Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Joint Time Frequency Analysis"”.

  1. Joint time-frequency analysis and filtering of single trial event-related potentials.

    … an event-related potential is typically several times less than the background EEG. The background EEG has the effect of obscuring the ERP and therefore appropriate signal processing is required for its recovery. Traditionally ERPs are estimated using the synchronised averaging of several single …

    sheffield-hallam Download PDF for Joint time-frequency analysis and filtering of single trial event-related potentials. (opens in a new tab)

  2. Comprehensive Joint Time-Frequency Analysis Toward Condition Based Maintenance Regimes for Electrical and Mechanical Components

    Based upon a framework of time-frequency analysis, we outline condition based maintenance (CBM), or maintenance only upon evidence of need, for both electrical and mechanical systems. We apply novel time-frequency cross-correlation metrics to helicopter drivetrain systems and electrical cables as …

    south-carolina Repository record for Comprehensive Joint Time-Frequency Analysis Toward Condition Based Maintenance Regimes for Electrical and Mechanical Components (opens in a new tab)

  3. Theory and Application of Joint Time-Frequency Analysis On Health Monitoring of Electric Cable and Guided-Waves Detection of Structural Corrosion

    … and save repair expenses. In both applications, joint time-frequency analysis is found to be an effective tool. The Joint Time-Frequency Domain Reflectometry (JTFDR) which is based on time-frequency cross-correlation function is applied to health monitoring of XLPE, EPR and SIR insulated cables …

    south-carolina Repository record for Theory and Application of Joint Time-Frequency Analysis On Health Monitoring of Electric Cable and Guided-Waves Detection of Structural Corrosion (opens in a new tab)

  4. Dynamic analysis of civil engineering structures using joint time-frequency methods

    The study of signals whose frequency content changes in time is prevalent in many academic fields. The objective of this thesis is to demonstrate that joint time-frequency analysis is suitable for the analysis of civil engineering vibration data. A discussion of different joint time-frequency …

    ubc Repository record for Dynamic analysis of civil engineering structures using joint time-frequency methods (opens in a new tab) Download PDF for Dynamic analysis of civil engineering structures using joint time-frequency methods (opens in a new tab)

  5. Fault assessment of a diesel engine using vibration measurements and advanced signal processing

    … cycle analyzer. Extensive steady state and time resolved instrumentation were installed along with a highspeed data acquisition system to obtain cylinder pressure and engine vibration data. High frequency response accelerometers were mounted on the cylinder head assembly to measure phase …

    nps Repository record for Fault assessment of a diesel engine using vibration measurements and advanced signal processing (opens in a new tab)

  6. Assessment of diesel engine condition using time resolved measurements and signal processing

    … Detroit 3-53 engine was heavily instrumented for time resolved measurements. In particular, a 3,600 count per revolution optical encoder was used along with accelerometers mounted on various engine structures, in-cylinder pressure measurements and a variety of steady state sensors, such as exhaust …

    nps Repository record for Assessment of diesel engine condition using time resolved measurements and signal processing (opens in a new tab)

  7. CAE Methods on Vibration-Based Health Monitoring of Power Transmission Systems

    … and stresses. A quasi-static and dynamic analysis are done on two sets of fixed axis spur gears and a planetary gear system using ABAQUS to analyze the stress, strain and gear mesh stiffness variation. In the second section, the vibrational patterns produced by a simple bevel gear system …

    calpoly Repository record for CAE Methods on Vibration-Based Health Monitoring of Power Transmission Systems (opens in a new tab)

  8. Wavelets based time-frequency analysis techniques in structural engineering

    … need to account for temporal evolution of their frequency content. Separate time analysis and frequency analysis by themselves do not fully describe the nature of these nonstationary dynamic loads. In the past few years, significant effort has been devoted to wavelets and time-frequency analysis. …

    rice Repository record for Wavelets based time-frequency analysis techniques in structural engineering (opens in a new tab)

  9. Robust reassignment techniques for time-frequency analysis of chirps and transients

    Time-varying signals, such as sound waves, low-frequency seismic vibrations, or electrical impulses in the human body, are often non-stationary. Because of this, standard spectral analysis methods, which assume stationarity, cannot be used for analyzing such signals because they discard the …

    lund Repository record for Robust reassignment techniques for time-frequency analysis of chirps and transients (opens in a new tab) Download PDF for Robust reassignment techniques for time-frequency analysis of chirps and transients (opens in a new tab)

  10. An EMI characterization and modeling study for consumer electronics and integrated circuits

    … in a LED TV is analyzed and modeled. Through joint time-frequency analysis, the drain-to-source voltage of the power MOSFET in the power factor correction (PFC) converter is identified as the dominant noise source of both CM and DM EMI below 1 MHz from the power supply. The current paths of DM …

    must-thes Repository record for An EMI characterization and modeling study for consumer electronics and integrated circuits (opens in a new tab)

  11. Vibration-Based Health Monitoring of Multiple-Stage Gear Train and Differential Planetary Transmission Involving Teeth Damage and Backlash Nonlinearity

    … model drastically reduces the computation time required by finite element methods to simulate realistic operation. The gears are considered rigid with elastic contact surfaces defined by a penalty based non-linear contact formulation. The third section examines a practical differential …

    calpoly Repository record for Vibration-Based Health Monitoring of Multiple-Stage Gear Train and Differential Planetary Transmission Involving Teeth Damage and Backlash Nonlinearity (opens in a new tab)

  12. Wavelet based response spectrum compatible synthesis of accelerograms and statistical linearization based analysis of the peak response of inelastic systems

    … are exploited to "surgically" modify the frequency content of seismic accelerograms to meet the commonly prescribed compatibility criteria. An example involving the modification of a suite of real recorded accelerograms to be used for the design of base-isolated buildings according to the …

    rice Repository record for Wavelet based response spectrum compatible synthesis of accelerograms and statistical linearization based analysis of the peak response of inelastic systems (opens in a new tab)

  13. Time and Frequency Evolution of the Precursors in Dispersive Media and their Applications

    … of the pulse inside the dispersive medium in the time domain. The problem of the time and frequency evolution of the precursors in 1DPC is studied, using the finite-difference time-domain (FDTD) techniques in conjunction with joint time-frequency analysis (JTFA). Our study clearly shows that the …

    toronto-retro Repository record for Time and Frequency Evolution of the Precursors in Dispersive Media and their Applications (opens in a new tab)

  14. Multi-physics investigation on the failure mechanism and short-time scale wave motion in flip-chip configuration

    … dispersive shock waves of extremely high frequency propagating in the package. The notions of high cycle fatigue, power density and joint time-frequency analysis were employed to characterize the waves and the various failure modes associated with the moving of these short-lived dynamical …

    tamu Repository record for Multi-physics investigation on the failure mechanism and short-time scale wave motion in flip-chip configuration (opens in a new tab)

  15. Vibration characteristics of single-family woodframe buildings

    … woodframe houses and to investigate the use of joint time-frequency technique in the vibration studies of woodframe houses. A variety of full-scale dynamic tests, such as shake table earthquake simulation, ambient and forced vibration tests, were conducted at the University of British Columbia …

    ubc Repository record for Vibration characteristics of single-family woodframe buildings (opens in a new tab) Download PDF for Vibration characteristics of single-family woodframe buildings (opens in a new tab)

  16. Improved Intermittent Clutter Filtering For Wind Profiler Radar

    … provide continuous wind measurements in real-time and most of the data are successfully assimilated in numerical weather prediction models. Although this is an obvious indication of maturity, practical experience has shown that further improvements are both possible and necessary. While the …

    bayreuth Repository record for Improved Intermittent Clutter Filtering For Wind Profiler Radar (opens in a new tab)

  17. Development Of Spine Injury Mechanisms, Response Corridors And Computational Human Model To Assess Mounted Occupant Injury During Underbody Blast Loading

    … pulses were defined using the peak velocity and time to peak velocity for seat and floor and by the presence of body armor. Six loading conditions were tested. The responses measured included linear Z acceleration and Y angular velocity at the thoracic (T1, T5, T8, T12) and sacral (S1-S2) spine. …

    wayne-thes Repository record for Development Of Spine Injury Mechanisms, Response Corridors And Computational Human Model To Assess Mounted Occupant Injury During Underbody Blast Loading (opens in a new tab)

  18. Blind Signal Detection and Identification Over the 2.4GHz ISM Band for Cognitive

    'It is not a lack of spectrum. It is an issue of efficient use of the available spectrum"--conclusions of the FCC Spectrum Policy Task Force. There is growing interest towards providing broadband communication with high bit rates and throughput, especially in the ISM band, as it was an ignition of …

    usf Repository record for Blind Signal Detection and Identification Over the 2.4GHz ISM Band for Cognitive (opens in a new tab)