Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Interposers"”.

  1. Ceramic interposers for high density packaging in 3D LTCC technology

    … In this thesis, a new method for the vertical interposers in LTCC technology is proposed. This method combines the advantages of LTCC, namely low-cost, low dielectric loss at millimeter wave frequencies and the ability to integrate passive components and transmission lines in its inner layers …

    ets-quebec Download PDF for Ceramic interposers for high density packaging in 3D LTCC technology (opens in a new tab)

  2. Study of glass interposers for co-packaging electronic and photonic chips

    In recent years, glass interposers have received significant attention within the microelectronics industry. This interest is primarily driven by their potential for scaling to panel-level packaging, which can reduce the cost of advanced packages. This ability to scale, coupled with excellent …

    cork Repository record for Study of glass interposers for co-packaging electronic and photonic chips (opens in a new tab)

  3. Modeling and simulation of silicon interposers for 3-d integrated systems

    … an efficient modeling approach for silicon interposers in 3-D systems. The developed numerical methods can be classified as several categories. 1. The investigation of the coupling effects in large TSV arrays in silicon interposers. The importance of coupling between TSVs for low resistivity …

    gatech Repository record for Modeling and simulation of silicon interposers for 3-d integrated systems (opens in a new tab)

  4. Modeling, design, and characterization of through vias in silicon and glass interposers

    … 3D ICs. Through vias in stacked silicon ICs and interposers are the key components of a 3D system. The objective of this dissertation is to model through vias in 3D silicon and glass interposers and, to address power and high-speed signal integrity issues in 3D interposers considering silicon …

    gatech Repository record for Modeling, design, and characterization of through vias in silicon and glass interposers (opens in a new tab)

  5. Microwave design of multi-layer interposers for the packaging of photonic integrated circuits

    … typical multi-layer technologies for high-speed interposers is low-temperature co-fired ceramic (LTCC). The motivation of this research is the need of multi-layer interposers suitable for the packaging of high-speed and high-density PICs. A key element to enable this multi-layer interposer is the …

    cork Repository record for Microwave design of multi-layer interposers for the packaging of photonic integrated circuits (opens in a new tab)

  6. Reliability Assessment and Demonstration of Ultra-low-k Dielectric Materials for Advanced Interposers

    The number of connected devices in homes, cars and offices has increased and there is also an increase in advanced data processing algorithms. These have been enabled by artificial intelligence (AI) unprecedented need for ultra-high bandwidth computing. This need for ultra-high bandwidth is driving …

    gatech Repository record for Reliability Assessment and Demonstration of Ultra-low-k Dielectric Materials for Advanced Interposers (opens in a new tab)

  7. Experimental and theoretical assessment of thin glass panels as interposers for microelectronic packages

    … cracking, die cracking, and others. Silicon interposers are being developed to assemble the stacked dies, and then the silicon interposers are assembled on organic substrates. Although such an approach could address stacked-die to interposer reliability concerns, there are still reliability …

    gatech Repository record for Experimental and theoretical assessment of thin glass panels as interposers for microelectronic packages (opens in a new tab)

  8. Polymer materials, processes, and structures for optical turning in 3D glass photonic interposers

    … optical turning structures in ultra-thin glass interposers, for fiber-to-chip or chip-to-chip optical interconnections. The fundamental material and process challenges associated with achieving this objective are encompassed in: (1) polymer-glass interfaces and adhesion, (2) …

    gatech Repository record for Polymer materials, processes, and structures for optical turning in 3D glass photonic interposers (opens in a new tab)

  9. Design and characterization of interposers for high speed fine pitch wafer level packaged device testing

    … and characterization, describes how these interposers can achieve the test specifications. A prototype for the elastomer interposer was fabricated and functionally tested. Measurements of the test were compared to the simulations. Optimizations and parametric variations studies on the high …

    nus Repository record for Design and characterization of interposers for high speed fine pitch wafer level packaged device testing (opens in a new tab) Download file for Design and characterization of interposers for high speed fine pitch wafer level packaged device testing (opens in a new tab)

  10. Low loss and high tolerance out-of-plane single-mode optical interconnections in glass interposers

    The specific focus of this dissertation research is to design and demonstrate low loss and high tolerance out-of-plane single-mode fiber-to-chip optical interconnections in glass to address three challenges in performance, density, and cost: 1) high fiber-to-chip coupling loss, 2) lack of high …

    gatech Repository record for Low loss and high tolerance out-of-plane single-mode optical interconnections in glass interposers (opens in a new tab)

  11. Electrical modeling , design and high-frequency characterisation of through-package-vias in ultra-thin 3d glass interposers

    … Tech previously proposed and demonstrated 3D interposers as a superior alternative to achieve 3D-IC like interconnect lengths at much lower cost and without the thermal problems . Glass is the best material for 3D interposer packages due to its superior dimensional stability and flatness …

    gatech Repository record for Electrical modeling , design and high-frequency characterisation of through-package-vias in ultra-thin 3d glass interposers (opens in a new tab)

  12. Studies of interfacial adhesion and copper plating chemistry for metallization of through-package-vias in glass interposers

    High quality copper plating in blind-vias and through-vias is crucial to achieve high electrical performance and reliability from the integrated circuit (IC) to the package substrate and printed wiring board (PWB). Cu has been deposited and patterned by several chemical and vapor deposition …

    gatech Repository record for Studies of interfacial adhesion and copper plating chemistry for metallization of through-package-vias in glass interposers (opens in a new tab)

  13. Electrical modeling, design and characterization of tapered through-package-vias in glass interposers for high-performance applications

    … design, and characterize tapered TPVs in glass interposers to provide design guidelines for TPVs by quantifying their impact on electrical performance. To achieve these objectives, three research tasks were carried out: 1) electrical modeling of TPVs by taking into account both geometric and …

    gatech Repository record for Electrical modeling, design and characterization of tapered through-package-vias in glass interposers for high-performance applications (opens in a new tab)

  14. Thermal performance enhancement of packaging substrates with integrated vapor chamber

    … layer (RDL), on the thermal performance of glass interposers through numerical and experimental approaches. Numerical parametric study on 2.5D interposers shows that as more copper structures are incorporated in glass interposers, the performance of silicon and glass interposers becomes closer, …

    gatech Repository record for Thermal performance enhancement of packaging substrates with integrated vapor chamber (opens in a new tab)

  15. Through-package-via hole formation, metallization and characterization for ultra-thin 3D glass interposer packages

    … high BW are proposed to be achieved using 3D interposers that have ultra-small through-package-via (TPVs) interconnections to connect the logic device on one side of the interposer to the memory on the other side. The current approach is primarily based on organic or silicon interposers. …

    gatech Repository record for Through-package-via hole formation, metallization and characterization for ultra-thin 3D glass interposer packages (opens in a new tab)

  16. Modeling, design, materials, processes and reliability of multi-layer redistribution wiring layers on glass substrates for next generation of high-performance computing applications

    … driving cars. The development of 2.5D silicon interposers in 2010 for heterogeneous integration of graphical processing unit (GPU) to high bandwidth memory (HBM) dies addressed this demand to a certain extent. The back-end-of-line (BEOL) RDL processes in silicon interposers have reached the …

    gatech Repository record for Modeling, design, materials, processes and reliability of multi-layer redistribution wiring layers on glass substrates for next generation of high-performance computing applications (opens in a new tab)

  17. Impact of fabrication process variations on the electrical performance of impedance controlled 2 micron multilayer redistribution layers (RDL) on glass interposers

    … lines at 2 µm critical dimensions (CD) on glass interposers for 2.5D multi-die interconnections. The fundamental studies in this research focus on systematically analyze the signal performance impact due to process variations using 3D electro-magnetic simulations, and exploring several unit …

    gatech Repository record for Impact of fabrication process variations on the electrical performance of impedance controlled 2 micron multilayer redistribution layers (RDL) on glass interposers (opens in a new tab)

Page 1 of 3