Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 132 for “"Joint Strength"”.

  1. Study of composite joint strength with carbon nanotube reinforcement

    Strengthening of composite joints is a topic of recent research. The benefits of using locally applied carbon nanotubes to reinforce a carbon fiber composite joint were studied. The effect of carbon nanotubes on enhancing the fracture toughness and joint interface strength was investigated by …

    nps Repository record for Study of composite joint strength with carbon nanotube reinforcement (opens in a new tab)

  2. The effect of dowel diameter and dowel penetration on joint strength

    Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Forest Products, 1959

    msu Repository record for The effect of dowel diameter and dowel penetration on joint strength (opens in a new tab)

  3. Co-cured composite joint strength investigation based on behavior characterization of [0/±θ/90]s family

    Joints provide a path for transfer of load and are important components in an assembly of structures, particularly in translating joint strength improvements directly to significant cost savings. This cost savings is more evident in composite joints since manufacturing of more complex single piece …

    gatech Repository record for Co-cured composite joint strength investigation based on behavior characterization of [0/±θ/90]s family (opens in a new tab)

  4. Modeling the Effects of Parameter Changes on Heating and Pressure at the Weld Interface and Joint Strength in Friction Bit Joining

    … structure is important. However, creating strong joints between dissimilar metals can be challenging. Friction bit joining (FBJ) is a solid-state method that uses a consumable bit to create a strong joint between dissimilar metals such as aluminum and steel. The purpose of this research is to gain …

    byu Repository record for Modeling the Effects of Parameter Changes on Heating and Pressure at the Weld Interface and Joint Strength in Friction Bit Joining (opens in a new tab) Download PDF for Modeling the Effects of Parameter Changes on Heating and Pressure at the Weld Interface and Joint Strength in Friction Bit Joining (opens in a new tab)

  5. Fusion bonding of reinforced thermoplastic

    … laboratory technique developed to produce fusion joints under carefully controlled conditions is described The technique was used to manufacture single-lap specimens from the reinforced thermoplastic APC-2, and the influence of processing temperature and surface degreasing on joint strength is …

    glasgow Download PDF for Fusion bonding of reinforced thermoplastic (opens in a new tab)

  6. Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel

    … materials such as hot stamped ultra-high strength steel (UHSS), but requires new joining solutions for integration in future multi-material structures. Structural adhesives enable multi-material joining, and have been used to enhance the joint performance for mono-material structures to …

    waterloo Repository record for Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel (opens in a new tab)

  7. Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075

    … lightweight metals to be joined to advanced high-strength steels (AHSS). Joining of dissimilar metals is especially beneficial to the automotive industry because of the desire to use materials such as aluminum and AHSS in order to reduce weight and increase fuel efficiency. In this study, FBJ was …

    byu Repository record for Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075 (opens in a new tab) Download PDF for Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075 (opens in a new tab)

  8. Surface treatment of titanium alloys for adhesive bonding

    … treatments of two titanium alloys on adhesive joint strength over a wide range of temperatures using two commercial adhesives. The literature surveyed is divided into two. The first deals with the metallography and surface chemistry of titanium and its alloys; while the second deals with …

    city-london Download PDF for Surface treatment of titanium alloys for adhesive bonding (opens in a new tab)

  9. The effects of carbon nanotube reinforcement on adhesive joints for naval applications

    The adhesive joint strength of various carbon fiber composite and steel joints was studied using Mode II fracture strength testing. The effect of the addition of multi-walled carbon nanotubes (MWNTs) to the adhesive was also studied. The effects of the MWNTs' diameter, length, concentration and …

    nps Repository record for The effects of carbon nanotube reinforcement on adhesive joints for naval applications (opens in a new tab)

  10. Měření pevnosti pájeného spoje

    Solder joint, strength, measurement, SMD, THT

    brno-tech Repository record for Měření pevnosti pájeného spoje (opens in a new tab)

  11. Static strength of thick-walled CHS joints and global frame behavior

    … detail investigations conducted on the static strength of thick-walled Circular Hollow Section (CHS) joints with the objective to develop a nonlinear joint model for the ultimate strength analysis of 3D jacket type structures. Four types of uni-planar CHS joints are studied, with careful …

    nus Repository record for Static strength of thick-walled CHS joints and global frame behavior (opens in a new tab) Download file for Static strength of thick-walled CHS joints and global frame behavior (opens in a new tab)

  12. Process optimization of Gas Metal Arc Brazing technology

    … joining of thin-gauge Zn-coated advanced high strength steels (AHSSs) employed in the automotive industry. Due to its lower heat input capability, the technology offers several benefits over the conventional gas-metal-arc welding (GMAW) process such as minimal Zn-coating burn-off, lower …

    waterloo Repository record for Process optimization of Gas Metal Arc Brazing technology (opens in a new tab)

  13. The selection of adhesives and composite matrix resins for aircraft repairs

    … limitations. The aspects studied were tensile strength, tensile modulus, elongation at failure, fracture energy, compression strength, compression modulus, water uptake, Tg dry and we t and diffusion coefficient. A computer programme written at Leicester Polytechnic was adapted to suit an IBM …

    city-london Download PDF for The selection of adhesives and composite matrix resins for aircraft repairs (opens in a new tab)

  14. A biomechanical investigation into the link between simulated job static strength and psychophysical strength: Do they share a “weakest link” relationship?

    … of whole body balance, shoe-floor friction and joint strength in limiting the capacity of a person to produce maximum voluntary hand forces and psychophysically acceptable hand forces. The underlying goal was to advance knowledge regarding how physical exertion capacity is biomechanically …

    waterloo Repository record for A biomechanical investigation into the link between simulated job static strength and psychophysical strength: Do they share a “weakest link” relationship? (opens in a new tab)

  15. Weldability of Titanium Molybdenum Alloy Archwires

    … for welding Titanium Molybdenum Alloy Archwires. Joint strength measurements, cold bend tests, and close-up photography of welded wire specimens were performed to establish the optimum welding conditions. Results of this study might be used to reduce the incidence of welding failures and to …

    marquette Repository record for Weldability of Titanium Molybdenum Alloy Archwires (opens in a new tab)

  16. Friction Bit Joining of Dissimilar Combinations of GADP 1180 Steel and AA 7085 – T76 Aluminum

    … used to join lightweight metals to advanced high-strength steels (AHSS). The automotive industry is experiencing pressure to improve fuel efficiency in their vehicles. The use of AHSS and aluminum will reduce vehicle weight which will assist in reducing fuel consumption. Previous research achieved …

    byu Repository record for Friction Bit Joining of Dissimilar Combinations of GADP 1180 Steel and AA 7085 – T76 Aluminum (opens in a new tab) Download PDF for Friction Bit Joining of Dissimilar Combinations of GADP 1180 Steel and AA 7085 – T76 Aluminum (opens in a new tab)

  17. Low temperature Cu-Cu bonding by sintering Cu nanoparticles for power electronics

    … The proposed method produces high sintered Cu joint strength of over 20 MPa but without the need for pressurized sintering or protective gas atmospheres. Meanwhile, this thesis employs a quasi-in-situ method combining scanning electron microscopy (SEM) observation and ion beam etching to …

    kings Repository record for Low temperature Cu-Cu bonding by sintering Cu nanoparticles for power electronics (opens in a new tab) Download PDF for Low temperature Cu-Cu bonding by sintering Cu nanoparticles for power electronics (opens in a new tab)

  18. Relationships among arm strength, wrist release, and joint torques during the golf downswing

    … of body segment dynamics and interactions with strength boundaries on the coordination of the golf swing is crucial for improving swing performance and the design of effective training plans. We quantified kinematics of eight elite golfers performing normal golf swings, and simulated optimal …

    texas Repository record for Relationships among arm strength, wrist release, and joint torques during the golf downswing (opens in a new tab)

Page 1 of 7