Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"Joints (Engineering)"”.
-
Statistical system identification of structures with flexible joints
The flexibility of welded joints is an important issue in design of car bodies. Two generic, 3-D, design-oriented models (simple and complex) are developed to represent the compliant behavior of multibranch flexible joints. The simple model consists of torsional springs restraining the relative …
-
Bolted joint studies in GRP
… behavior in countersunk, single-lap bolted joints between glass/vinylester resin laminates and steel panels. Additionally, the effect of bolt clampup force relaxation on the bearing strength of such joints was studied. Specially-instrumented bolts were used to measure clampup force …
-
Characterization of adhesively bonded joints using bulk adhesive properties
Though using bulk adhesive properties to predict adhesively bonded joint response has yet to be proven infallible, based upon the success of previous works, this effort attempts to shed some light on the stresses present in a typical automotive bonded joint. Adhesive material properties obtained in …
-
The effect of gap size on performance of metal plated joints in compression
Metal plate splice joints with gaps between butting pieces of lumber were tested in compression to evaluate the effect of gap size on joint serviceability performance. The current design methodology for compression splice joints was also evaluated. Specimens representing floor and roof trusses, …
-
Evaluation of deck fasteners functioning as shear connectors for composite steel joists
The use of deck fasteners as shear connectors for composite open web steel joists is studied. Results of thirty-six push-off tests are evaluated in terms of strength and behavior. Six types of deck fasteners are considered. They are: 1. #12-24 Teks/5 self-drilling, self-tapping screws. 2. 1/4-14 …
-
Withdrawal and combined load capacity of threaded fastener wood joints
… models of the capacity of threaded fastener joints were developed from extensive experimental tests. One study objective was to develop a general model of threaded fastener withdrawal strength applicable to joints containing fasteners with widely varying thread geometries. A total of 419 …
-
Nonlinear axial stiffness characteristics of axisymmetric bolted joints
… of the current design theory for bolted joints which is based on a linear, one-dimensional stiffness analysis is presented. A detailed nonlinear finite element analysis of a bolted joint conforming to ANSI standards was performed. The finite element results arc presented in the classical …
-
The durability of adhesive joints: an engineering study
… is illustrated with the case of rubber-to-steel joints exposed to a cathodic potential in seawater. The mechanical analysis of a durability specimen is presented and a procedure for debond prediction is suggested.
-
Laser machining of polymeric composites for joint preparation
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1993
-
The effect of elbow restraint on pressure transients
… University. Department of Civil and Sanitary Engineering, 1984
-
Constitutive modeling and plastic analysis with application to beam-to-column connections.
Analysis and design of connections, such as beam-to-column connections, pose various complexities such as nonlinear behavior of material and geometric condition, irregularities in geometry and boundary condition. The main purpose of these types of connections is to provide adequate structural …
-
Single shear vs. double shear for nails in lateral loading
… were conducted on three-member southern pine joints to determine (1) the relationship of the lateral load-carrying capacity of nails in single and double shear, and (2) to develop a basis for structural design data for laterally loaded nails in double shear applicable whenever deformation is a …
-
Response of multiple fastener composite joints: numerical and experimental results
periments and predictions was found to be excellent around the net-section region. Although predictions for other strains were not as good, they were within the range of experimental data. Distribution of contact stresses between the pins and the hole edges was also studied. Numerical analysis …
Page 1 of 5