Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Johnson–Cook model"”.
-
Finite element modeling of the behavior of armor materials under high strain rates and large strains
… high strain rates and large strains, using the Johnson-Cook visco-plastic model, while incorporating the formation of adiabatic shear bands. The model was then to be applied to three armor metals, namely maraging steel 300, high hardness armor (HHA), and aluminum alloy 5083-H131; supplied by the …
-
MODELING RATE DEPENDENT DURABILITY OF LOW-Ag SAC INTERCONNECTS FOR AREA ARRAY PACKAGES UNDER TORSION LOADS
The thesis discusses modeling rate-dependent durability of solder interconnects under mechanical torsion loading for surface mount area array components. The study discusses an approach to incorporate strain-rate dependency in durability estimation for solder interconnects. The components under …
-
Finite element analysis of failure modes in dynamically loaded pre-cracked steel plates
… of the notch ligament. The computations employed Johnson - Cook model which takes into account strain hardening, strain-rate hardening and thermal softening. An approximate solution of the governing equations is sought by using an explicit finite element code DYNA2D. We analyzed the evolution of …
-
Large strain computational modeling of high strain rate phenomena in perforating gun devices by Lagrangian/Eulerian FEM simulations
… Particular reference is made to the modeling of metallic materials, although other kinds of materials are considered as well. The work may be divided into three main parts. The first part of the work consists in a critical review of the constitutive modeling of materials subjected to …
-
Thermomechanical simulation and process optimization for hot rolling of steel
… accurately, it is essential that the material model for steel accounts for the viscoplasticity and changes in properties that occur in steel at elevated temperatures as grain growth and recrystallization. The healing of existing voids during hot rolling was investigated using finite element …
-
Development of 2D-Machining Test for Assessing Material Properties in Metal Cutting
… on efficient machining it is important to model/simulate the machining process to be able to design the machining process without or with minimum amount of pre-tests. Another goal is to have safe and robust production processes involving new materials in the manufacturing. This places high …
-
Development of a high resolution computational model of adiabatic shear banding in machining
… high-resolution finite element analysis (FEA) to model machining under conditions that produce adiabatic shear banding (ASB). The simulation assumes the deforming material behaves following Johnson-Cook constitutive models and implements an adaptive re-meshing algorithm. The model implements a …
-
Development of Methods to Evaluate Dynamic Fracture Toughness of Metallic Materials at Very High Loading Rates Under Limited Plastic Deformation Conditions
… the FEM simulations. The ductile and damage model parameters were determined from experimental data using the Johnson-Cook model. Analytical solutions were also implied through the application of irreversible thermodynamics of dislocation evolution to predict the stress-strain curve at an …
-
PREDICTION OF SUBSURFACE DAMAGE DURING MACHINING NICKEL-BASED SUPERALLOYS
… specifically targets the development of a model to predict subsurface damage during the machining of ã'-strengthened nickel-based superalloys. To accomplish this, a modified Johnson-Cook model is developed to represent the plasticity behavior of the material using elevated temperature …
-
Analytical modeling of material constitutive behaviors and process mechanics in precision machining and additive manufacturing
… and functionality. Physics-based analytical modeling methodology allows process planning and optimization because of the significant computational advantage without resorting to the finite element method or any iteration-based simulations. However, the analytical models are not readily …
-
Gas gun studies of armature-rail interface wear effects
… The approach involved developing constitutive models for armature materials (aluminum 6061) as well as oxygen-free high-thermal conductivity copper as the rail material. Taylor rod-on-anvil impact experiments were performed to validate the accuracy of constitutive strength models by correlating …
-
Machining of additively manufactured titanium Ti-6Al-4V; cutting forces and chip morphology
… (AM) titanium Ti-6Al-4V and presents a model to determine Johnson Cook (J-C) constitutive parameters from complex machining processes through numerical modeling and experimental validation. The J-C parameters are important in describing the characteristics and behaviors of materials …
-
Tensile High Strain Rate Behavior of AZ31B Magnesium Alloy Sheet
… experimental data was fit to three constitutive models: the Johnson-Cook model, its modified version with a Cowper-Symonds strain rate sensitivity formulation, and the Zerilli-Armstrong model. The three models were evaluated by numerical simulation of the TSHB experiment under various testing …
-
A Thermal-Mechanical Finite Element Analysis of Orthogonal Cutting for Normalized Steels
… orthogonal cutting of normalized steels. The Johnson-Cook cook material and damage parameters are utilized to define the behavior and failure of the material. Four cases are simulated with workpiece materials of A2024-T351, AISI 1045, AISI 4140, and AISI 9310. The numerical results include the …
-
NUMERICAL MODELING OF MECHANICAL RECOVERY IN DAMAGEDCONCRETE REPAIRED BY EPOXY AT MOLECULAR AND METRIC SCALES
… of the thesis presents Molecular Dynamics (MD) models of concrete/epoxyinterfaces. We focus on High Molecular Weight Methacrylate (HMWM), which is anepoxy resin commonly used in construction. We first propose an MD procedure to buildcross-linked HMWM. The MD model can reproduce the mass density …
-
Characterizing and Modelling the Strain Rate-Dependent Constitutive Response of a Unidirectional Non-Crimp Fabric Composite Material
… physical and virtual experiments. A constitutive model is also developed and implemented for predicting the strain rate-dependent pre-peak deformation response of the same material system. The anisotropic strain rate-dependent deformation and failure response of the UD-NCF carbon fiber/snap-cure …
-
COMPUTATIONAL MODELING OF THE FRICTION STIR WELDING (FSW) PROCESS AND OF THE PERFORMANCE OF FSW JOINTS
… flow and stirring/mixing: Within the numerical model of the FSW process, the FSW tool is treated as a Lagrangian component while the workpiece material is treated as a Eulerian component. The employed coupled Eulerian/Lagrangian computational analysis of the welding process was of a two-way …
-
Modelování mechanického chování uhlíkových ocelí za vysokých rychlostí deformace
… sloužila k určení konstant materiálového modelu Johnson-Cook. Validace modelů pro jednotlivé směry byla provedena pomocí metody konečných prvků v softwaru Ansys. Výstupem práce je zhodnocení přesnosti vytvořeného materiálového modelu a rovněž doporučení pro výrobu součástí karoserie …
-
Mechanické chování oceli Strenx za vysokých rychlostí deformace
… byly stanoveny materiálové konstanty pro model Johnsona a Cooka a jeho spolehlivost byla srovnána jak s výsledky z kvazistatické, tak z dynamické zkoušky. Hodnoty vypočtené pomocí materiálového modelu dosahovaly uspokojivé přesnosti a vytvořený model lze považovat za spolehlivý.
Page 1 of 2