Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"JMAK"”.
-
A Calorimetric Investigation of Recrystallization in Al-Mg-Si-Cu Alloys
… different modeling approaches based on global JMAK kinetics were implemented. The first approach utilizes the classical isothermal JMAK expression directly, while the second approach introduces a path variable related to the thermal history of the material in the JMAK description. …
-
Crystallisation kinetics and optical properties of Ge₂Sb₂Te₅
… shown that the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equations are equally valid under linear heating conditions as under isothermal annealing conditions. All peak shift methods for determining the JMAK parameters were shown to be equivalent and valid within the JMAK framework. The …
-
Heat-Affected Zone Softening Kinetics in Dual-Phase and Martensitic Steels
… using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. As the thermal profile during welding is non-isothermal, the effects of temperature and time on steel tempering kinetics could not be separated by examining post-welded properties. The effects of tempering temperature and time were …
-
Previsão de tamanho de grão de aço bainítico forjado assistida por simulação numérica
… semi-empírico de Johnson-Mehl-Avrami-Kolmogorov JMAK é uma excelente ferramenta para a predição e o controle de grão austenítico durante o processamento termomecânico. Porém, a acuracidade dos resultados obtidos com modelos complexos é reduzida devido a suposições que levam a uma inadequada …
-
A Study of Homogenization and Precipitation Hardening Behaviour of Mg-Ca-Zn Alloys
… increased the precipitation rate. Finally the JMAK model was fit to the experimentally analyzed data for the evolution of the relative volume fraction of precipitates. It was found that the experimentally analyzed data was reasonably well described by the JMAK model. The corresponding JMAK …
-
Crystallization dynamics in glass-forming systems
… thermal analysis data to the commonly utilized JMAK model. The phase evolution during crystallization is quantified through in-situ measurements (HEXRD, DSC) and ex-situ microstructural analysis (TEM, HRTEM). The influence of chemical partitioning, diffusion, and crystallographic orientation on …
-
Microstructure evolution in electrodeposited copper thin films for advanced microelectronic applications
… model using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) approach was developed to describe recrystallization during isothermal and continuous annealing treatments. The microstructure evolution in copper-silver alloys and films produced by variable deposition rates was investigated. Phase-field …
-
Recovery and recrystallization behaviour of AA5754 and IF-Boron steel during annealing
… and Cottrell/Aytekin recovery model and the JMAK recrystallization model are used to capture the time evolution of dislocation density and fraction recrystallized, respectively. The required kinetic parameters are determined from isothermal tests. Isothermal annealing models are developed and …
-
Design of the thermomechanical control process of high strength low alloy (HSLA) steels
… an extended Johnson-Mehl-Avrami-Kolmogorov (JMAK) rate model to describe the strain-induced precipitation of niobium carbonitrides and static recrystallization of austenite during TMCP. Aiming at grain size refinement, a genetic algorithm was employed to determine an optimal processing route …
-
Laser ultrasonics measurement of ferrite formation during stepped cooling
… holding temperature can be described by the JMAK approach with the exponent and the rate parameters being consistent with the literature data for the austenite-to-ferrite transformation. Depending on the heat treatment conditions, banded or non-banded microstructures were observed. FEM …
-
Modélisation par éléments finis du soudage des aciers 13Cr-4Ni en présence de transformations de phases
… de transformation de phases diffusives de type JMAK et displacives de type Koistinen-Marburger. La mesure dilatométrique est aussi utilisée pour caractériser la plasticité de transformation. Une configuration particulière du dilatomètre de trempe permet la mesure de la déformation durant la …
-
Time resolved studies of metallic phase formation
… (Co,Fe)2B. The Johnson-Mehl-Avrami-Kolmogorov (JMAK) modelfor isothermal phase transformation kinetics indicates one-dimensional growth with adecreasing nucleation rate for the isolated a-(Co,Fe) solid solution.In a direct comparison, Co6oFe2oB2 o, is shown to undergo multi-phase …
-
Reactions and phase transformations in Monocalcium Phosphate Monohydrate (MCPM) systems
… system. The Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation is applied to the kinetic study. The phase transformation of MCPM to apatite has been accelerated by increasing the NaOH molarity. The high solubility gives MCPM the ability of fast dissolution and reprecipitation. Chemical reactivity …
-
Novel methods and models to validate H2 storage in solid state materials
… of classic nucleation and growth model (JMAK model). The nuclei’s growth is assumed to be limited by surface or even by radius of powder’s particles. Micro modelling is applied on Mg-based material, introducing high accurate kinetic measures obtained by IDA. This leads to extrapolate …
-
Évolution de la microstructure des aciers à haute résistance mécanique durant le traitement thermique de trempe
… l'équation de Johnson-Mehl-Avrami-Kolmogorov (JMAK). Les coefficients JMAK, n et k, ont été déterminés pour chaque condition de l'acier étudié. Les calculs ont indiqué que la nucléation et la croissance de l'austénite dans la région de la surface ont été accélérées plus de 10000 fois en raison …
-
Continuous cooling transformation from coarse-grained austenite in X80 line pipe steels
… steel using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) model with the additivity principle.
-
Austenite decomposition of low carbon high strength steels during continuous cooling
… can be described by the Avrami equation (or JMAK model) which is adapted to non-isothermal transformation by using the Scheil equation of additivity with an Avrami exponent n=0.9 and rate constant b which depends exponentially on temperature; the effect of austenite grain size on …
-
Microstructural evolution model for hot strip rolling of a Nb-Mo complex-phase steel
… based on the Johnson- Mehl-Avrami-Koknogorov (JMAK) theory adopting additivity is employed to describe ferrite as well as bainite growth with individual parameters for each reaction. The present ferrite model includes the formation of the transformation stasis regime, where a critical driving …
-
Exploring the Physics of Rapid Solidification Microstructures From Additive Manufacturing of Metallic Alloys Using Phase-Field Modeling
… with classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory. Results confirmed excellent agreement in predicting the critical nucleation radius and incubation times under ideal conditions. However, when nuclei sizes approached the critical threshold, prolonged incubation led to deviations from …
-
Exploring the Physics of Rapid Solidification Microstructures From Additive Manufacturing of Metallic Alloys Using Phase-Field Modeling
… with classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory. Results confirmed excellent agreement in predicting the critical nucleation radius and incubation times under ideal conditions. However, when nuclei sizes approached the critical threshold, prolonged incubation led to deviations from …
Page 1 of 2