Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Jet Flap"”.

  1. An experimental study of a vane controlled jet flap gust alleviation system

    … gust alleviator using a fluidically actuated jet flap control system was undertaken. The wing model had a variable deflection jet at the trailing edge and was free to move in pitch only. A vane mounted ahead of the wing served as gust sensor and provided the signal which controlled the jet …

    nps Repository record for An experimental study of a vane controlled jet flap gust alleviation system (opens in a new tab)

  2. Exploratory study of the turning characteristics of a Coanda-operated jet-flap

    An exploratory investigation of the jet deflection characteristics of a jet-flapped airfoil with Coanda deflection surfaces was performed. Velocity distribution and flow angle measurements were made with the jet-flap in static operation. Flow visualization tests were used to determine the turning …

    nps Repository record for Exploratory study of the turning characteristics of a Coanda-operated jet-flap (opens in a new tab)

  3. An experimental and theoretical investigation concerning the aeroacoustic characteristics of the rough jet flap

    … investigation was to determine the effect of flap surface roughness on the aeroacoustic characteristics of jet flap type exhaust flows. Tests s were made in the free field and the reverberation chamber. Using an expression derived by Lilley, a mathematical model was developed to describe the …

    ut-knoxville Repository record for An experimental and theoretical investigation concerning the aeroacoustic characteristics of the rough jet flap (opens in a new tab)

  4. Smoke and helium bubble visualization studies of incompressible flow past a jet-flap airfoil

    An exploratory study was performed on a jet-flapped airfoil in the Low Speed Flow Visualization Facility at the Naval Postgraduate School, Monterey, California. the purpose of this study was to evaluate the test facility for future work and to compare an old and a relatively new flow visualization …

    nps Repository record for Smoke and helium bubble visualization studies of incompressible flow past a jet-flap airfoil (opens in a new tab)

  5. The feasibility of the jet-flap rotor as a lift generator for vertical takeoff and landing aircraft

    … first the determine the effectiveness of the jet-flap rotor relative to other lift generators, and second to examine the potential effectiveness of the jet-flap rotor in a tactical VTOL aircraft. I was found that the jet-flap has a high theoretical potential, but it at present is the …

    nps Repository record for The feasibility of the jet-flap rotor as a lift generator for vertical takeoff and landing aircraft (opens in a new tab)

  6. Acoustic source location in a jet-blown flap using a cross-correlation technique

    … an attempt to locate the acoustic sources in a jet-blown flap (jet-flap) are presented. The method employed was a direct correlation technique which is based upon the theoretical work of Curle. The acoustic source strength distribution in the turbulent flow field was measured for two far-field …

    utk-theses Repository record for Acoustic source location in a jet-blown flap using a cross-correlation technique (opens in a new tab)

  7. Air Jets for Lift Control in Low Reynolds Number Flow

    … fluctuations with blade pitching or mechanical flaps is limited by the speed of actuation. The objective was to investigate using jet-flap-like fluidic actuators on the 'suction surface' of an aerofoil for rapid aerodynamic control. A NACA 0025 aerofoil was constructed for wind-tunnel …

    waterloo Repository record for Air Jets for Lift Control in Low Reynolds Number Flow (opens in a new tab)

  8. Flow control via synthetic jet actuation

    … undertaken to determine the ability of Synthetic Jet Actuators to control the aerodynamic properties of a wing. The Synthetic Jet Actuator (SJA) was placed at two separate positions on a wing comprised of a NACA0015 airfoil. The first of the jet positions is located at 12% of the chord, hereby …

    tamu Repository record for Flow control via synthetic jet actuation (opens in a new tab)

  9. Aero-propulsive characteristics of an overwing distributed electric propulsion system with vectored thrust

    … of the vectored nozzle system in producing a jet-flap system, with varying induced circulation effects brought about by control of the nozzle deflection angle and the fan tip speed ratio.

    uiuc Repository record for Aero-propulsive characteristics of an overwing distributed electric propulsion system with vectored thrust (opens in a new tab)

  10. Application of active flow control technology in an unmanned aerial vehicle

    … edge pulsed blowing and the trailing edge jet blowing/ Gurney flap on the improvement of aerodynamic performance of an unmanned aerial vehicle at low Reynolds numbers. The wind tunnel tests for the leading edge pulsed jet blowing were conducted at 10%, 30% and 50% location of the chord …

    tamu Repository record for Application of active flow control technology in an unmanned aerial vehicle (opens in a new tab)

  11. Aeroacoustic interactions of installed subsonic round jets

    … sources include: (1) reflection of the exhaust jet mixing noise from the underside of the wing, and (2) interaction between the turbulent jet plume and the trailing edge of the wing, or deployed flap. The strength, directivity and frequency content of these particular sources all serve to …

    soton Download PDF for Aeroacoustic interactions of installed subsonic round jets (opens in a new tab)

  12. Numerical Assessment of the Performance of Jet-Wing Distributed Propulsion on Blended-Wing-Body Aircraft

    … a duct to spread out the exhaust flow to form a jet-wing or by using many small engines spaced along the span of the wing. Jet-wing distributed propulsion was originally suggested by Kuchemann as a way to improve propulsive efficiency. In addition, one can envision a jet-wing with deflected jets …

    vt Repository record for Numerical Assessment of the Performance of Jet-Wing Distributed Propulsion on Blended-Wing-Body Aircraft (opens in a new tab)

  13. The Multidisciplinary Design Optimization of a Distributed Propulsion Blended-Wing-Body Aircraft

    … to explain this. The formulation showed that the jet "fills in" the wake behind the body, improving the overall aerodynamic/propulsion system, resulting in an increased propulsive efficiency. The distributed propulsion concept also replaces the conventional elevons with a vectored thrust system …

    vt Repository record for The Multidisciplinary Design Optimization of a Distributed Propulsion Blended-Wing-Body Aircraft (opens in a new tab)

  14. Numerical Studies of Jet-Wing Distributed Propulsion and a Simplified Noise Metric Method

    … of engine and aircraft. This concept is the jet-wing distributed propulsion idea, which redistributes the thrust across the span of the wings. Distributed propulsion is accomplished by using many smaller engines spread across the wings or several large engines to duct the exhaust flow in a …

    vt Repository record for Numerical Studies of Jet-Wing Distributed Propulsion and a Simplified Noise Metric Method (opens in a new tab)