Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Intermetallic precipitates"”.
-
Investigation of 18 per cent nickel maraging steel welds by transmission electron microscopy
… and ductile martensite were determined. Two intermetallic precipitates, assumed to be Ni<sub>3</sub>Mo and Ni<sub>3</sub>Ti, appeared to have approximately the same size and morphologies in the welds as in the parent metal. The Ni<sub>3</sub>Mo precipitates appear to have a rod-like …
-
Phase transformations in cast superaustenitic stainless steel
… properties and mechanical strength. However, intermetallic precipitates such as sigma (sigma) and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. The goal of this study was to accurately …
-
Effect of Cr Content on Corrosion Resistance of Fe-Cr-Ni Alloys Exposed in Supercritical Water (SCW)
… requiring further study was the observation of intermetallic precipitates that formed below the Cr-depleted zone adjacent to the alloy/scale interface in both alloys when exposed for 500 h at 625 °C and their possible influence on the in-service mechanical integrity.
-
Experimental and Theoretical Design and Study of Advanced Precipitation-Strengthened High-Entropy Alloys
… energy (SFE), ductile multicomponent intermetallic precipitates, and integrated various engineering concerns. Therefore, the concept of HEAs opens up new avenues to develop advanced high-performance alloys for overcoming some drawbacks appeared in traditional alloys. In this work, two …
-
Containerless melting and characterization of cast magnesium AZ31-B alloy at low superheat in the magnetic suspension melting process
… of alloying elements, and the formation of intermetallic precipitates in MSM cast AZ31-B alloy in a unidirectional bottom chilled ceramic mold were investigated. For a baseline comparison, the alloy was also cast using conventional methods at a superheat of 60°C. Analysis of cooling curves …
-
Development of novel aluminium matrix nanocomposites
… diameters under 1µm, along with some possible intermetallic precipitates. NQX/Ribbons composite also contains amorphous phase and a crystalline Ti<sub>2</sub>(Cu, Ni) phase.</p> <p>Compression strength of the alloy/composites at room temperature and elevated temperature are superior to …
-
Cyclic stress effect on stress corrosion cracking of duplex stainless steel in chloride and caustic solutions
… 2205. Stress corrosion cracks initiated from the intermetallic precipitates in acidic chloride environment, and the cracks initiated from austenite phase in WL environment. Cold-working has been found to retard the crack initiations induced by cyclic stresses.
-
Laser powder bed fusion fabrication of cerium-containing aluminium alloys: solidification behaviour, microstructure evolution and mechanical properties
… results in formation of coarsening resistant intermetallic precipitates. Despite these alloys exhibiting excellent strength retention at elevated temperatures, room temperature ductility was low, and this appeared to be due to coarse needle-like precipitate morphology formed due to low cooling …
-
Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel
… surface oxide and internal Y-enriched intermetallic precipitates. This novel microstructural evolution process resulted in the successful formation of nano-metric Y-enriched dispersoids, as confirmed using high energy X-ray diffraction and transmission electron microscopy (TEM), …
-
The electrochemistry of titanium corrosion
… On alloy materials containing Ti-noble metal intermetallic precipitates, the passive film seems to be discontinuous, presumably because it does not form as well over exposed intermetallic particles as it does over grains of titanium. This observation helps explain the enhanced corrosion …
-
Thermo-mechanical Stability and Strengthening Mechanisms of Ti/Ni Multilayer Thin Films
… further annealing, solid solution hardening, intermetallic precipitation hardening, and fully intermixed alloy structure continue to strengthen the thin layered films, while recrystallization and grain growth lead to the eventual softening of thick layered films. For films with intermediate …
-
Corrosion Behaviour of Proprietary Micro-alloyed Steels
… to the formation of Zr- and/or Hf-base intermetallic precipitates. These precipitates have the ability to pin down grain boundaries thus limiting grain growth which resulted in improved mechanical properties such as increased hardness and tensile strength without any negative impact on …
-
Effect of current density ramping on the anodic reaction and morphology of aerospace aluminum alloys
… resistance to stress cracking corrosion. These intermetallic compounds, i.e., copper and zinc, promote oxygen evolution and stress as they accumulate in and on the surface of the forming aluminum oxide. These inclusions lead to increased electrical resistance that forms porous and flawed …
-
Μελέτη επίδρασης του υδρογόνου στη μηχανική συμπεριφορά μεταλλικών σωληνώσεων μεταφοράς πετρελαιοειδών και υδρογονανθράκων
… interphases between solidification phases, intermetallic precipitates and matrix material. Additionally, it was detected the evolution of stepwise microcracking phenomenon, with preferential points for crack initiation the interfaces between hydrides, embrittling phases with stoichiometrical …