Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 100 for “"Johnson Cook"”.

  1. On the characterization of Johnson-Cook constants : numerical and experimantal study of high speed machining aerospace alloys

    … materials. The most commonly used one is that of Johnson and Cook (JC) which combines the effect of strains, strain rates, and temperatures. The determination of the material constants of JC under high strains, strain rates, and temperatures during machining conditions has long been a major …

    ets-quebec Download PDF for On the characterization of Johnson-Cook constants : numerical and experimantal study of high speed machining aerospace alloys (opens in a new tab)

  2. On the dynamic response of additively manufactured 316L stainless steel and the development of an orthotropic Johnson-Cook viscoplastic strength model

    … strength model combining the widely used Johnson-Cook strength model with a numerical routine harnessing abstract deviatoric stress eigenspaces to improve computational efficiency was developed. This model seeks to address limitations of already implemented alternatives that either offer …

    oxford Repository record for On the dynamic response of additively manufactured 316L stainless steel and the development of an orthotropic Johnson-Cook viscoplastic strength model (opens in a new tab)

  3. CALIBRATION OF THE JOHNSON-COOK FAILURE PARAMETERS AS THE CHIP SEPARATION CRITERION IN THE MODELLING OF THE ORTHOGONAL METAL CUTTING PROCESS

    … thesis introduces a calibration method of the Johnson-Cook fracture parameters used in the orthogonal metal cutting modelling with a positive rake angle for AISI 1045 steel. These fracture parameters were obtained based on a set of quasi-static tensile tests, with smooth and pre-notched round …

    mcmaster Repository record for CALIBRATION OF THE JOHNSON-COOK FAILURE PARAMETERS AS THE CHIP SEPARATION CRITERION IN THE MODELLING OF THE ORTHOGONAL METAL CUTTING PROCESS (opens in a new tab)

  4. Finite element modeling of the behavior of armor materials under high strain rates and large strains

    … high strain rates and large strains, using the Johnson-Cook visco-plastic model, while incorporating the formation of adiabatic shear bands. The model was then to be applied to three armor metals, namely maraging steel 300, high hardness armor (HHA), and aluminum alloy 5083-H131; supplied by the …

    manitoba Repository record for Finite element modeling of the behavior of armor materials under high strain rates and large strains (opens in a new tab)

  5. MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS

    … pressure bar tests of SLMed 316L to identify Johnson-Cook constitutive model constants; quasi-static tensile mechanical response and split-Hopkinson tensile bar tests to identify dynamic damage model constants for SLMed 316L stainless steel; experiments of the micro machining process to study …

    nus Repository record for MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS (opens in a new tab) Download file for MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS (opens in a new tab)

  6. Finite Element Modelling of the Small Punch Test for Structure Critical Design

    … was used as a basis for the optimisation of Johnson-Cook materials and damage model parameters of P91 and Eurofer97 steels at room temperature. An effective method for the optimisation of the Johnson-Cook materials model parameters was developed. This method utilised the scripting …

    whiterose Download PDF for Finite Element Modelling of the Small Punch Test for Structure Critical Design (opens in a new tab)

  7. Napěťově-deformační analýza zadní nápravy automobilu při nárazu do překážky

    … a polohou nárazu, vrátene kalibrácie modelov Johnson–Cook plasticity a tvárneho lomu. Následne boli výsledky porovnané s cieľom určiť vplyv na možnú iniciáciu trhliny. Neskôr bolo prezentované porovnanie nakalibrovaného Johnson–Cook modelu s podobným modelom získaným z dostupnej literatúry. …

    brno-tech Repository record for Napěťově-deformační analýza zadní nápravy automobilu při nárazu do překážky (opens in a new tab)

  8. Development of a high resolution computational model of adiabatic shear banding in machining

    … assumes the deforming material behaves following Johnson-Cook constitutive models and implements an adaptive re-meshing algorithm. The model implements a fully thermo-mechanically coupled solver to calculate heat conduction inside the deforming specimen and cutting tool. The FEA is used to study …

    wichita-thes Repository record for Development of a high resolution computational model of adiabatic shear banding in machining (opens in a new tab)

  9. Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using HyperMesh/RADIOSS

    … used for representing the Aluminum alloy tank is Johnson Cook (LAW2 in RADIOSS). This report explains the process of obtaining the Johnson Cook parameters from the stress strain curve and applying them in RADIOSS. This report also discusses other important simulation parameters like co-efficient …

    mtu Repository record for Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using HyperMesh/RADIOSS (opens in a new tab)

  10. ULTRA-HIGH STRAIN RATE CONSTITUTIVE MODELING OF PURE TITANIUM USING PARTICLE IMPACT TEST

    … impacts using two constitutive equations: Johnson-Cook and Zerilli-Armstrong. We show that titanium microparticles experience strain rates in the range of 10^6-10^10 s^-1 upon impact. We evaluate the capability of the Johnson-Cook and Zerilli-Armstrong equations in predicting material …

    cornell Repository record for ULTRA-HIGH STRAIN RATE CONSTITUTIVE MODELING OF PURE TITANIUM USING PARTICLE IMPACT TEST (opens in a new tab)

  11. Determination of material constitutive models using orthogonal machining tests

    … of present research is to fine-tune and improve Johnson-Cook (JC) constitutive model parameters for American Iron and Steel Institute (AISI) 1045 carbon steel and Oxygen-free high conductivity (OFHC) copper using orthogonal machining tests. This dissertation is divided into two parts. Part one is …

    wichita-thes Repository record for Determination of material constitutive models using orthogonal machining tests (opens in a new tab)

  12. Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling

    … to predict high strain rate behavior using the Johnson-Cook material model was evaluated. Numerical modeling and parameter optimization were performed in LS-DYNA and LS-OPT, respectively. The results showed reasonable agreement between the experiments and simulations for hydraulic compressive …

    chalmers Repository record for Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling (opens in a new tab)

  13. Simulace obráběcích operací pomocí explicitní MKP

    … jeho popis podľa materiálového modelu plasticity Johnson-Cook. Posledná časť práce sa zaoberá analýzou matematických prístupov využívaných v MKP a simuláciou obrábacieho procesu pri zvolených rezných podmienkach.

    brno-tech Repository record for Simulace obráběcích operací pomocí explicitní MKP (opens in a new tab)

  14. Material Models for Simulation of Steel Hot Rolling Process using Experimentally Determined Properties at Elevated Temperatures and Strain Rates

    … temperatures and at different strain rates. Johnson-Cook viscoplastic model was calibrated using experimental stress-strain curves. Static softening model was developed at varying interpass times, pre-strains, temperatures, and strain rates. Subroutine to include developed viscoplasticity and …

    must-thes Repository record for Material Models for Simulation of Steel Hot Rolling Process using Experimentally Determined Properties at Elevated Temperatures and Strain Rates (opens in a new tab)

  15. Large strain computational modeling of high strain rate phenomena in perforating gun devices by Lagrangian/Eulerian FEM simulations

    … interest is addressed to reviewing the so-called Johnson-Cook strength model, by critically highlighting its positive and negative aspects. One of the main tackled issue consists in a reasoned assessment of the various procedures adoptable in order to calibrate the parameters of the model. This …

    trento Repository record for Large strain computational modeling of high strain rate phenomena in perforating gun devices by Lagrangian/Eulerian FEM simulations (opens in a new tab)

  16. Modelování mechanického chování uhlíkových ocelí za vysokých rychlostí deformace

    … sloužila k určení konstant materiálového modelu Johnson-Cook. Validace modelů pro jednotlivé směry byla provedena pomocí metody konečných prvků v softwaru Ansys. Výstupem práce je zhodnocení přesnosti vytvořeného materiálového modelu a rovněž doporučení pro výrobu součástí karoserie automobilu na …

    brno-tech Repository record for Modelování mechanického chování uhlíkových ocelí za vysokých rychlostí deformace (opens in a new tab)

  17. Experimental Study And Modeling Of Mechanical Micro-machining Of Particle Reinforced Heterogeneous Materials

    … models include constant fracture strain, Johnson-Cook, Johnson-Cook coupling criterion, Wilkins, modified Cockcroft-Latham, and Bao-Wierzbicki fracture criterion. By means of a user material subroutine (VUMAT), these fracture models are implemented into a Finite Element (FE) orthogonal …

    ucf Repository record for Experimental Study And Modeling Of Mechanical Micro-machining Of Particle Reinforced Heterogeneous Materials (opens in a new tab)

  18. Vliv aditivní technologie a rychlosti deformace na mechanické vlastnosti materiálů

    … byl popis plasticity proveden pomocí modelu Johnson-Cook. Sestavené materiálové modely pro různé orientace tištěných vrstev vůči směru působícího zatížení byly následně ověřeny prostřednictvím numerické simulace Hopkinsonova tlakového testu. Výsledky ověření shody mezi experimentálně získanou …

    brno-tech Repository record for Vliv aditivní technologie a rychlosti deformace na mechanické vlastnosti materiálů (opens in a new tab)

  19. Aplikace modelů tvárného porušování při výpočtové simulaci technologických operací

    … (kritérium ekvivalentního lomového přetvoření a Johnson-Cook) na výpočtovou simulaci technologické operace střih. Výpočty byly provedeny v programovém systému ABAQUS/Explicit 6.5.1 a k jejich verifikaci byl proveden experiment.

    brno-tech Repository record for Aplikace modelů tvárného porušování při výpočtové simulaci technologických operací (opens in a new tab)

  20. Characterization of microstructure and high strain rate deformation response of C250 maraging steel fabricated by directed energy deposition process

    … heat treatment. Modifications are made to the Johnson-Cook constitutive models to predict the dynamic deformation behaviors of as-deposited and heat-treated DED-Arc C250 alloy, respectively. These modifications consider the variable thermal softening effects and coupled effects of strain rate …

    manitoba Repository record for Characterization of microstructure and high strain rate deformation response of C250 maraging steel fabricated by directed energy deposition process (opens in a new tab)

Page 1 of 5