Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Inverse Heat Transfer"”.
-
An intelligent approach to inverse heat transfer analysis of irradiative enclosures
… the journal of "International Communications in Heat and Mass Transfer" and one has been accepted by the editorial board of "Chemical Engineering Communications". This study, based on research undertaken in the area of Inverse Heat Transfer Problems (IHTP), aims at analyzing the applicability of …
-
Novel Numerical Approaches for the Resolution of Direct and Inverse Heat Transfer Problems
… been developed for the resolution of direct and inverse problems, specifically in the disciplines of radiation and conduction heat transfer.</p> <p>Direct problems are generally well-posed and readily lend themselves to standard and well-defined mathematical solution techniques. Inverse problems …
-
Estimation of transient heat transfer coefficients in multi-dimensional problems by using inverse heat transfer methods
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 1987
-
INVERSE IDENTIFICATION OF TRANSIENT THERMAL PROPERTIES AND HEAT SOURCES USING GENETIC ALGORITHMS
This work investigates the solution to inverse problems in heat transfer using genetic algorithms. Genetic algorithms are robust, stochastic search techniques which also admit the ability to search highly nonlinear problems. In this work, computational techniques are developed for the simultaneous …
-
Erosion effects on TVC vane heat transfer characteristics
This work describes the effects of erosion on the heat transfer characteristics on thrust vector control vanes exposed to aluminized propellant exhaust flows. This was accomplished using an inverse heat transfer parameter identification of quaner scale models. The model is based on a four node …
-
Clinical Validation of Patient-Specific Inverse Modeling with Surface Temperatures and Physiological and Geometrical Factors in Breast Cancer Detection
… work describes a novel patient-specific IRI inverse heat transfer algorithm based on the digital model of the breast generated from MRI images and the IRI-Numerical Engine (IRI-NE). Validation of the IRI-NE is conducted with clinical IR images of 23 biopsy-proven breast cancer patients (24 …
-
Inverse Method to Estimate Heat Generation Rates in Lithium Ion Cells
… fast charging), which invariably leads to higher heat generation. This heat if not dissipated properly, rapidly increases the cell temperature and eventually leads to thermal runaway. Thus, the knowledge of heat generation as a function of current is of utmost importance for the design of cooling …
-
Thermal Contact Resistance Measurement and Related Uncertainties
… approach, while the new method utilizes inverse heat transfer techniques to account for inherent unsteadiness in these quasi-steady-state measurements. The understanding of the uncertainty for the empirical data has helped quantify the reliability of thermal contact resistance. As a …
-
Determination of Temperature-dependent Thermophysical Properties during Rapid Solidification of Metallic Alloys
… rates using a set of impinging water jets. An inverse heat transfer algorithm has been developed to estimate the thermal conductivity and thermal diffusivity as a function of the temperature of the solidifying samples under high cooling rates. To validate the accuracy of the inverse heat …
-
Estimativa de condutâncias térmicas de contato em interfaces irregulares usando a técnica da transformada integral clássica e o método dos funcionais de reciprocidade
… in obtaining analytical solutions for the inverse heat transfer problem that seeks to estimate the thermal contact conductance (TCC) distribution on the interface of a body composed of two materials. Yet, the theoretical development upon which this approach is based is not limited to the …
-
Thermal analysis of the startup phase for D.C. casting of an AA5182 aluminum ingot
… out principally using a finite element based heat flow model, but a preliminary thermal stress model was also employed. Key to the study was the experimental measurement of temperature in the region of the cast prone to crack formation and the development of a technique to determine the …
-
Quantification of the heat transfer during the plasma arc remelting of titanium alloys
… requires an accurate description of the torch heat flux distribution. This research presented in this thesis focused on developing and verifying an inverse heat transfer analysis methodology to characterize the heat flux distribution from a plasma torch. A test block trial was conducted with in …
-
Experimentelle Untersuchung von auftriebsbehafteter Strömung und Wärmeübertragung einer rotierenden Kavität mit axialer Durchströmung
The flow and heat transfer within compressor rotor cavities of aero-engines is a conjugate problem. Depending on the operating conditions buoyancy forces, caused by radial temperature difference between the cold throughflow and the hotter shroud, can influence the amount of entrained air …
-
Measurement of residual stresses and distortion in rapidly quenched components
… can occur during the manufacturing of solution heat-treated 2xxx aluminum alloys. Rapid quenching rates are being used to improve mechanical properties by inducing percepitation hardening but they result in high thermal stresses, which cause severe distortion and high levels of residual …
-
Water extraction from the atmosphere
… maintained below the dew point by a radiative heat loss from its surface to the night sky. To properly simulate the condensation process, an accurate estimation of the effective sky temperature is required. To estimate the effective night sky temperature an experimental system, consisting of a …
-
Conceptual thermal response modeling, testing, and design of flexible heatshield insulation materials
… of a stack of material sheets, including heat rate resistant outer fabrics, heat load resistant insulation, and an air-tight gas barrier to prevent pressure leaks. This dissertation advances the state-of-the-art of thermal modeling, material property testing, and design of FTPS. In this …
-
Heat transfer characterization of secondary cooling in the horizontal direct chill casting process for aluminum alloy re-melt ingot
… the water spray conditions. Characterizing the heat transfer during the secondary cooling process is necessary for improved understanding of the process. Since the accessibility of the HDC casting machine is limited and the direct measurement of heat transfer in secondary cooling are difficult, …
-
Estimation of thermal properties of randomly packed bed of silicagel particles using IHTP method
… particle beds are necessary to accurately model heat and mass transfer processes in particle beds that under-go preferred processes and changes. The objective of this study is to use a proven analytical/numerical methodology to estimate the unknown transport properties within test cells filled …
-
A Metrics-based Sustainability Assessment of Cryogenic Machining Using Modeling and Optimization of Process Performance
… based on scientific understanding of the heat transfer mechanism in cryogenic machining limits the process optimization from achieving the most sustainable performance. In this dissertation, based on a proposed Process Sustainability Index (ProcSI) methodology, the sustainability …
-
Analysis of water cooling process of steel strips on runout table
… 3D FE programs are developed for the direct and inverse heat transfer analysis. Studies show that gradient-based inverse algorithms suffer from high sensitivity to measurement noise and instability in small time steps. These two shortcomings limit their application in modeling of the real …
Page 1 of 2