Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Interfacial oxide"”.
-
An Investigation of the Effects of Series Resistance on the Performance of MIS Solar Cells
… performance and that voltage drops across the interfacial oxide were important. After accounting for voltage drops across the oxide, agreement between computer-calculated and experimental current- voltage characteristics was very satisfactory. Consequently, it was concluded that interfacial …
-
Poly-si based passivating contacts for high-efficiency silicon solar cells
… Si solar cells, the con-cept of a tunnel-oxide passivating contact (TOPCon) was first introduced by Feldmann et al. in 2013 based on the development of bipolar junction transistor (BJT) in the field of microelectronics in the 1980ies. TOPCon consists of an ultra-thin interfacial oxide SiOx …
-
Surface and interfacial chemistry of high-k dielectric and interconnect materials on silicon
… and X-ray photoelectron spectroscopy (XPS). An interfacial reaction between Ba and Sr atoms and SiOxNy was found to create silicates, BaSixOy or SrSixOy. Inclusion of N in the interfacial oxide decreased silicate formation in both Ba and Sr systems. Furthermore, inclusion of N in the interfacial …
-
Transmission electron microscope studies of emitters of silicon bipolar transistors
… jtative interpretation of the break-up of the interfacial oxide layers observed in these samples.</p> <p>The effect of annealing the samples prior to emitter dopant implantation (pre-annealing) is investigated for phosphorus and arsenic doped samples, implanted into a polysilicon layer 0.4μm …
-
DEVELOPMENT OF MULTILAYERED THERMAL BARRIER COATINGS FOR HYDROGEN TURBINES
… the coating and accelerate the growth of the interfacial oxide layer, which ultimately triggers substrate spallation. This dissertation systematically investigates multilayer architectures incorporating alumina layers to enhance moisture resistance. Experimental results demonstrate that …
-
Microelectronic applications of the conductor-thin insulator-semiconductor (CIS) structure
… scheme is implemented, a good quality interfacial oxide is shown to have an essential role in device operation. The shallow junction depth of the minority carrier CIS structures has been used to advantage by replacing the normally diffused source and drain regions of a MOSFET with such …
-
NOISE CHARACTERIZATION OF POLYSILICON EMITTER BIPOLAR TRANSISTORS
… out on two classes of devices, one having an interfacial oxide layer at the interface and the other without having an oxide layer at the interface. The coherence measurements on these devices revealed that the oxide layer at the interface plays an important role in the noise characteristics of …
-
Laser-assisted Localisation of Polysilicon Contact for High-efficiency Silicon Solar Cells
… and Rear Cell (PERC). Localised polysilicon-on-oxide contacts (LPC) can be a viable upgrade to LDSE on the front side since, compared to LDSE, LPC has a lower metallised recombination current density (J0;metal) while maintaining a similar level of contact resistivity when contacting with silver. …
-
Low-Frequency Noise in SiGe HBTs and Lateral BJTs
… SiGe HBTs includes investigating the effects of interfacial oxide (IFO), temperature, geometrical dimensions, and proton radiation. It also includes utilizing physical models to probe noise mechanisms. The research in the LFN of lateral BJTs includes exploring the effects of doping and …
-
Multi-scale modelling and experimental analysis of ALD alumina: interplay of process dynamics, chemistry and interfacial phenomena
… initial island growth and the formation of an interfacial oxide layer are two of its main limitations, especially for the case of metal oxide ALD on Si. Moreover, the deposition on large area wafers is not always uniform, and depends on the reactor and process design. These drawbacks need to be …
-
MIS SINGLE CRYSTAL SILICON SCHOTTKY BARRIER SOLAR CELLS
… (A/R) materials; thicknesses of the interfacial insulator, Schottky metals and A/R coatings; active solar area; surface preparation and interfacial oxide formation techniques; deposition rate and vacuum condition. Also presented in this thesis are a systematic experimental …
-
Measurement of Ferroelectric Films in MFM and MFIS Structures
… for from the ~10% voltage drop across the interfacial oxide layer, indicating that the modified surface properties are impacting the formation of the ferroelectric phase during anneal. In light of this, care should be taken to map out ferroelectric HfO2 properties using the particular …
-
Characterization and modeling of low-frequency noise in Hf-based high -kappa dielectrics for future cmos applications
… the need for high-K dielectric based gate-oxide Metal Oxide Semiconductor Field Effect Transistors for sub-45 nm technology nodes. Gate oxides of hafnium seem to be the nearest and best alternative for silicon dioxide, when material, thermal and structural properties are considered. Usage …
-
Nanostructure and Optoelectronic Phenomena in Germanium-Transparent Conductive Oxide (Ge:TCO) Composites
… Ge embedded in transparent conductive indium tin oxide (ITO) as well as Ge in zinc oxide (ZnO) were produced by a single step RF-magnetron sputter deposition process.It is shown that, by controlling the design of the nanocomposites as well as heat treatment conditions, decreases in the physical …
-
Ion-beam analysis of optical coatings.
… first direct experimental verification of the interfacial oxide layer responsible for the superior adhesion of aluminum to glass, and show that contrary to popular belief, the layer is not an artifact of oxygen adsorbed during the aluminum's evaporation. We then discuss the diffusion of copper …
-
Μελέτη διεπιφανειών οξειδίων με οργανικούς και ανόργανους ημιαγωγούς με φασματοσκοπίες φωτοηλεκτρονίων
… part of this thesis presents the study of high-k oxides (Al2O3 and HfO2) / Ge interfaces and structures with intermediate passivation layer, using X-ray photoelectron spectroscopy (XPS). The stoichiometry, the thickness of the films, the electronic structure were determined and the possible …
-
Polysilicon contacts for next-generation industrial silicon solar cells
… to synthesize the silicon films as well as the interfacial oxide films and the final hydrogenation step. With respect to silicon deposition, both plasma-enhanced chemical vapour deposition (PECVD) and physical vapour deposition (PVD) are investigated. The thickness and surface passivation …
-
Spectroscopic investigation of resistive switching mechanisms in pulsed laser deposited metal-oxide thin films
… incorporate resistive switching transition metal oxide thin films were studied using Electron Energy Loss Spectroscopy (EELS). Basic metal/oxide/metal RRAM heterostructures that incorporated strongly oxidising titanium electrodes and polycrystalline ZnO and manganese-doped ZnO were investigated in …
-
Spectroscopic characterisation of high dielectric constant materials on semiconducting surfaces
… substrates, an in-situ analysis of hafnium oxide grown by micro e-beam deposition in an oxygen atmosphere on an ultra-thin SiO2 buffer layer was carried out using XPS and synchrotron radiation. The self-limiting growth of an interfacial hafnium silicate layer was observed and the substrate …
-
The effects of silicon, nitrogen and oxygen incorporation and oxygen-scavenging technique on performances of hafnium-based gate dielectric MOSFETs
… reducing dimensions of CMOS (complementary metal oxide semiconductor) technology. A higher number of transistors on chip resulting in faster speed and lower cost can be allowable by the scaling down and these fruitful achievements have been mainly made by the thinning thickness of one key …
Page 1 of 2