Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Joint Angle Estimation"”.

  1. Joint Angle Estimation Method for Wearable Human Motion Capture

    … method was validated for the elbow and shoulder joints with data from two garments with resistive, thread-based sensors sewn into the garments at multiple locations. The proposed method was able to estimate the elbow joint position with an average error of 2.2 degrees. The method also produced an …

    vt Repository record for Joint Angle Estimation Method for Wearable Human Motion Capture (opens in a new tab)

  2. Vision Based Joint Angle Estimation of Robotic Plasma Medicine Devices

    This study proposes a vision-based algorithm for joint angle estimation of robotic plasma medicine devices with a steerable tip joint. The algorithm uses ArUco markers of size 4x4 because of their robust and fast detection. An ArUco marker with a square length of 9mm is attached to each of the …

    tamu Repository record for Vision Based Joint Angle Estimation of Robotic Plasma Medicine Devices (opens in a new tab)

  3. ResCoCo: Residual ConvLSTM Network with Contrastive Learning for 3D Joint Angle Estimation

    3D joint angle is an important indicator in human gait analysis, and musculoskeletal disease diagnosis and treatment. To accurately estimate 3D joint angle, a Deep Learning approach, Residual ConvLSTM network with Contrastive Learning (ResCoCo), is proposed in this study. A sequence shortening …

    mcmaster Repository record for ResCoCo: Residual ConvLSTM Network with Contrastive Learning for 3D Joint Angle Estimation (opens in a new tab)

  4. Influence of camera orientation on joint-angle estimation using single-camera 2D and 3D markerless motion capture

    Deep learning-based single-camera video pose estimation algorithms have shown promise for enabling large-scale movement studies in real-world environments, free from the limitations associated with marker-based and multi-camera markerless motion capture systems. However, there is limited research …

    ubc Repository record for Influence of camera orientation on joint-angle estimation using single-camera 2D and 3D markerless motion capture (opens in a new tab) Download PDF for Influence of camera orientation on joint-angle estimation using single-camera 2D and 3D markerless motion capture (opens in a new tab)

  5. Comparison of IMU-based elbow joint angle estimation methods for improved clinical assessment of spasticity and rigidity

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2024-03-01 without embargo terms

    uiuc Repository record for Comparison of IMU-based elbow joint angle estimation methods for improved clinical assessment of spasticity and rigidity (opens in a new tab)

  6. An inertial sensor-based Motion capture pipeline for movement analysis

    … have appeared and boosted the development of joint angle estimation methods. At present, the utilization of musculoskeletal models has enabled biomedical communities to calculate joint angles by applying a standard protocol. However, it costs great expense when we try to develop a human motion …

    birmingham Download PDF for An inertial sensor-based Motion capture pipeline for movement analysis (opens in a new tab)

  7. Design and Development of a Novel Sensorized Orthosis for Orthopedic Rehabilitation

    … two six-axis IMUs were employed to measure knee joint angle and motion dynamics in real time. The embedded controller, based on an ESP32-S3 microcontroller, supports high-frequency data acquisition, local microSD logging, and wireless communication with the ROS 2 framework, enabling both offline …

    chalmers Repository record for Design and Development of a Novel Sensorized Orthosis for Orthopedic Rehabilitation (opens in a new tab)

  8. An indirect method for non-contact sensing of robot joint angles using accelerometers with automatic in-situ calibration

    … self-calibrating, easy to install, and robust joint angle sensing method is presented in this thesis. The approach is based on the use of a pair of accelerometers placed on each link near the joint axis. Two different methods are described for automatic, in-situ, integrated calibration of the …

    ubc Repository record for An indirect method for non-contact sensing of robot joint angles using accelerometers with automatic in-situ calibration (opens in a new tab) Download PDF for An indirect method for non-contact sensing of robot joint angles using accelerometers with automatic in-situ calibration (opens in a new tab)

  9. Bio-Inspired Tensegrity Mechanisms for Mimicking Musculoskeletal Behavior and Proprioceptive Sensing

    … (3) Actuated Tensegrity Revolute (AcTR) joint is inspiredby the bio-mechanics of the ankle and knee. It is able to passively react to the externalenvironment like the ankle or knee while continuing to operate effectively during variableloading.The vestibular system inspired non-contact …

    alabama Repository record for Bio-Inspired Tensegrity Mechanisms for Mimicking Musculoskeletal Behavior and Proprioceptive Sensing (opens in a new tab)

  10. Automated Rehabilitation Exercise Motion Tracking

    … This thesis proposes a method to recover patient joint angles and automatically extract movement profiles utilizing small and lightweight body-worn sensors. Joint angles are estimated from sensor measurements via the extended Kalman filter (EKF). Constant-acceleration kinematics is employed as the …

    waterloo Repository record for Automated Rehabilitation Exercise Motion Tracking (opens in a new tab)

  11. Robust Real-Time Model Predictive Control for High Degree of Freedom Soft Robots

    … to large-scale soft robots because their many joints and pressures constitute a high-DoF system and their inherit softness makes them difficult to model accurately. First a joint-angle estimation and kinematic calibration method for soft robots is developed which is shown to decrease the pose …

    byu Repository record for Robust Real-Time Model Predictive Control for High Degree of Freedom Soft Robots (opens in a new tab) Download PDF for Robust Real-Time Model Predictive Control for High Degree of Freedom Soft Robots (opens in a new tab)

  12. The Feasibility of Wearable Sensors for the Automation of Distal Upper Extremity Ergonomic Assessment Tools

    … The purpose of this work was to evaluate the joint angle estimation of IMUs and the relationship between sEMG and overall task intensity throughout a controlled wrist motion. Using a 3 degrees-of-freedom wrist manipulandum, the feasibility of a small, lightweight wearable was evaluated to …

    brock Repository record for The Feasibility of Wearable Sensors for the Automation of Distal Upper Extremity Ergonomic Assessment Tools (opens in a new tab)

  13. Towards Naturalistic Biomechanical Studies of Occupational Activities: Subject-Specific Modeling, Novel Sensing, and Machine Learning

    … passive back exoskeletons significantly altered joint kinematics and kinetics in a task-dependent manner, with marked sex-related differences, underscoring the necessity of individualized assessment for assistive device implementation. Study Two extended biomechanical modeling capabilities to …

    tamu Repository record for Towards Naturalistic Biomechanical Studies of Occupational Activities: Subject-Specific Modeling, Novel Sensing, and Machine Learning (opens in a new tab) Embargoed until 2028-05-01

  14. Workforce fatigue prediction via wearable sensor data analytics

    … and allowing the model to account for multi-joint dynamics, and therefore different tasks, and inter-individual variability. The system developed to validate the SAFE framework comprises of inertial measurement units, pressure insoles, and a custom MATLAB application to continuously refine …

    cork Repository record for Workforce fatigue prediction via wearable sensor data analytics (opens in a new tab)

  15. Subject-Specific Assistive Control of a Stroke Rehabilitation Robot

    … used to estimate the user’s shoulder and elbow joint torques, using real-time kinematic data. To obtain this real-time kinematic data without physically placing sensors/markers on the user, a system of two equations (which defined the user’s planar arm model in terms of their shoulder and elbow …

    waterloo Repository record for Subject-Specific Assistive Control of a Stroke Rehabilitation Robot (opens in a new tab)