Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Intermediate strain rates"”.
-
AN APPARATUS FOR TENSILE CHARACTERIZATION OF THERMOPLASTICS AT INTERMEDIATE STRAIN RATES
… relatively soft and their material response at intermediate strain rates (1 - 100s-1), commonly experienced in automotive crashes, is not well-documented. The tendency of thermoplastics to undergo large deformations before yield and failure, places a limitation on the type of apparatus which can …
-
Experimental characterization of self-heating at intermediate strain rates for elastomers and evaluation of thermoelastic hyperelastic constitutive model
… phenomena of elastomers due to constant high strain rate loading is characterized by a comprehensive experimental method. The experimentally observed material behavior is later predicted by numerical simulation using a modified thermo-elastic hyperelastic material model. To achieve the …
-
Experimental methods for evaluating strain rate dependency of shape memory alloy materials under quasistatic and impulsive loading
… re-centering ability to structures. The stress-strain relations of SMAs are dependent on loading rates, and the responses of SMAs under intermediate strain rates are hard to obtain using conventional experimental techniques. This research developed an innovative high-loading-rate tensile testing …
-
Strain-rate Dependent Fracture Load Prediction of Lead-free Solder Joints
The critical strain energy release rate at crack initiation, Jci, has been shown to govern the fracture of short solder joints. The present work measured Jci for 2 mm long SAC305 solder joints as a function of the strain rate and phase angle using DCB specimens. A drop tester was designed and built …
-
FAILURE MECHANISMS OF ULTRA HIGH MOLAR MASS POLYETHYLENE SINGLE FIBERS AT EXTREME TEMPERATURES AND STRAIN-RATES
The effects of temperature and strain-rate on the mechanical properties of Ultra High Molar Mass Polyethylene (UHMMPE) single fibers was investigated at eleven temperatures from room temperature (20 °C) to the orthorhombic-hexagonal phase transition (148 °C) and at six strain-rates from …
-
Polymer-Particle Composite Material Failure Characterization in Quasistatic Compression and Dynamic Impact Regimes
… interfacial debonding, and crystal fracture. At intermediate strain rates (O 10−1000 s˄−1 ), these coupled phenomena influence the rate-dependent thresholds of damage and fracture. Current literature lacks sufficient experimental data at these intermediate rates for predictive deformation model …
-
Deformation enhanced grain growth in a superplastic Sn - 1% Bi alloy
… measured as a function of deformation time and strain over a wide range of strain rates. It was found that during deformation, considerable increases in the grain growth rates occurred when compared to static annealing. The effect was most pronounced at intermediate strain rates (≃10⁻²/minute) …
-
Localization and instability in sheared granular materials: role of friction and vibration
… Zone theory, to investigate the dynamics of strain localization and its connection to stability of sliding in sheared, dry, granular materials. We consider frictional and frictionless grains as well as presence and absence of acoustic vibrations. Our results suggest that at low and …
-
Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation
Two optical full-field strain measurement techniques, Digital Image Correlation and the Grid Method, are applied to characterise the strain-rate dependent constitutive behaviour of composite materials. Optical strain measurement techniques based on full-field images are well established for …
-
Temperature dependent dynamic response of open-cell polyurethane foams
… pads. These experiments were conducted under strain rates of 10$^2$ s$^{-1}$ and under temperature conditions ranging from -20 to 40\textdegree{C}. This temperature range was chosen to simulate desert and arctic conditions, with a strain rate regime chosen to represent loads that would occur …
-
Effects of Severe Plasticity and Additive Manufacturing Processes on High-Strength Materials
… temperatures of ambient, 900°C, and 1230°C and strain rates of 10-3 s-1 and 1 s-1. The x-ray diffraction results revealed an increasing body centered cubic (BCC) phase content with increasing aluminum content. To better understand the effects the severe plasticity would have on the HEA, …
-
Experimental Methods for Understanding the Performance of Impulsively Loaded Cross-Laminated Timber Panels
… the gap between the quasi-static and high strain rate loading regimes by investigating two areas that have remained unstudied or elusive, i.e., rolling shear failure of CLT under impulsive, blast-like loading and intermediate strain rates in CLT. A novel center-point testing system and …
-
Mechanism-based understanding of the plastic deformation of a magnesium alloy under multiaxial loading
… are first investigated over a wide range of strain rates (0.0001~10000 1/s) under uniaxial compression along different loading orientations relative to the material texture. We then enrich our dataset by escalating the strain rate to ~100000 1/s using the pressure-shear plate impact …
-
A New Crystal Plasticity-based Modeling of Damage Evolution in Advanced High Strength Steels under Varying Strain Rates, Temperatures, and Loading Conditions
… (AHSS) to predict damage evolution, stress-strain softening, and failure over a range of strain rates, temperatures, and loading conditions. A thermodynamically consistent rate-dependent formulation is first developed for HSLA steels. In this baseline model, crystallographic slip, …
-
Novel experimental split-Hopkinson techniques for characterising strain rate effects and thermomechanical behaviour
… to accurately characterise materials under high strain rate deformation, focusing particularly on thermomechanical effects. Conventional split Hopkinson methods have limitations when testing certain challenging materials such as low strength polymers, highly ductile metals, and materials with low …
-
Residual capacity of concrete subjected to impulsive loads
… frames. Existing test methods to investigate the strain rate dependent properties of concrete typically apply impulsive loads in such a magnitude that the concrete is fully damaged and has no residual capacity following the test. As such, little is known about how varying levels of damage imparted …