Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Kanthal"”.

  1. Development, Characterization and Testing of Traditonal and Advanced Nuclear Fuel Cladding Materials

    Kanthal D and FeCrAl alloys in general, are prospective candidates as accident tolerant nuclear fuel cladding materials. The work presented herein focuses on applying two techniques of severe plastic deformation, equal channel angular pressing (ECAP) and high-pressure torsion (HPT), as means of …

    must-thes Repository record for Development, Characterization and Testing of Traditonal and Advanced Nuclear Fuel Cladding Materials (opens in a new tab)

  2. Development of curing and self-healing methodologies of polymeric composites and study of the fiber-matrix interphasial interactions developed

    … between Joule-cured and oven-cured specimens. Kanthal resistance wires were used, embedded in a resin plate, acting as the heating elements. Accurate temperature-time and temperature-position diagrams for fixed positions and times were created based on these experimental findings. By …

    greece Repository record for Development of curing and self-healing methodologies of polymeric composites and study of the fiber-matrix interphasial interactions developed (opens in a new tab)

  3. Characterization Of Evaporative Metal Bonding In Superalloys For Use In Gasified Coal Turbine Generators

    The diffusion bonding of Kanthal APMT, CM247LC, and Rene 80 was studied. The objective of the first part of this work was to create diffusion bonded test samples of Kanthal APMT, CM247LC, and Rene 80 using a 25μm thick zinc interlayer at varying times and temperatures. Then, using scanning electron …

    nodak Repository record for Characterization Of Evaporative Metal Bonding In Superalloys For Use In Gasified Coal Turbine Generators (opens in a new tab)

  4. Plasma-Catalysis for Chemical Synthesis

    … configuration. A novel Ni/ZrO2 catalyst coated Kanthal electrode was prepared, and the DRM performance was evaluated for different metal loadings and compared to the uncoated Kanthal electrode. No significant improvement in the conversions was found, however, the plausible explanation for this …

    houston Repository record for Plasma-Catalysis for Chemical Synthesis (opens in a new tab) Embargoed until 2027-12-01

  5. A Corrosion Study on a Novel FeCrAl Alloy for Water Wall Applications in Waste-Fired Boilers

    … currently under consideration. One of these is Kanthal EF101. The aim for thesis is to evaluate the corrosion rate for Kanthal EF101 when exposed to two heavy metal compounds, PbO or PbCl2 and compare it with a Ni-based alloy (Alloy625) and low-alloyed steel (T22). For this, multiple factors …

    chalmers Repository record for A Corrosion Study on a Novel FeCrAl Alloy for Water Wall Applications in Waste-Fired Boilers (opens in a new tab)

  6. Parametric studies on thermal efficiency and NOx emissions of a hydrogen-fuelled domestic cooktop burner

    … conversion of NO-to-NO2 is also examined using a Kanthal rod and a water-cooled sampling probe. The performance of a non-premixed hydrogen burner was compared against a conventional partially premixed natural gas cooktop, and the potential of a partially premixed hydrogen burner design was …

    adelaide Repository record for Parametric studies on thermal efficiency and NOx emissions of a hydrogen-fuelled domestic cooktop burner (opens in a new tab)

  7. Direct and inverse heat conduction in rock materials using the finite element method

    … of hollow Dresser Basalt cylinders heated by a Kanthal wire heater. The internal temperature measurements were used in conjunction with the inverse method to obtain surface temperatures. The surface temperatures were used for thermal stress calculations to obtain time to fracture for an infinite …

    must-thes Repository record for Direct and inverse heat conduction in rock materials using the finite element method (opens in a new tab)

  8. Investigation of the fretting wear performance of accident tolerant cladding options for light water reactors

    … reactor power plants is grid-to-rod fretting. Kanthal advanced powder metallurgy technology or APMT, an FeCrAl steel alloy, and a braided SiC fiber, Chemical Vapor Infiltration SiC matrix (SiC/SiC) cladding by General Atomics are investigated as alternatives to conventional fuel cladding in a …

    gatech Repository record for Investigation of the fretting wear performance of accident tolerant cladding options for light water reactors (opens in a new tab)

  9. Characterization of oxidation layers on novel nuclear fuel cladding alloys

    … four alloys: 1) ferritic Fe-Cr-Al-Mo alloy Kanthal APMT, 2) ferritic Cr-Mo-V steel T91, 3) Ni-Cr solid solution strengthened alloy Inconel 600 (A600), and 4) austenitic Cr-Ni alloy stainless steel 304 (SS304). Kanthal APMT develops a uniform, compact α-Al2O3 passivating layer in both air and …

    iastate Repository record for Characterization of oxidation layers on novel nuclear fuel cladding alloys (opens in a new tab)

  10. BULK NANOSTRUCTURED STEELS FOR NUCLEAR REACTOR AND EXTREME ENVIRONMENT APPLICATIONS

    … bulk ultra-fine grained and nanocrystalline Kanthal-D [KD; Fe-21Cr-5Al-0.026C (wt.%) alloy] which resulted in an improvement in strength of up to 3 times their nominal strength from grain boundary strengthening, and dislocation strengthening. Dynamic recovery was promoted due to ECAP at 520 …

    must-thes Repository record for BULK NANOSTRUCTURED STEELS FOR NUCLEAR REACTOR AND EXTREME ENVIRONMENT APPLICATIONS (opens in a new tab)

  11. Analysis of advanced vapor source for cadmium telluride solar cell manufacturing

    … processing of CdS/CdTe solar cells. Nichrome and Kanthal A1 were primarily selected for this application at temperature of 720 °C in vacuum with oxygen partial pressure. Research on oxidation effects and life due to oxidation as well as creep deformation was done, and Nichrome was found more …

    colostate Repository record for Analysis of advanced vapor source for cadmium telluride solar cell manufacturing (opens in a new tab)

  12. Application of nanostructured emitters for high efficiency lighting

    … study comparing morphologies of CNT films on Kanthal wire, with their field emission properties, and as such offers ways to design better cylindrical emitter devices. A low turn-on field was achieved (0.35 V/µm), the field emission results have been explained using a simple model, and a …

    oxford Repository record for Application of nanostructured emitters for high efficiency lighting (opens in a new tab)

  13. Design and Investigation of Clean Energy Materials: From Stable Perovskites to Economical Catalysts for Oxygen Evolution Reaction

    … of a commercially available FeAlCr alloy (Kanthal) as an affordable catalyst in an acidic medium. I conclude by offering my perspective on the future directions of the outlined work, thereby delivering the desired efficient, durable, and affordable next-generation materials.

    toronto-retro Repository record for Design and Investigation of Clean Energy Materials: From Stable Perovskites to Economical Catalysts for Oxygen Evolution Reaction (opens in a new tab)

  14. Quantifying Power Loading of Self-Supported Carbon Nanotube Fiber Devices for Gas Heating

    … utilize Joule heating of metal alloys (e.g. Kanthal or Nichrome) to transfer heat to flowing gases. Carbon nanotube fibers (CNTFs) are promising options to replace metal alloys as next-generation electrothermal heaters because the CNTF have similar electrical properties while also offering …

    rice Repository record for Quantifying Power Loading of Self-Supported Carbon Nanotube Fiber Devices for Gas Heating (opens in a new tab)

  15. Development and Validation of a Modular, Multi-point Phi Meter for Measurement of Global Equivalence Ratio

    … steel ½” tubes which are heated using a Kanthal A-1 heating wire combustor. The module also contains a temperature controller for the furnace, heaters on each sample line to prevent condensation, and sheet metal enclosures to hold the insulation and prevent the electronics from …

    maryland Repository record for Development and Validation of a Modular, Multi-point Phi Meter for Measurement of Global Equivalence Ratio (opens in a new tab)

  16. Comparative studies of the oxidation of MoSi₂ based materials

    … available, MoSi₂ based heating elements, i.e. Kanthal Super (labelled by the manufacturer as KS-1700, KS-1800, KS-1900, KS-ER and KS-HT) were used in the experiments. It was found that the oxidation behavior of different materials under investigation depended strongly on their chemical and …

    ubc Repository record for Comparative studies of the oxidation of MoSi₂ based materials (opens in a new tab) Download PDF for Comparative studies of the oxidation of MoSi₂ based materials (opens in a new tab)

  17. Isothermal and cyclic oxidation behaviour of alloys for high temperature applications

    … Inconel 625 and the Fe-based superalloy Kanthal APMT. 304 and 316 stainless steel are the most commonly used stainless steels in elevated temperature environments, while the other three were chosen because of their known ability to provide significant resistance to high temperature …

    qu-belfast Repository record for Isothermal and cyclic oxidation behaviour of alloys for high temperature applications (opens in a new tab) Download PDF for Isothermal and cyclic oxidation behaviour of alloys for high temperature applications (opens in a new tab)