Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Inverter design"”.

  1. Electromagnetic compatibility in power inverter design

    "Power inverter systems generate significant electromagnetic emissions. Methods were studied to model these systems and to reduce their emissions. Three topics are presented in this dissertation. Methods were developed to obtain simple SPICE models for complex systems which relate circuit …

    must-thes Repository record for Electromagnetic compatibility in power inverter design (opens in a new tab)

  2. Inverter design and analysis using multiple reference frame theory

    … a Fourier series representation. By modeling an inverter connected to a boost maximum power point tracker (MPPT) in this manner, frequency transfer properties can be preserved and harmonics throughout the system can be predicted. A state space model taking into account the dc and fundamental grid …

    must-thes Repository record for Inverter design and analysis using multiple reference frame theory (opens in a new tab)

  3. A New High-Performance Multisource Inverter: Design, Control, and Implementation

    … vehicle, there is at least a traction inverter that converts energy between the battery and electric machine(s). The most common electric vehicles in the market utilize conventional two-level traction inverter for DC link voltages less than 700 Vdc, while according to the targets that …

    queens Repository record for A New High-Performance Multisource Inverter: Design, Control, and Implementation (opens in a new tab)

  4. Three-Phase Inverter Design Using Wide-Bandgap Semiconductors to Achieve High Power Density

    … standards. This thesis concerns itself with the design methodology of a highly power dense converter, as applied to a three-phase inverter. By using figures of merit, simple modelling techniques and novel discrete component selection tools, a converter is designed that is capable of switching …

    mcmaster Repository record for Three-Phase Inverter Design Using Wide-Bandgap Semiconductors to Achieve High Power Density (opens in a new tab)

  5. Characterization and Utilization of 600 V GaN GITs for 4.5 kW Single Phase Inverter Design

    … GaN, while theoretically beneficial to converter design, presents several challenges due to the presence of printed circuit board (PCB) and device parasitics. Therefore, it is imperative that the results of device characterization reflect actual device behavior in order to adequately model the …

    ut-knoxville Repository record for Characterization and Utilization of 600 V GaN GITs for 4.5 kW Single Phase Inverter Design (opens in a new tab)

  6. High-Efficiency and High-Frequency Resonant Converter Based Single-Stage Soft-Switching Isolated Inverter Design and Optimization with Gallium-Nitride (GaN)

    Isolated inverter can provide galvanic isolation which is necessary for some applications with safety regulations. Traditionally, a two-stage configuration is widely applied with isolated dc-dc stage and a sinusoidal pulse-width-modulated (SPWM) dc-ac stage. However, this two-stage configuration …

    vt Repository record for High-Efficiency and High-Frequency Resonant Converter Based Single-Stage Soft-Switching Isolated Inverter Design and Optimization with Gallium-Nitride (GaN) (opens in a new tab)

  7. The design of a Thyristor inverter system for loading a diagonal conducting wall magnetohydrodynamic generator

    … the AC power system. The approach taken was to design and test an experimental thyristor inverter system for a one hundred kilowatt DC power diagonal conducting wall magnetohydrodynamic generator. From the theoretical and experimental data, information was gained as to the special requirements …

    ut-knoxville Repository record for The design of a Thyristor inverter system for loading a diagonal conducting wall magnetohydrodynamic generator (opens in a new tab)

  8. Design considerations of a thirty-kilowatt, thirty-kilohertz, full-bridge inverter for application in a very-low-frequency communications system

    A thirty-kilohertz thirty-kilowatt full-bridge inverter design is presented. The inverter module forms an integral part of a very-low-frequency transmitter for a submarine communications application. Device selection and drive selection as well as testing data for inverter clamped mode of operation …

    vt Repository record for Design considerations of a thirty-kilowatt, thirty-kilohertz, full-bridge inverter for application in a very-low-frequency communications system (opens in a new tab)

  9. MULTI-OBJECTIVE DESIGN OPTIMIZATION OF SIC-BASED INVERTER AND SIMULATION MODELLING OF AN ELECTRICAL VEHICLE DRIVE-TRAIN

    … to address the optimization problem of an inverter design. Silicon-carbide (SiC) devices are the most suitable material for the electrical vehicle (EV) voltage source inverter (VSI) and are used the various designs to find the best design across the devices at various switching frequency …

    nus Repository record for MULTI-OBJECTIVE DESIGN OPTIMIZATION OF SIC-BASED INVERTER AND SIMULATION MODELLING OF AN ELECTRICAL VEHICLE DRIVE-TRAIN (opens in a new tab) Download file for MULTI-OBJECTIVE DESIGN OPTIMIZATION OF SIC-BASED INVERTER AND SIMULATION MODELLING OF AN ELECTRICAL VEHICLE DRIVE-TRAIN (opens in a new tab)

  10. Multi-Phase Fault Tolerant PMSM Drive Systems

    … with all-inclusive motors that include sensors, inverter modules, and a cooling system, much like an automobile engine. Furthermore, these designs simplify fault condition maintenance because their independent single-phase structure allows them to be used with replaceable modular inverter units …

    tamu Repository record for Multi-Phase Fault Tolerant PMSM Drive Systems (opens in a new tab)

  11. WIDE OPERATING RANGE RESONANT CONVERTERS

    … source and ensures soft-switching of all its inverter and rectifier transistors with low circulating currents at all output voltage levels. An automotive LED driver that needs to deliver a constant 0.5 A output current over a 3.3 V - 49.5 V output voltage range is built using the proposed …

    cornell Repository record for WIDE OPERATING RANGE RESONANT CONVERTERS (opens in a new tab)

  12. Induction Heating of Aluminum Cookware

    … work coil. The resultant impedance complicates inverter design, as it is too low to be efficiently driven with conventional inverter topologies. The magnitudes of current involved in exciting this impedance also severely impact the efficiency of the coil and resonant components, requiring …

    vt Repository record for Induction Heating of Aluminum Cookware (opens in a new tab)

  13. On the Mechanical Design and Thermal Management of a 1-Megawatt Inverter for Aerospace Propulsion Applications

    … propulsion system performance. High-power inverters are central to this transition, acting as the critical interface between power sources and propulsion motors. To enhance this transition, power densities of these systems must increase. Achieving higher power densities in aerospace …

    mcmaster Repository record for On the Mechanical Design and Thermal Management of a 1-Megawatt Inverter for Aerospace Propulsion Applications (opens in a new tab)

  14. A Novel Induction Heating System Using Multilevel Neutral Point Clamped Inverter

    This thesis investigates a novel DC/AC resonant inverter of Induction Heating (IH) system presenting a Multilevel Neutral Point Clamped (MNPCI) topology, as a new part of power supply design. The main function of the prototype is to provide a maximum and steady state power transfer from converter …

    plymouth Repository record for A Novel Induction Heating System Using Multilevel Neutral Point Clamped Inverter (opens in a new tab)

  15. Design of High Power Density Three-Level Inverter for Aircraft Application

    … in aircraft application. The research focuses on design of high power density three-level inverter emphasizing on passive reduction through novel modulation and control, paralleling and interleaving strategy, filter modeling and design optimization.First, understanding harmonic characteristics in …

    utk-theses Repository record for Design of High Power Density Three-Level Inverter for Aircraft Application (opens in a new tab)

  16. An investigation of electronic pole changing in high inverter count induction machines

    The design of powerful and compact electric machines in highly dynamic applications such as electric traction and integrated starter/generators is an extremely difficult engineering challenge. Use of conventional machine designs with components designed for fixed voltage and frequency operation, …

    uiuc Repository record for An investigation of electronic pole changing in high inverter count induction machines (opens in a new tab)

  17. Βέλτιστος σχεδιασμός υψίσυχνου μονοφασικού αντιστροφέα για τη διασύνδεση φωτοβολταϊκών συστημάτων μικρής ισχύος με το δίκτυο χαμηλής τάσης

    … Generation PV systems with the development of an inverter that will be used for the interconnection of small PV generators with the electric network of urban regions. In more details the development of an inverter with electrical isolation is investigated which on the one hand it will ensure high …

    greece Repository record for Βέλτιστος σχεδιασμός υψίσυχνου μονοφασικού αντιστροφέα για τη διασύνδεση φωτοβολταϊκών συστημάτων μικρής ισχύος με το δίκτυο χαμηλής τάσης (opens in a new tab)

  18. Design of MVA-Class High Power Density Multilevel Inverters for Electric Aircraft Propulsion

    … power systems rises dramatically, multilevel inverters have garnered increasing attention in the aviation industry for their superior performance. To fully unleash the potential of multilevel inverters in MVA-class EAP applications, further optimization of its performance, particularly in …

    mcmaster Repository record for Design of MVA-Class High Power Density Multilevel Inverters for Electric Aircraft Propulsion (opens in a new tab)

Page 1 of 2