Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Joint simulation"”.

  1. Design of real-time hip joint simulation

    This thesis aims to visualize a hip joint and its motion and use machine learning to predict the pathology of a hip joint given its movement during an average gait cycle using MATLAB in hopes of assisting clinicians in diagnosing hip conditions. There is a lack of software that can assist health …

    texas Repository record for Design of real-time hip joint simulation (opens in a new tab)

  2. JOINT SIMULATION OF CONTINUOUS AND CATEGORICAL VARIABLES FOR MINERAL RESOURCE MODELING AND RECOVERABLE RESERVES CALCULATION

    … changes gradually between rock-types. Therefore, jointly simulating these variables can improve confidence (reduce uncertainty) in a resource model. Also, resource classification and recoverable reserve calculation can significantly improve the understanding of the deposit and its economic …

    mtu Repository record for JOINT SIMULATION OF CONTINUOUS AND CATEGORICAL VARIABLES FOR MINERAL RESOURCE MODELING AND RECOVERABLE RESERVES CALCULATION (opens in a new tab)

  3. Modeling and control of wastegate equipped turbocharged engines

    … boost control. The method revolves around the joint simulation of the engine with Ricardo WAVE software and the control algorithm with Simulink®. A component by component modeling approach is outlined using WAVE, including an experimental approach for modeling the solenoid valve. Controls are …

    unm Repository record for Modeling and control of wastegate equipped turbocharged engines (opens in a new tab)

  4. Closed-loop Circulation Control for wind gust alleviation

    … (2D) CC aerofoil was analysed through CFD simulations and validated by existing experimental results from the literature, and a good agreement was observed. The actuation speed of the CC aerofoil was compared with a mechanical flap (aileron), it was found that the actuation speed of CC was …

    whiterose Download PDF for Closed-loop Circulation Control for wind gust alleviation (opens in a new tab)

  5. Stochastic characterization of flow and transport in networks

    … objective of this thesis is to analyze the joint uncertainty distributions of multiple water quality parameters in order to statistically characterize the baseline variability of water quality in a distribution network. The water quality modeling capability of EPANET is employed, and the …

    texas Repository record for Stochastic characterization of flow and transport in networks (opens in a new tab) Restricted access

  6. MODELING AND ANALYSIS FOR DRIVELINE JERK CONTROL

    … to meet these criteria. By using high-fidelity simulation tool such as AMESim®, it is now possible to accurately model the vehicle driveline to be tested for different scenarios. With Simulink®, one can develop an efficient torque-based control system to limit the driveline oscillations and the …

    mtu Repository record for MODELING AND ANALYSIS FOR DRIVELINE JERK CONTROL (opens in a new tab)

  7. On the spatial modelling of mixed and constrained geospatial data

    … continental crustal blocks should be modelled jointly with other continuous attributes (e.g. porosity, permeability, seismic velocity, mineral and geochemical compositions or pollutant concentration). These multivariate geospatial data normally have complex statistical and spatial relationships …

    edithcowan Repository record for On the spatial modelling of mixed and constrained geospatial data (opens in a new tab)

  8. Development of decellularised porcine osteochondral scaffolds as matrices for cell implantation

    … of the healthy biomechanical function of the joint. Potential for cost-effectiveness versus matrix assisted chondrocyte implantation was observed. The dimensions of the decellularised scaffolds were adapted to dimensions which are clinically appropriate for the treatment of large shallow …

    whiterose Download PDF for Development of decellularised porcine osteochondral scaffolds as matrices for cell implantation (opens in a new tab)

  9. Tribology of hemiarthroplasty

    … been investigated experimentally in an in- vitro simulation of HA. In a simple geometry HA model, the articular cartilage coefficient of friction, deformation, and wear have been examined in a cartilage pin on metal plate model. The loading time, contact stress levels, contact areas, stroke …

    whiterose Download PDF for Tribology of hemiarthroplasty (opens in a new tab)

  10. Ανάλυση της συμπεριφοράς στρωσιγενούς πετρώματος γύρω από υπόγεια ανοίγματα

    … the specific cases that are analyzed. Further, simulation of centrifuge laboratory tested bolted rock beams is performed using Mohr-Coulomb and Barton-Bandis failure criteria. The dinstinct element method, in combination to the finite differences method is used to perform the numerical …

    greece Repository record for Ανάλυση της συμπεριφοράς στρωσιγενούς πετρώματος γύρω από υπόγεια ανοίγματα (opens in a new tab)

  11. Modelagem e simulação da articulação temporomandibular

    A simulação de articulações baseada em anatomia, além de melhorar o realismo de animações do corpo humano na área da computação gráfica, tem se tornado uma importante ferramenta no auxílio ao diagnóstico médico e nas estimativas de resultados pósoperatórios, simplificando e melhorando o …

    brazil-ufrgs Repository record for Modelagem e simulação da articulação temporomandibular (opens in a new tab)

  12. Advancing TKA Biomechanics: From Joint Simulator to Boundary Condition Development

    … focused on the development of a novel whole knee joint simulator capable of simultaneous tibiofemoral and patellofemoral knee loading. This simulator employs custom fixturing to facilitate dynamic, unconstrained, muscle-driven PF articulation alongside controlled TF contact mechanics. Validation …

    denver Repository record for Advancing TKA Biomechanics: From Joint Simulator to Boundary Condition Development (opens in a new tab)

  13. FE-analysis of bolted joints: Correlation between simulation and physical test data

    A correlation problem was found in a bolted joint when results obtained by physical test were compared to simulation results of a mudguard bracket mounted on a side skirt. The simulation predicts failure in another bolt than the bolt that fails in the physical tests. New rig tests have been …

    chalmers Repository record for FE-analysis of bolted joints: Correlation between simulation and physical test data (opens in a new tab)

  14. Optimising surgical training in primary total hip replacement

    … This thesis aims to develop and evaluate novel simulation training methods to improve surgeon performance and patient outcomes in elective primary THR.</p> <p>A retrospective case series of 348 primary THR demonstrated that operative times and postoperative radiographs cannot be solely used in …

    oxford Repository record for Optimising surgical training in primary total hip replacement (opens in a new tab)

  15. How the Surface Morphology of Electron Beam Melted Additive Manufactured Grade 5 Titanium Affects Adhesive Bonding Shear Strength

    … and D3165 (concentrically) loaded single-lap-joint (SLJ) standards. The samples were macro and micro-roughness tested using a profilometer, with the nano surface roughness features classified and defined by scanning electron microscope. Both a smooth and NaTESI anodised vertical surface were …

    auckland-tech Repository record for How the Surface Morphology of Electron Beam Melted Additive Manufactured Grade 5 Titanium Affects Adhesive Bonding Shear Strength (opens in a new tab)