Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Interphase region"”.

  1. Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region

    … intrusion into the polysulfone-Al/Li oxide interphase region is discussed. Specifically, water molecules diffuse into the polysulfone rather than transporting along the interface. Moisture then attacks the oxide interface. Thin polysulfone coatings on pretreated aluminum surfaces were …

    vt Repository record for Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region (opens in a new tab)

  2. Multiscale Characterization of Cementitious Interphase Regions Using an Integrated Microstructural-Mechanical-Chemical Approach

    … are substantially governed by the quality of the interphase region because it acts as a bridge transferring forces between aggregates and a binding matrix and is generally susceptible to damage. In spite of advancements made over the last several decades, understanding the interfacial region of …

    nebraska Repository record for Multiscale Characterization of Cementitious Interphase Regions Using an Integrated Microstructural-Mechanical-Chemical Approach (opens in a new tab)

  3. Micromechanics of Granular Media: A Fundamental Study of Interphase Systems

    The interphase is a localized region adjacent to a manufactured inclusion that is surrounded by granular soil. These regions are ubiquitous in civil infrastructure and often are components of large-scale composite systems. The interphase region influences load-deformation behavior of the entire …

    vt Repository record for Micromechanics of Granular Media: A Fundamental Study of Interphase Systems (opens in a new tab)

  4. Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study

    … polymer, and an enhanced compressibility in the interphase region. As a repercussion of this higher compressibility, the filler-induced reinforcement is negatively affected; the value of the Young’s modulus (E) for this nanocomposite is found to be unchanged compared to that of the neat polymer. …

    ttu Repository record for Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study (opens in a new tab)

  5. Characterization and interphase mechanical properties of epoxy/PVP blends

    … composites. Understanding the influence of the interphase region between the carbon fiber and epoxy matrix is crucial in enhancing the performance of carbon fiber reinforced epoxy composite materials. In this work, simulated interphase regions, in the form of pure and modified epoxies were …

    vt Repository record for Characterization and interphase mechanical properties of epoxy/PVP blends (opens in a new tab)

  6. Durability of Polyimide/Titanium Adhesive Bonds: An Interphase Investigation

    … subjected to harsh environmental conditions, the interphase, the three-dimensional region surrounding the adhesive/substrate interface, becomes critically important. Frequently, failure occurs in this region after adhesively bonded systems are subjected to elevated temperature oxidative aging. In …

    vt Repository record for Durability of Polyimide/Titanium Adhesive Bonds: An Interphase Investigation (opens in a new tab)

  7. NANOSCALE CHARACTERIZATION OF FIBER/MATRIX INTERPHASE AND ITS IMPACT ON THE PERFORMANCE OF NATURAL FIBER REINFORCED POLYMER COMPOSITES

    … is a valuable technique for evaluating the interphase of natural fiber-reinforced polymer composites and for characterizing the elastic properties of cell wall layers of natural fibers. The nanoscale spatial resolution of CR-FM, combined with its ability to provide quantitative modulus …

    utk-theses Repository record for NANOSCALE CHARACTERIZATION OF FIBER/MATRIX INTERPHASE AND ITS IMPACT ON THE PERFORMANCE OF NATURAL FIBER REINFORCED POLYMER COMPOSITES (opens in a new tab)

  8. A chemical and mechanical evaluation of interfacial fracture in dicyandiamide cured epoxy/steel adhesive systems

    … which were believed to influence the epoxy/steel interphase region, specifically the elasomeric toughener concentration, the dicyandiamide concentration, and the cure temperature. Bulk mechanical measurements were conducted to provide background information for comparison with the fracture data, …

    vt Repository record for A chemical and mechanical evaluation of interfacial fracture in dicyandiamide cured epoxy/steel adhesive systems (opens in a new tab)

  9. A model to predict the long-term strength of E-glass fiber composites subjected to environmental exposure.

    … models for the reinforcement fibers and the interphase region were developed and verified using existing data. The two constituent models were combined through the modification of Rosen’s model and compared with both unidirectional composite and laminate data. The composite model showed good …

    wvu Repository record for A model to predict the long-term strength of E-glass fiber composites subjected to environmental exposure. (opens in a new tab)

  10. A Preliminary Characterization of the Interfacial Properties of Solution Spun Carbon Nanotube Fibers

    … to impact. Through characterization of the interphase region of a matrix-filler composite system, commentary on the efficiency of stress transfer between the bulk and reinforcement, and thus the quality of the adhesive bond, is provided. In order to acquire the necessary data for proper …

    rice Repository record for A Preliminary Characterization of the Interfacial Properties of Solution Spun Carbon Nanotube Fibers (opens in a new tab)

  11. A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites

    … an effort to produce a graded, multifunctional interphase region used to improve the interfacial strength between the matrix and the reinforcing fiber. Characterization of the IFSS was performed using the single-fiber fragmentation test. It is shown that the application of a MWCNT coating …

    tamu Repository record for A characterization of the interfacial and interlaminar properties of carbon nanotube modified carbon fiber/epoxy composites (opens in a new tab)

  12. Study on the Nanocomposite Underfill for Flip-Chip Application

    … relationship between materials properties and interphase structure in the composite. The results of this thesis contribute to the knowledge of colloidal dispersion of nanoparticles in organic liquid by systematically investigating the effects of particle size, particle surface chemistry and …

    gatech Repository record for Study on the Nanocomposite Underfill for Flip-Chip Application (opens in a new tab)

  13. Nanoindentation of thin organic films and self-assembled monolayers

    … between polymers and stiff substrates contain an interphase region (10 nm thick) where the properties of the polymer differ from those of the bulk. It has also been observed that interfacial cracks actually grow in these interphase regions. Thus it is important to understand the mechanical …

    texas Repository record for Nanoindentation of thin organic films and self-assembled monolayers (opens in a new tab)

  14. Dielectric properties and degradation monitoring in polymer-matrix structural composites

    … The model accounts for the presence of an interphase region, which takes on a dominant role in influencing properties of nano-filled composites due to the large surface-area-to-volume ratio of nanoscale fillers.</p> <p>Regarding fiber-reinforced PMCs, spectroscopic techniques have been …

    iastate Repository record for Dielectric properties and degradation monitoring in polymer-matrix structural composites (opens in a new tab)

  15. Surface analysis of sodium oleate coated poly (ethylene terephthalate) films

    … coated with thin overlayers. The surface or interphase region of sodium oleate coated polyethylene terephthalate (PET) films was studied by angle dependent x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The effect of corona discharge pre-treatment on sodium …

    vt Repository record for Surface analysis of sodium oleate coated poly (ethylene terephthalate) films (opens in a new tab)

  16. Sizing and characterization of carbon fibers with aqueous water-dispersible polymeric interphases

    … by varying the properties of the fiber/matrix interphase region. One method to modifY the properties of this interphase is through the application of a sizing to the carbon fiber. Recent work at Virginia Tech has shown that polymer-modified interphases can lead to increases by as much as two …

    vt Repository record for Sizing and characterization of carbon fibers with aqueous water-dispersible polymeric interphases (opens in a new tab)

  17. Multiscale Modeling of CNT-Polymer Nanocomposites and Fuzzy Fiber Reinforced Polymer Composites for Strain and Damage Sensing

    … local piezoresistive response of the anisotropic interphase region, the piezoresistive responses of the overall fuzzy fiber reinforced polymer composites are obtained. The modeling results not only provide a possible explanation for the small gauge factors as observed in experiments, but also give …

    vt Repository record for Multiscale Modeling of CNT-Polymer Nanocomposites and Fuzzy Fiber Reinforced Polymer Composites for Strain and Damage Sensing (opens in a new tab)

  18. Multiscale modelling of elastic properties of non-bonded single-walled carbon nanotube polymer matrix composites

    … of SWCNT-PMC is significantly affected by the interphase and waviness of SWCNTs. Although the impact of a pre-determined interphase on the stiffness of SWCNT-PMC has been studied thoroughly, little is known about the elastic properties of the interphase layer. Moreover, the waviness of SWCNTs …

    unsw Repository record for Multiscale modelling of elastic properties of non-bonded single-walled carbon nanotube polymer matrix composites (opens in a new tab)

  19. Feasibility of Ellipsometric Sensor Development for Use During PECVD SiOx Coated Polymer Product Manufacturing

    … (PP) provided by NS3 showed a heterogeneous interphase layer between the deposited oxide and the polymer substrate where the composition of the layer was continually changing. A similar region, which violates the homogenous assumption the ellipsometric model relied on, was anticipated for the …

    calpoly Repository record for Feasibility of Ellipsometric Sensor Development for Use During PECVD SiOx Coated Polymer Product Manufacturing (opens in a new tab)

  20. Altering the fiber-matrix interphase in semicrystalline polymer matrix composites

    … a morphology known as the transcrystalline region is formed on the surface of the reinforcing material. This region introduces a new crystalline structure to the system that is different from that of the bulk matrix material. Whether this region is advantageous or detrimental to the …

    vt Repository record for Altering the fiber-matrix interphase in semicrystalline polymer matrix composites (opens in a new tab)

Page 1 of 2