Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 82 for “"Joint torque"”.

  1. Joint Torque Feedback for Motion Training with an Elbow Exoskeleton

    Joint torque feedback (JTF) is a new and promising means of kinesthetic feedback to provide information to a person or guide them during a motion task. However, little work has been done to apply the torque feedback to a person. This project evaluates the properties of JTF as haptic feedback, …

    vt Repository record for Joint Torque Feedback for Motion Training with an Elbow Exoskeleton (opens in a new tab)

  2. Relative importance and plasticity of anatomical and neuromuscular factors affecting joint torque production

    … concentric and eccentric knee extensor torque (Study 1); (ii) whether the change in strength following a 10-week strength training program is associated with changes in specific anatomical and neuromuscular variables (Study 2a); (iii) whether anatomical and neuromuscular adaptations are …

    edithcowan Repository record for Relative importance and plasticity of anatomical and neuromuscular factors affecting joint torque production (opens in a new tab)

  3. Development of a Finite Element Analysis (FEA) Model for Predicting Elbow Torque of the Apollo A7LB Extravehicular Activity (EVA) Spacesuit Pressurized Sleeve

    … mobility is largely driven by the design of joints such as in the knees, shoulders, ankles, waist, and elbows. In the Apollo A7L/A7LB spacesuits, full circumferential rubber-dipped nylon convolutes were utilized in these joint locations. Understanding the Apollo elbow joint design’s mobility, …

    tamu Repository record for Development of a Finite Element Analysis (FEA) Model for Predicting Elbow Torque of the Apollo A7LB Extravehicular Activity (EVA) Spacesuit Pressurized Sleeve (opens in a new tab)

  4. Optimization-Based Inverse Dynamics to Reduce Errors in Estimated Joint Torques

    … the potential to significantly reduce errors in joint torque calculations.

    uiuc Repository record for Optimization-Based Inverse Dynamics to Reduce Errors in Estimated Joint Torques (opens in a new tab)

  5. Design of a Robotic Arm for Validating an FEA Model of Expected Elbow Torque in an Extravehicular Activity Suit Sleeve

    … to measure fit and performance metrics such as joint torque and contact pressure between the suit and the inhabitant. In this research, the Robotic Arm for Evaluating Spacesuit Torque and Contact (RAESTAC) was developed to capture joint torque at the elbow joint of a Size 4 EMU pressure garment …

    tamu Repository record for Design of a Robotic Arm for Validating an FEA Model of Expected Elbow Torque in an Extravehicular Activity Suit Sleeve (opens in a new tab)

  6. Understanding the effect of objective function weightings on posture prediction: application to predicting lifting postures in un-fatigued and fatigued states

    … including the minimization of: Discomfort, Total Joint Torque and, Maximum Joint Torque. The different objective functions represent performance measures to be minimized in order to predict the design variables, in this case joint angles, within the avatar’s available degrees of freedom. …

    waterloo Repository record for Understanding the effect of objective function weightings on posture prediction: application to predicting lifting postures in un-fatigued and fatigued states (opens in a new tab)

  7. Prediction of muscle force patterns in elbow flexion/extension and comparison with electromyography

    … which were then used to calculate the net elbow joint torque. The methodology used in the experiments to study muscle contribution to flexion/extension at the elbow joint is discussed and the results of the experiments are presented. These torques were then partitioned among the muscles studied …

    texas Repository record for Prediction of muscle force patterns in elbow flexion/extension and comparison with electromyography (opens in a new tab)

  8. Biomechanical weight transfer of gait initiation in individuals post-stroke

    … the relationships between multiplanar lower limb joint torque production and weight transfer characteristics during gait initiation. Nine participants with stroke participated in this study. Participants stood on two adjacent force platforms that were embedded in the floor. A light cue on the left …

    texas Repository record for Biomechanical weight transfer of gait initiation in individuals post-stroke (opens in a new tab)

  9. THE INFLUENCE OF PASSIVE ANKLE JOINT POWER ON BALANCE RECOVERY

    … young adults primarily utilizing their ankle joint and older adults utilizing their hip. The role of passive ankle joint power in balance recovery is unknown. Therefore, we conducted three studies. In Study 1, we investigated the role of passive ankle joint power in balance recovery of young …

    mtu Repository record for THE INFLUENCE OF PASSIVE ANKLE JOINT POWER ON BALANCE RECOVERY (opens in a new tab)

  10. Enhancing Spacesuit Fit and Mobility: An Approach to Evaluating and Optimizing EMU Lower Arm Assembly Patterns Using Finite Element Analysis

    … and energy expenditure is directly tied to the torque needed for joint deformation. Poorly fitting suits, especially at the joints, can lead to higher risk of injury and fatigue during EVAs. To address the critical issue of spacesuit fit and mobility, a customizable and iterative computer …

    tamu Repository record for Enhancing Spacesuit Fit and Mobility: An Approach to Evaluating and Optimizing EMU Lower Arm Assembly Patterns Using Finite Element Analysis (opens in a new tab)

  11. Industrial automation and control in hazardous nuclear environments

    … based on user-specified parameters. 2. Joint torque monitoring 3. Online motion planning for contact tasks 4. Object-in-hand industrial manufacturing 5. Grasping and handling of nuclear material 6. Software compliance via robust nonlinear control methods A high-bandwidth collision …

    texas Repository record for Industrial automation and control in hazardous nuclear environments (opens in a new tab)

  12. Changes in leg and joint coordination during locomotor adaptation in amputees and able-bodied controls

    … I investigated changes in coordination at the joint and leg level as subjects adapted to split-belt treadmill walking and altered visual feedback in hopping. As subjects adapted to increase leg force, they preferentially reduced deviations in joint torque that affected leg force. Once peak leg …

    gatech Repository record for Changes in leg and joint coordination during locomotor adaptation in amputees and able-bodied controls (opens in a new tab)

  13. How do we accelerate while running?

    … are well established in terms of lower extremity joint kinetics as is the direct relationship between these variables and running speed. Many studies have investigated the differences in these variables when running velocity was increased in discrete increments but investigations of accelerated …

    ecu Repository record for How do we accelerate while running? (opens in a new tab)

  14. Requirements for effective collision detection on industrial serial manipulators

    … HRI. Many robots are now being fitted with joint torque sensors to enable effective human-robot collision detection. Many existing and off-the-shelf industrial robotic systems are not equipped with these sensors. This work presents and demonstrates a method for effective collision detection …

    texas Repository record for Requirements for effective collision detection on industrial serial manipulators (opens in a new tab)

  15. Determination of muscle, ligament and articular forces at the knee during a simulate skating thrust

    A number of investigators have determined the joint forces acting at the hip and knee for normal human locomotion as related to the design of prosthetic devices. This research has been extended to allow the calculation or estimation of the muscular and ligamentous forces operating at the knee joint …

    ubc Repository record for Determination of muscle, ligament and articular forces at the knee during a simulate skating thrust (opens in a new tab) Download PDF for Determination of muscle, ligament and articular forces at the knee during a simulate skating thrust (opens in a new tab)

  16. Calibration of Motor Torque constant and Characterization of dynamics response of dVRK

    … current measurements that can be converted into Joint Torques using ‘Torque Constant’ (from the motor datasheet) and considering the effects of gearing. Motor torques can be converted to joint torques using a decoupling matrix. The thesis focuses on experimentally measuring the torque constant by …

    jhu Repository record for Calibration of Motor Torque constant and Characterization of dynamics response of dVRK (opens in a new tab)

  17. Identification of Human Walking Patterns Using 3-D Dynamic Modeling

    … chain consisting of rigid links and revolute joints. Human walking patterns contain information like identity, presence of physical disability and loading conditions of a person like carrying a backpack. We have extracted some of these information and have used our model to discriminate …

    maryland Repository record for Identification of Human Walking Patterns Using 3-D Dynamic Modeling (opens in a new tab)

  18. Locomotor recovery following gait training with treadmill lateral oscillation : a case study in an individual with chronic stroke

    … step length (13%) were observed. Increased knee joint torque (15%) in the paretic leg, might have potentially contributed to the improvements in balance after training. These findings underscore the potential benefits of treadmill training with oscillation in stroke rehabilitation, offering …

    texas Repository record for Locomotor recovery following gait training with treadmill lateral oscillation : a case study in an individual with chronic stroke (opens in a new tab)

  19. Physics infused human motion dynamics and its application in computational wearable design

    … and moment (GRF&M), center of pressure (CoP), joint torque, and body trajectories, is essential for accurately analyzing human movement dynamics. This dissertation introduces methodologies that integrate dynamics into human body movements and its real-world applications. Specifically, it …

    bu Repository record for Physics infused human motion dynamics and its application in computational wearable design (opens in a new tab)

Page 1 of 5