Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"KOH etching"”.

  1. Koh etching of silicon

    In this research, a series of comparative etching experiments on silicon wafers have been carried out using potassium hydroxide (KOH) for different experimental etching conditions for concentration, temperature and time on (100) orientation p-type silicon wafers. Besides the basic etching …

    njit Repository record for Koh etching of silicon (opens in a new tab)

  2. Enhanced Fabrication of Microdroplet Generator Nozzle Arrays: Optimizing KOH Etching for Microfluidic Applications

    … a critical fabrication step, anisotropic wet etching of pyramidal nozzles using a basic potassium hydroxide (KOH) solution. Given the integral role of nozzle geometry in device operation, high-precision techniques including Reactive Ion Etching (RIE), Deep Reactive Ion Etching (DRIE), and KOH …

    wustl Repository record for Enhanced Fabrication of Microdroplet Generator Nozzle Arrays: Optimizing KOH Etching for Microfluidic Applications (opens in a new tab)

  3. A Study on the Nature of Anomalous Current Conduction in Gallium Nitride

    … characteristics is presented in molten KOH etching, as evidenced by CAFM measurements, Schottky diodes, and MODFET's. The aim of this study is to identify anomalous conduction mechanisms, the likely cause of anomalous conduction, and a method for improving the conduction characteristics. …

    vcu Repository record for A Study on the Nature of Anomalous Current Conduction in Gallium Nitride (opens in a new tab)

  4. Fabrication of High Solid Silicon Microneedles Based on Anisotropic Etching by Potassium Hydroxide

    … solid silicon microneedles fabrication based on KOH anisotropic etching, aiming at finding a controllable way to fabricate 500 μm high microneedles with good height uniformity and tip sharpness. During this research, 200nm low-stress LPCVD SiNx is used as KOH etching mask; mask shape is …

    waterloo Repository record for Fabrication of High Solid Silicon Microneedles Based on Anisotropic Etching by Potassium Hydroxide (opens in a new tab)

  5. Soft Lithographic Patterning on Silicon

    … annealed in air, these films were placed into KOH etching solutions and the resulting grain structures were examined via AFM. The data showed that different mole fractions created different grain structures after exposure to the etching solution. Additionally, the resulting etch structures were …

    uiuc Repository record for Soft Lithographic Patterning on Silicon (opens in a new tab)

  6. A silicon knife design and fabrication

    … techniques including anisotropic and isotropic etching of silicon, plasma dry etching and chemical etching dry oxidation, and KOH etching.

    njit Repository record for A silicon knife design and fabrication (opens in a new tab)

  7. KOH anisotropic silicon etching for MEMS accelerometer fabrication

    … silicon by anisotropic potassium hydroxide (KOH) wet etching. In low cost bulk micromachining of silicon for MEMS (Micro Electro Mechanical Systems), anisotropic wet etching of single crystalline silicon in aqueous KOH solutions is a technically important process. Anisotropic etching of …

    aalto Repository record for KOH anisotropic silicon etching for MEMS accelerometer fabrication (opens in a new tab)

  8. Integration of Benzocyclobutene Polymers and Silicon Micromachined Structures Fabricated with Anisotropic Wet Etching

    … grooves in silicon using potassium hydroxide (KOH). Gold (Au) is used as an etch mask to protect the low-k film during the highly-corrosive, long, and high-temperature KOH etching process. Metal/BCB adhesion is a key parameter in this masking design. Adhesion of the BCB and metal mask was …

    maryland Repository record for Integration of Benzocyclobutene Polymers and Silicon Micromachined Structures Fabricated with Anisotropic Wet Etching (opens in a new tab)

  9. Design and fabrication of lateral silicon germanium heterojunction bipolar transistors

    … and control of selective epitaxial growth and etching techniques and each of these two important processes have been developed. Selective epitaxy growths on different crystallographic planes and seed window alignments have been carried out, and, as would be expected, selective epitaxial growth …

    soton Download PDF for Design and fabrication of lateral silicon germanium heterojunction bipolar transistors (opens in a new tab)

  10. The design and fabrication of a thermal microprobe integrated on an atomic force microscope probe tip

    … are formed by a combination of RIE, wet chemical etching, and oxidation sharpening, which makes the tips atomically sharp. The hot thermocouple junction is formed by controlled photoresist coating. The metal layers are sputtering deposited and the cantilevers are released by KOH etching and RIE. …

    njit Repository record for The design and fabrication of a thermal microprobe integrated on an atomic force microscope probe tip (opens in a new tab)

  11. Characterization and mapping of crystal defects in silicon carbide

    … of wafers etched with Potassium Hydroxide (KOH). Etching in molten KOH at 450 C enhances the defects and allows distinguishing micropipes and dislocation in dark field or bright field microscopic images, depending on the semiconductor doping level. Computer image analysis of the microscopic …

    njit Repository record for Characterization and mapping of crystal defects in silicon carbide (opens in a new tab)

  12. Design and fabrication of a microfluidic device for polymerase chain reaction application

    … Pyrex substrates. Silicon bulk micromachining by KOH etching has been used to etch the reaction chambers and connection channels. </span></p> <p><span >A micro peristaltic pump integrated in the micro PCR chip has been successfully fabricated and characterized, after the improvement in the pump …

    soton Download PDF for Design and fabrication of a microfluidic device for polymerase chain reaction application (opens in a new tab)

  13. Geometric Effects on the Wear of Microfabricated Silicon Journal Bearings

    … the inherent properties of deep reactive ion etching as part of the current MEMS fabrication process employed in this dissertation. The investigation is conducted in two phases, each characterized by novel microbearing designs, fabrication processes, experimental test methodologies, and …

    rit Repository record for Geometric Effects on the Wear of Microfabricated Silicon Journal Bearings (opens in a new tab)

  14. Microfabricated Shear -Sensitive Tactile Sensor: Development and Application

    … integrated circuit (IC) and MEMS technologies. KOH etching is used to make the diaphragm. Low-temperature wafer bonding is used to seal the cavities. EPON su-8 is used to construct the mesa. Silicon isotropic etching is used to release PI/Al/PI leads to realize flexible package. An analytical …

    uiuc Repository record for Microfabricated Shear -Sensitive Tactile Sensor: Development and Application (opens in a new tab)

  15. Seedless electroplating: adhesion and charge transfer in galvanic processes

    … on Si(111) structured in n Si(100).<br>Etching processes are compared with respect to the substrate’s surface energy, roughness and wetting. KOH etching increases the substrates wettability with respect to those etched by HF or BHF. A proposed process consists of providing a specific …

    freiburg-diss Repository record for Seedless electroplating: adhesion and charge transfer in galvanic processes (opens in a new tab)

  16. HF/HNO3 tirpaluose bei kombinuotame KOH ir plazmos procese ėsdintų lydyto silicio dioksido padėklų optinių ir paviršiaus savybių tyrimas /

    … various methods are being used such as chemical etching using acid or alkali, plasma, or reactive ion etching. During this research combination of plasma ion and chemical KOH etching including HCl leaching were used, to identify methods’ influence on transmission, surface roughness, flatness, …

    vilnius Repository record for HF/HNO3 tirpaluose bei kombinuotame KOH ir plazmos procese ėsdintų lydyto silicio dioksido padėklų optinių ir paviršiaus savybių tyrimas / (opens in a new tab)

  17. The Quest for Tunability: Nano-Optics of Undulations and Resonances (N.O.U.R.) on Pliable and Rigid Substrates

    … beam lithography (EBL), followed by reactive ion etching, KOH etching and metallization. Detailed analytical-computational analysis of key properties of the graded triangular gratings are presented, illustrating the advantages of these gratings including analyte infiltration of high field regions. …

    toronto-retro Repository record for The Quest for Tunability: Nano-Optics of Undulations and Resonances (N.O.U.R.) on Pliable and Rigid Substrates (opens in a new tab)

  18. Influence of Multiscale Substrate Roughness on Nanoscale Tribological Behavior of Graphene Interfaces

    … mechanical scratching and potassium hydroxide (KOH) etching to generate a range of directional and non-directional morphologies. Surface topography was characterized using optical microscopy, atomic force microscopy (AFM), and white light interferometry (WLI). Roughness was quantified using …

    calgary Repository record for Influence of Multiscale Substrate Roughness on Nanoscale Tribological Behavior of Graphene Interfaces (opens in a new tab)

  19. Light trapping for electron-beam evaporated polycrystalline silicon solar cells

    … itself has been studied in this thesis. A spray etching method is designed for glass texturing, but it is proved not to be suitable for producing light trapping textures. Light trapping is then implemented by texturing of the rear surface of e-beam poly-Si films deposited on planar glass. …

    unsw Repository record for Light trapping for electron-beam evaporated polycrystalline silicon solar cells (opens in a new tab)

  20. Design Of A Device Independent Computer Graphic Software Package

    … of interference lithography and wet-­chemical KOH etching, vertically-standing, periodic Si rectangular slabs are fabricated with a slab thickness ranging from a few nm to ~ 200 nm. Each slab has its three principal axes in the <110>, <112> and <111> direction, and each slab surfaces is …

    unm Repository record for Design Of A Device Independent Computer Graphic Software Package (opens in a new tab)

Page 1 of 2