to overcome these obstacles …

    texas Repository record for Atomic layer deposited beryllium oxide as a gate dielectric or interfacial Layer for Si and III-V MOS devices (opens in a new tab)

  7. Improving the Stability of High and Low Bandgap Polymers Organic Photovoltaic Devices Using a Solution Based Titanium Sub-Oxide Interfacial Layer

    … degradation of the morphology of the photoactive layer. To improve the lifetime and stability of the OPV devices, we used newly developed low bandgap polymer, PCDTBT, as the electron acceptor material and a solution based titanium sub-oxide (TiOx) interfacial layer inserted between the active …

    odu Repository record for Improving the Stability of High and Low Bandgap Polymers Organic Photovoltaic Devices Using a Solution Based Titanium Sub-Oxide Interfacial Layer (opens in a new tab)

  8. II-VI Type-II Quantum Dot Superlattices for Novel Applications

    … results obtained for epitaxially grown submonolayer type-II quantum dot superlattices made of II-VI semiconductors. We have investigated the spin dynamics of ZnSe layers with embedded type-II ZnTe quantum dots and the use of (Zn)CdTe/ZnCdSe QDs for intermediate band solar cell (IBSC). Samples …

    cuny-grad Repository record for II-VI Type-II Quantum Dot Superlattices for Novel Applications (opens in a new tab)

  9. Enhancing the Performance of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using an Interface Engineering Method

    … of the fabrication process in keeping the interfacial layers free from contamination, as well as the proper annealing of the P3HT. An interface engineering method is investigated to further enhance the performance of the OTFTs. Three interfacial materials were used for this purpose: …

    clemson Repository record for Enhancing the Performance of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using an Interface Engineering Method (opens in a new tab)

  10. A Triaxiality-Dependent Constitutive Model For Predicting Damage-Induced Softening in 3D-Printed Soft Suture Layer

    Adhesive interfacial layers are ubiquitous in both engineering and natural material systems. They are essential in governing the mechanical behaviors of these materials. Especially, in the field of biological and bio-inspired materials, soft interfacial layer plays very important role in mechanics …

    unh-thes Repository record for A Triaxiality-Dependent Constitutive Model For Predicting Damage-Induced Softening in 3D-Printed Soft Suture Layer (opens in a new tab)

  11. MORPHOLOGY EVOLUTION CONTROL IN FLUORENE-BASED SEMICONDUCTOR HETEROJUNCTIONS BY SPECTATOR IONS AND INTERFACE-MODULATING PHASES

    … their excellent charge carrier mobilities. As an interfacial layer, conjugated polyelectrolyte (CPE) F(NSO3)2 was reported to further improve charge carrier separation properties of model optoelectronic devices, due to the existing internal dipole moment. Molecular dynamics (MD) simulations were …

    nus Repository record for MORPHOLOGY EVOLUTION CONTROL IN FLUORENE-BASED SEMICONDUCTOR HETEROJUNCTIONS BY SPECTATOR IONS AND INTERFACE-MODULATING PHASES (opens in a new tab) Download file for MORPHOLOGY EVOLUTION CONTROL IN FLUORENE-BASED SEMICONDUCTOR HETEROJUNCTIONS BY SPECTATOR IONS AND INTERFACE-MODULATING PHASES (opens in a new tab)

  12. Comparison of a-Fe2O3 electrodes grown by direct plasma and thermal oxidation of iron for photoelectrochemical water splitting.

    … to the presence of a large (7.5 µm) mixed-phase interfacial layer in the latter, wherein the charge carriers are lost to recombination. Due to the fast growth process in plasma oxidation, the interfacial layer is much thinner (1 µm) and may in fact contain only hematite, rather than a mixed …

    louisville Repository record for Comparison of a-Fe2O3 electrodes grown by direct plasma and thermal oxidation of iron for photoelectrochemical water splitting. (opens in a new tab)

  13. High-K MOSFETS with high mobility channels

    … surface channel for pMOSFET. A high-??/I?-SiGe interfacial layer contains GeOx if the dielectrics are deposited on I?-SiGe directly, whereas the interfacial layer contains no GeOx but SiNxOy if a nitridation treatment is performed on I?-SiGe prior to the dielectrics deposition. The nitridation …

    nus Repository record for High-K MOSFETS with high mobility channels (opens in a new tab) Download file for High-K MOSFETS with high mobility channels (opens in a new tab)

  14. Surface tracking in the inter-phase region of large transformers

    … The experiments have revealed the role of the interfacial layer in the transport of charge across the surface of the oil-pressboard interface. It is found that the interaction between the electric fields from adjacent voltage coils enhances the polarisation of the interfacial layer at the …

    soton Download PDF for Surface tracking in the inter-phase region of large transformers (opens in a new tab)

  15. The theory of the Schottky barrier solar cell

    … Schottky barrier solar cells with an insulating layer is described, which takes into account more accurately than has been done so far, the dependence of the barrier height on the density of interfacial states (D S) and consequently the various potential drops in the cell. Also taken into account …

    soton Download PDF for The theory of the Schottky barrier solar cell (opens in a new tab)

  16. Coarse-grained simulations to predict structure and properties of polymer nanocomposites

    … class of materials characterized by their large interfacial areas between the host polymer and nanofiller. This unique feature, due to the size of the nanofiller, is understood to be the cause of enhanced mechanical, electrical, optical, and barrier properties observed of PNCs, relative to the …

    texas Repository record for Coarse-grained simulations to predict structure and properties of polymer nanocomposites (opens in a new tab)

  17. Analysis of Hysteresis in Poly(3-Hexylthiophene) Based Organic Thin Film Transistors With and Without Interfacial Layers and Effects of Ion Irradiation on Poly(3-Hexylthiophene) Transistors

    … thin film transistors (OTFT) with and without interfacial layers. We are also investigating how electrical characteristics of P3HT OTFTs is affected by irradiation with Ar8+ ions. Hysteresis is an undesired phenomenon that affects transistor reliability and performance. In this study on OTFTs, …

    clemson Repository record for Analysis of Hysteresis in Poly(3-Hexylthiophene) Based Organic Thin Film Transistors With and Without Interfacial Layers and Effects of Ion Irradiation on Poly(3-Hexylthiophene) Transistors (opens in a new tab)

  18. Characterization of hematite nanowire arrays synthesized by atmospheric plasma.

    … photoactivity due to the presence of a thin interfacial layer and oxygen vacancy planes throughout the sample. Unfortunately, due to the nature of vacuum systems, this process would be difficult to scale-up and as such atmospheric plasma synthesis was explored. Photoactive hematite nanowire …

    louisville Repository record for Characterization of hematite nanowire arrays synthesized by atmospheric plasma. (opens in a new tab)

  19. Application of High-k Dielectric to Non-Volatile Memory Devices

    … materials for the interpoly dielectric (IPD) layer in future floating gate flash memory devices. A systematic study of leakage current through the IPD layer was conducted using the MEDICI simulator. Various high-? dielectrics were studied for their feasibility of being used as IPD. Simulation …

    nus Repository record for Application of High-k Dielectric to Non-Volatile Memory Devices (opens in a new tab) Download file for Application of High-k Dielectric to Non-Volatile Memory Devices (opens in a new tab)

Page 1 of 13