Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 256 for “"Intermediate temperature"”.

  1. Intermediate-Temperature Membrane-less H₂/O₂ Fuel Cells

    … cell system designed to operate under elevated temperatures (up to 120 °C) using a liquid electrolyte interposer. The cell employs two porous Pt/C electrodes and a circulating acid or alkaline electrolyte to conduct ions without a solid membrane. Room-temperature tests show superior performance …

    jhu Repository record for Intermediate-Temperature Membrane-less H₂/O₂ Fuel Cells (opens in a new tab) Embargoed until 2029-05-01

  2. Intermediate Temperature Fuel Cell Electric Vehicles: Simulation Study

    Low-temperature proton exchange membrane fuel cells (LT-PEMFC) operating at 60 – 80 ℃ have shown higher efficiency, and better integration with vehicle appli cations but face issues such as slow reaction rate, water flooding, and low thermal gradient with respect to surrounding. On the other hand, …

    chalmers Repository record for Intermediate Temperature Fuel Cell Electric Vehicles: Simulation Study (opens in a new tab)

  3. Multilayer membranes for intermediate temperature polymer electrolyte fuel cells

    IT-­PEFC operating at 120°C and not the usual 80°C has many advantages, such as faster chemical reactions. If the gas humidification is reduced, simpler and lighter humidifiers can be used, leading to a reduction in the fuel cell total cost. However, at this condition the current commercial …

    birmingham Download PDF for Multilayer membranes for intermediate temperature polymer electrolyte fuel cells (opens in a new tab)

  4. Composite proton exchange membranes for intermediate temperature fuel cells

    Intermediate temperature (IT) proton exchange membrane fuel cells (PEMFCs) offer a future that does not rely on the burning of fossil fuels, but dictate durable and high performance component materials. At operating conditions of 120 °C and 50 % relative humidity (RH), composite proton exchange …

    birmingham Download PDF for Composite proton exchange membranes for intermediate temperature fuel cells (opens in a new tab)

  5. Proton conductive ceramic materials for an intermediate temperature fuel cell

    Development of intermediate temperature (200-500°C) fuel cells could possibly overcome many disadvantages of both the high temperature (600-1000°C) solid oxide fuel cells (SOFC) and the low temperature (70-100°C) proton exchange membrane fuel cells (PEMFC) in terms of materials durability, cost, …

    ubc Repository record for Proton conductive ceramic materials for an intermediate temperature fuel cell (opens in a new tab) Download PDF for Proton conductive ceramic materials for an intermediate temperature fuel cell (opens in a new tab)

  6. Development of new materials for intermediate-temperature solid oxide fuel cells

    … work is the development of novel materials for intermediate-temperature solid oxide fuel cells (IT-SOFCs) with an aim of showing suitability and compatibility with fuel cell system environment. Fuel cell fabrication was briefly encountered to test appropriateness with existing fuel cell element …

    strathclyde Repository record for Development of new materials for intermediate-temperature solid oxide fuel cells (opens in a new tab)

  7. Perovskite-type Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

    … with an efficiency of 60 - 80%. However, the temperature of operation (800 - 1000 oC) reduces the lifetime and puts sever restrictions on the material available for use. Ideally SOFCs would need to operate at a more intermediate temperature (IT) range between (500 – 750 oC) to maintain their …

    calgary Repository record for Perovskite-type Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells (opens in a new tab)

  8. Mixed Conducting Composite Materials for Intermediate-Temperature Protonic Ceramic Fuel Cells

    … with high efficiency and low emission at intermediate temperatures. However, the sluggish oxygen reduction reaction (ORR) at the cathode side and the potential coking issue at the anode side are still the crucial stumbling stones to the further development of PCFCs. Utilizing materials …

    clemson Repository record for Mixed Conducting Composite Materials for Intermediate-Temperature Protonic Ceramic Fuel Cells (opens in a new tab)

  9. Manufacturing of intermediate-temperature solid oxide fuel cells using novel cathode compositions

    The development of intermediate temperatures solid oxide fuel cells (IT-SOFC) with YSZ electrolytes imposes a double requirement in their manufacturing. First, the electrolyte has to be kept as thin as possible to minimize ohmic polarization losses. Second, the cathode compositions used must …

    texas Repository record for Manufacturing of intermediate-temperature solid oxide fuel cells using novel cathode compositions (opens in a new tab)

  10. Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC)

    … high as 300 S*cm-1 in hydrogen, without any high temperature reduction. GDC electrolyte supported cell was fabricated with Sr0.2Na0.8Nb0.9V0.1O3 and the performance was measured in hydrogen and methane respectively. Due to vanadium’s intrinsic problems, the anode supported cell is not easy. Fe …

    maryland Repository record for Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) (opens in a new tab)

  11. Development of Zirconia-Based Mesoporous Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

    … fuel cells due to its high ionic conductivity at intermediate temperatures. Mesoporous 9 mol% Sc-ZrO2 powders for use in intermediate-temperature solid oxide fuel cells have been synthesized using sol-gel synthesis with zirconium ethoxide and scandium acetate in ethylene glycol as precursors and …

    unr Repository record for Development of Zirconia-Based Mesoporous Materials for Intermediate-Temperature Solid-Oxide Fuel Cells (opens in a new tab)

  12. Material Synthesis and Fabrication Method Development for Intermediate Temperature Solid Oxide Fuel Cells

    … oxide fuel cells (SOFCs) are operated in high temperature conditions (750-1000 oC). The high operating temperature in turn may lead to very complicated material degradation issues, significantly increasing the cost and reducing the durability of SOFC material systems. In order to widen material …

    south-carolina Repository record for Material Synthesis and Fabrication Method Development for Intermediate Temperature Solid Oxide Fuel Cells (opens in a new tab)

  13. CERAMIC AND COMPOSITE ANODES FOR HYDROCARBON-FUELED INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELLS

    … fuel cells (SOFCs) using hydrocarbon fuels at temperatures from 500-650 °C has been studied in this dissertation, with a focus on tailoring the fuel electrode (anode) to overcome challenges at these lower operating temperatures. The parameter space for SOFC operation on hydrogen and hydrocarbon …

    maryland Repository record for CERAMIC AND COMPOSITE ANODES FOR HYDROCARBON-FUELED INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELLS (opens in a new tab)

  14. Development and characterization of materials for intermediate temperature solid oxide fuel cell anodes

    … energy into electrical energy through high temperature electrochemical oxidation of fuels, but there remain serious obstacles before these devices can be fully implemented into the modern energy infrastructure. The operation of SOFCs with hydrocarbon fuels has the highest potential for …

    gatech Repository record for Development and characterization of materials for intermediate temperature solid oxide fuel cell anodes (opens in a new tab)

  15. Geochemistry and characterization of intermediate temperature eclogites from the Acatlan Complex, southern Mexico

    The Acatlan Complex of southern Mexico is one of two high-pressure metamorphic belts reported in Mexico. This complex contains an extensive sequence of metabasic, pelitic, granitic, mafic, ultramafic and carbonate rocks affected by an eclogite-facies metamorphic event of apparently Devonian age and …

    arizona-thes Repository record for Geochemistry and characterization of intermediate temperature eclogites from the Acatlan Complex, southern Mexico (opens in a new tab)

Page 1 of 13