Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Inverted-T"”.

  1. Shear cracking in inverted-T straddle bents

    … diagonal cracking in reinforced concrete inverted-T (IT) straddle bent caps has been reported throughout the State of Texas. Many of the distressed structures were recently constructed and have generally been in service for less than two decades. The unique nature of the problem prompted a …

    texas Repository record for Shear cracking in inverted-T straddle bents (opens in a new tab)

  2. Reassessing hanger reinforcement requirements in inverted T-beams

    … design requirements in AASHTO LRFD (2024) for inverted T-beams. In this study, hanger reinforcement is a reinforcement type unique to inverted T-beams to transfer load from the ledge into the web. Current design provisions in AASHTO LRFD (2024) require hanger reinforcement to be provided in …

    texas Repository record for Reassessing hanger reinforcement requirements in inverted T-beams (opens in a new tab)

  3. Structural Performance of Skew Reinforcing in Inverted-T Bridge Caps

    For the past decades, the inverted-T bridge caps (ITBC) are widely used in most of the bridges in the United States as they are aesthetically pleasing and offer a practical means to increase vertical clearance. In some typical cases, the bridge caps are skew when two roads are not aligned …

    houston Repository record for Structural Performance of Skew Reinforcing in Inverted-T Bridge Caps (opens in a new tab)

  4. Refinement of the Inverted T-Beam Bridge System for Virginia

    The inverted T-beam bridge system is a bridge construction technique that follows accelerated bridge construction processes. The system was discovered in France and first adopted in the U.S. by the Minnesota Department of Transportation. In 2012 the system was modified and adopted by Virginia, with …

    vt Repository record for Refinement of the Inverted T-Beam Bridge System for Virginia (opens in a new tab)

  5. Transverse Sub-Assemblage Testing of the Inverted-T Bridge System

    The inverted-T bridge system is a rapid bridge construction technique that consists of precast inverted-T girders placed adjacent to one another and covered with a cast-in-place deck. This system was first implemented in the U.S. by the Minnesota Department of Transportation (Mn/DOT). This research …

    vt Repository record for Transverse Sub-Assemblage Testing of the Inverted-T Bridge System (opens in a new tab)

  6. Rehabilitation of RC-inverted-T bentcarp girders using CFRP sheets

    … old and designed based on outdated design codes. Inverted-T beams used as bentcap girders that support the bridge's longitudinal precast beams provided a popular structural system of many existing bridges. The structural behaviour of inverted-T beams is different than that of conventional …

    concordia Download PDF for Rehabilitation of RC-inverted-T bentcarp girders using CFRP sheets (opens in a new tab)

  7. Design of reinforced concrete inverted-T beams for strength and serviceability

    … diagonal cracking in reinforced concrete inverted-T straddle bent caps has been reported throughout the State of Texas. Many of the distressed structures were recently constructed and all have been in service for less than two decades. The unique nature of the problem prompted a more …

    texas Repository record for Design of reinforced concrete inverted-T beams for strength and serviceability (opens in a new tab)

  8. Recommendations for Surface Treatment for Virginia Inverted T-Beam Bridge System

    … treatment methods for use in the Virginia Inverted T-Beam bridge system. The specific system consists of precast beams with thin bottom flanges placed next to one another, with a cast-in-place slab on top. Previous research has shown that the strength of this system after cyclic loading is …

    vt Repository record for Recommendations for Surface Treatment for Virginia Inverted T-Beam Bridge System (opens in a new tab)

  9. Design criteria for strength and serviceability of inverted-T straddle bent caps

    Several recently built inverted-T bent caps in Texas have shown significant inclined cracking triggering concern about current design procedures for such structures. The repair of such structures is very costly and often requires lane closures. For these reasons TxDOT funded Project 0-6416 aimed at …

    texas Repository record for Design criteria for strength and serviceability of inverted-T straddle bent caps (opens in a new tab)

  10. Structural Performance and Economic Impact of Skewed Reinforcing in Inverted-T Bridge Caps

    Inverted-T bridge caps (ITBCs) are commonly used in highway designs in the United States, as well as in Texas. In some cases, the bent caps are needed to be designed as skew because the bridge may not be aligned perpendicularly with the crossing roads. There is no design method for the skew ITBCs …

    houston Repository record for Structural Performance and Economic Impact of Skewed Reinforcing in Inverted-T Bridge Caps (opens in a new tab)

  11. Seismic performance of an I-girder to inverted-T bent cap bridge connection

    … overall moment capacity of precast I-girder to inverted-T bent cap bridge connections for seismic applications. The current design practice, as outlined by Caltrans' Seismic Design Criteria, assumes that the connection between the precast I-girders and the inverted-T bent cap will degrade in a …

    iastate Repository record for Seismic performance of an I-girder to inverted-T bent cap bridge connection (opens in a new tab)

  12. Structural Behavior of Sixty Degree Skew Reinforcing in Inverted-T Bent Caps in Bridges

    Reinforced concrete inverted-T bent caps (ITBCs) are widely used in the state of Texas due to their pleasant aesthetics and to improve the vertical clearance. Most of the inverted-T bent caps are characterized by a skew angle higher than 45 degrees. The design of skewed inverted-T bent caps is …

    houston Repository record for Structural Behavior of Sixty Degree Skew Reinforcing in Inverted-T Bent Caps in Bridges (opens in a new tab)

  13. Investigation of Concrete Mixtures to Reduce Differential Shrinkage Cracking in Inverted T Beam System

    The inverted T-beam system provides an accelerated bridge construction alternative. The system consists of adjacent precast inverted T-beams finished with a cast-in-place concrete topping. The system offers enhanced performance against reflective cracking and reduces the likelihood of cracking due …

    vt Repository record for Investigation of Concrete Mixtures to Reduce Differential Shrinkage Cracking in Inverted T Beam System (opens in a new tab)

  14. Investigation of Local Failure Mechanisms of Inverted-T Bent Caps and Strengthening Using CFRP Sheets

    Prevalence cracks on in-service inverted-T bent caps were reported over the past decades. These un-desirable cracks formed at the re-entrant corner of inverted-T bent caps are an indication of the local structural deficiencies. To address such a concern, this study presents an experimental and …

    tamu Repository record for Investigation of Local Failure Mechanisms of Inverted-T Bent Caps and Strengthening Using CFRP Sheets (opens in a new tab)

  15. Evaluation of the shear behavior of inverted T-deep beams reinforced with high-strength steel bars

    This research studies the shear performance of inverted T-deep beams reinforced with high-strength steel (HSS) reinforcement bars as part of the TxDOT Project 0-7090, which evaluates the deployment of HSS in Texas bridge structures. In this study, high-strength steel refers to bars with yield …

    texas Repository record for Evaluation of the shear behavior of inverted T-deep beams reinforced with high-strength steel bars (opens in a new tab)

  16. Midpoint estimation applied to the vertical-horizontal illusion

    … or figure presented below the line), uncued, and inverted T conditions. Subject's mean estimates were near the geometric midpoint in the two cued conditions, and significantly above the midpoint in the uncued and inverted T conditions. Mean estimates in the inverted T conditions were significantly …

    unlv Repository record for Midpoint estimation applied to the vertical-horizontal illusion (opens in a new tab) Download PDF for Midpoint estimation applied to the vertical-horizontal illusion (opens in a new tab)

  17. Strut-and-tie model design examples for bridge

    … of the frame corner is described. • Example 3a: Inverted-T Straddle Bent Cap (Moment Frame) - An inverted-T straddle bent cap is modeled as a component within a moment frame. Bottom-chord (ledge) loading of the inverted-T necessitates the use of local STMs to model the flow of forces through the …

    texas Repository record for Strut-and-tie model design examples for bridge (opens in a new tab)

  18. Modeling Dense Storage Systems With Location Uncertainty

    … a special storage configuration called an inverted T configuration, which has one horizontal and one vertical aisle. Inverted T configurations have fewer aisles than a traditional aisle-based storage environment. This increases the storage density; however, requires that some items to be …

    ucf Repository record for Modeling Dense Storage Systems With Location Uncertainty (opens in a new tab)

  19. Development of a Composite Concrete Bridge System for Short-to-Medium-Span Bridges

    The inverted T-beam bridge system provides an accelerated bridge construction alternative for short-to-medium-span bridges. The system consists of adjacent precast inverted T-beams finished with a cast-in-place concrete topping. The system offers enhanced performance against reflective cracking, …

    vt Repository record for Development of a Composite Concrete Bridge System for Short-to-Medium-Span Bridges (opens in a new tab)

  20. Retrospektive Analyse zum Vergleich verschiedener Mamillenstielungen nach invertierter T-Reduktionsplastik mithilfe kosmetischer und operativer Parameter

    … of the nipple-areola complex during the standard inverted-T reduction mammoplasty. The aim of the presented analysis is to describe the modified surgical technique with emphasis on operative and patient-centered parameters, adverse events in the mediocranial pedicle compared to other pedicles, …

    fu-berlin Repository record for Retrospektive Analyse zum Vergleich verschiedener Mamillenstielungen nach invertierter T-Reduktionsplastik mithilfe kosmetischer und operativer Parameter (opens in a new tab)

Page 1 of 2